After how many kilometers should car tires be replaced?

1 Answers
HaileyRose
07/29/25 11:31am
Car tires should be replaced after driving 60,000 to 80,000 kilometers. Tires are typically made of wear-resistant rubber materials and can be classified into solid tires and pneumatic tires, with pneumatic tires consisting of inner tubes and outer tires. The functions of tires: 1. Support the entire weight of the vehicle and bear the load of the car; 2. Transmit traction and braking torque to ensure the adhesion between the wheels and the road surface; 3. Reduce and absorb vibrations and impacts during driving, avoiding severe vibrations and premature damage to car components; 4. Adapt to the high-speed performance of the vehicle; 5. Reduce noise during driving. Car tire maintenance methods: 1. Regularly check tire pressure; 2. Remove debris from tire treads; 3. Inspect tire wear and replace them promptly based on wear conditions; 4. Perform four-wheel rotation, which ensures even force distribution across all four tires and prevents excessive wear.
Was this review help?
2
3
Share
More Forum Discussions

What are the engine specifications of the Range Rover Sport?

The engine specifications vary across different models of the Range Rover Sport. Below is a detailed introduction to the engine parameters of the Range Rover Sport: 1. 3.0L6-SE and 3.0L6-HSE-DYNAMIC: These two models are equipped with a low-power version of the 3.0T inline 6-cylinder twin-turbocharged engine, paired with an 8-speed automatic transmission, delivering a maximum power of 265KW and a maximum torque of 495N·m. 2. 3.0L6-HST: This model features a high-power version of the 3.0T inline 6-cylinder twin-turbocharged engine, paired with an 8-speed automatic transmission, producing a maximum power of 294KW and a maximum torque of 550N·m. 3. 5.0V8-SVR: This model is powered by a 5.0-liter V8 supercharged engine, paired with an 8-speed automatic transmission, generating a maximum power of 423KW and a maximum torque of 700N·m.
5
4
Share

How to Turn on the Headlights of Elysee?

The method to turn on the headlights of Elysee is as follows: 1. Turn forward one notch for the small lights, also known as the parking lights. Turn forward two notches for the low beams, mainly used for nighttime urban driving. Push forward for the high beams, and pull back to switch back to the low beams. 2. Push the light control lever forward once for the high beams, used for nighttime driving on roads outside urban areas. When an oncoming vehicle approaches, switch to low beams at least 150 meters away to prevent dazzling the other driver and avoid accidents. 3. Lift the light control lever forward and upward once for the right turn signal, and push it downward and to the left for the left turn signal, used for changing directions. The lever will automatically reset when the car straightens. 4. Between the dashboard and the co-driver's panel, there are two light control switches. One is the fog light, used for driving in foggy conditions. The other is the hazard signal light, which, when activated, causes all four turn signals to flash simultaneously. This is used when entering hazardous areas or during adverse weather conditions to alert others to maintain a safe distance and avoid overtaking.
13
1
Share

Does the factory S3 have exhaust sound?

Audi S3 in factory dynamic mode has exhaust sound. Here is the relevant introduction of Audi S3: 1. S3 is divided into three modes: comfort, auto, and dynamic, with the sound gradually increasing. When the S3 is started, you can immediately hear its low-pitched and full-bodied exhaust sound. 2. Appearance: The S3 comes with a sporty body kit, and the front grille is equipped with an aluminum alloy lower lip. The front grille is replaced with aluminum metal strips with the "S3" logo, representing its identity. The sharp lines of the rear lights give the car a more rugged and sporty look. 3. The Audi S3 is equipped with leather seats, featuring a spliced design on the surface, with suede material used on the seat cushions and backrests to increase friction and help maintain posture during driving. 4. Power: The S3 is equipped with a 2.0T turbocharged direct injection engine, with a maximum power of 213kW/5400-6500rpm and a maximum torque of 380Nm/1850-5300rpm. It is paired with a 7-speed dual-clutch transmission.
14
2
Share

What kind of four-wheel drive system does the Touareg use?

Volkswagen Touareg uses the 4Motion four-wheel drive system. The relevant introduction of the Touareg four-wheel drive system is as follows: 1. The four-wheel drive systems on Volkswagen SUV models include two types, namely 4Motion and 4xMotion, among which the 4Motion four-wheel drive system is applied to the current Volkswagen Tiguan and Touareg. 2. The 4xMotion four-wheel drive system is the standard four-wheel drive system for the first-generation Touareg four-wheel drive models. This is the older four-wheel drive system, which is very similar to Porsche's PTM system. A transfer case with a multi-plate clutch is installed behind the output shaft of the transmission, and the multi-plate clutch is used to lock the central differential. 3. 4Motion has one less 'x' than 4xMotion, and its performance is slightly weaker because this system is not equipped with a central differential. This system can only be considered a part-time four-wheel drive system. 4. The 4Motion system used in the Touareg uses a transfer case with a Torsen differential. Since there is no multi-plate clutch, this four-wheel drive system cannot manually lock the Torsen differential.
10
3
Share

How to Adjust the Seat in a Buick LaCrosse?

Here are the methods for adjusting the seat in a Buick LaCrosse: 1. Locate the switch on the side of the seat. High-end models use electric buttons for adjustment, while lower-end models use manual levers. 2. Adjust the seat forward and backward, the seat cushion up and down, and the backrest angle. Below is additional information on adjusting car seats: 1. The correct seat height should be adjusted so that the driver's view is not obstructed by the steering wheel, and all important gauges and street signs are clearly visible. 2. After adjusting the seat height, also adjust the seat's forward and backward position. 3. Push your hips as far back as possible, pressing against the gap between the seat cushion and the backrest. Below is additional information on cleaning car seats: 1. Purchase a bottle of velvet cleaner and use it with a brush and a high-powered vacuum cleaner. 2. While brushing the seat surface, use the vacuum cleaner to remove dirt. For larger stains or dirt, use a clean cloth dipped in a small amount of velvet cleaner. 3. Wipe the entire seat surface thoroughly, then use the vacuum cleaner to clean the seat.
7
5
Share

What is the structure of a car chassis?

Automobile chassis structure: It consists of four parts: the transmission system, the running system, the steering system, and the braking system. Most modern cars use an independent suspension system, which can be further divided into different structural forms such as transverse arm type, longitudinal arm type, multi-link type, candle type, and MacPherson suspension system. Extended information: The construction of a car: 1. Engine: The engine has 2 major mechanisms and 5 major systems. The crank-connecting rod mechanism and the valve mechanism; the fuel supply system, cooling system, lubricant system, ignition system, and starting system. 2. Chassis: The function of the chassis is to support and install the car engine and its various components and assemblies, forming the overall shape of the car, receiving the power from the engine to make the car move and ensuring normal driving. 3. Body: The body is installed on the frame of the chassis and is used for the driver, passengers, or loading goods. The body of a car or bus is generally a whole structure, while the body of a truck usually consists of a cab and a cargo compartment. 4. Electrical equipment: The electrical equipment consists of two major parts: the power source and the electrical equipment. The power source includes the battery and generator, and the electrical equipment includes the starting system of the engine, the ignition system of the gasoline engine, and other electrical devices.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.