Abnormal Noise When Turning on Air Conditioning in Wuling Hongguang?

How Far Can an Out-of-Town Vehicle with a Beijing Entry Permit Drive into the City?

With a Beijing entry permit, there are no driving restrictions, and you can drive into any ring road without limitations. Here are the specific details about the Beijing entry permit: 1. Introduction: The Beijing entry permit is a temporary pass for non-Beijing licensed vehicles to enter within the 6th Ring Road of Beijing and certain sections outside the 6th Ring Road. It is valid for 7 days, and you can apply for a 5-day extension at the local traffic police station one day before, on the day of, or one day after the expiration date. 2. Procedures: According to the policy, when applying for a Beijing entry permit, you need to provide a driver's license, vehicle registration, ID card, insurance policy, and a valid vehicle inspection sticker. However, in practice, only the driver's license, vehicle registration, and ID card are required. The driver's license and ID card must belong to the same person (who does not have to be the vehicle owner), and the ID card holder must apply in person.

2

5

Share

How many times can a bottle of tire repair fluid be used?

Tire repair fluid can only be used for minor leaks on tires without large gaps, meaning it's for emergency use only. One bottle can be used three to four times. Additional information: 1. Automatic tire repair fluid: With automatic tire repair fluid, there's no need for traditional tire repair—it can fix a puncture in just 3 seconds. Once added, it can be used long-term. If a tire is punctured while driving, the fluid automatically repairs it without needing to stop, completely changing the traditional manual tire repair method. 2. Advantages of tire repair fluid: It has strong repair capabilities, capable of sealing holes as small as micropores and as large as 6mm. It is suitable for all types of inflatable rubber tires, whether they have inner tubes or not. After being injected into the tire, it remains in liquid form for a long time, not freezing at -40°C and not decomposing at 100°C. It does not corrode tires or metal wheel rims and can prevent rust. The product itself is non-flammable, non-toxic, and non-polluting. It has enormous market potential.

10

5

Share

Is It Okay to Buy a Car That Has Been in the Showroom for a Month?

It is okay to buy a car that has been in the showroom for a month. Here are three key points to note when inspecting a new car: 1. Check the paint surface: Pay special attention to the uniformity and smoothness of the seams. It's best to compare with another car of the same model. The gaps between the doors, bumpers, and engine hood should be consistent. If the gaps are too large or differ in width from other cars, be cautious in your selection. 2. Inspect the tires: The tires of a new car should have no damage to the sidewalls, and the front tire sidewalls and treads should show no signs of punctures. Ideally, the tire hairs should still be intact, at least on the rear tires. If there are no traces of tire hairs on either the front or rear tires, but the odometer shows only a few kilometers, this is abnormal. 3. Check the nameplate: Each car's nameplate corresponds to a unique engine number and chassis number. Verify these numbers against the certification codes to ensure they match. Also, check the manufacturing date on the nameplate. The gap between the delivery date and the manufacturing date should not exceed three months.

10

2

Share

Why does the brake suddenly become very hard to press in winter?

In winter, the brake suddenly becomes very hard to press due to the ABS system using intermittent braking to prevent wheel lock-up or poor brake fluid flow. The specific reasons are as follows: 1. ABS system prevents wheel lock-up: Snow or ice often appears on the road in winter, reducing the friction between the wheels and the ground. Therefore, drivers are more likely to trigger the ABS anti-lock braking system when pressing the brake. When the ABS system is working, the vehicle's brake becomes hard to press, and there may also be a feeling of the brake pushing back. This situation is normal and not caused by a vehicle malfunction, so there is no need to worry too much. The ABS system uses intermittent braking to prevent wheel lock-up, significantly reducing the vehicle's braking distance. 2. Poor brake fluid flow: At low temperatures, the brake fluid flow becomes poor, which greatly increases the resistance of the brake fluid in the pipelines. As a result, the brake is much harder to press when starting a cold car. In this case, simply warm up the car for 10 minutes, and the brake will return to normal once the brake fluid reaches its working temperature.

2

1

Share

Is it serious if there is paint on the tire?

Tires should not be painted or come into contact with oil, as this can lead to corrosion, hardening, aging, and cracking of the tire. Below is relevant information about tires: 1. Introduction: Tires are round, elastic rubber products mounted on various vehicles or machinery to roll on the ground. In 1845, Robert William Thomson, a civil engineer from Scotland, invented the pneumatic tire and obtained a patent from the British government under the title 'Improvement in Carriage Wheels and Other Vehicles.' On December 10 of the same year, the first pneumatic tire was born. Tires are usually mounted on metal rims, supporting the vehicle body, cushioning external impacts, ensuring contact with the road surface, and maintaining the vehicle's driving performance. 2. Function: Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing capacity, traction performance, and cushioning performance. Additionally, they require high wear resistance and flex resistance, as well as low rolling resistance and heat generation. Half of the world's rubber consumption is used for tire production, highlighting the significant demand for rubber in tire manufacturing.

17

2

Share

Definition Standards for Major Accidents in Used Cars

Definition standards for major accidents in used cars include vehicles with welding, cutting, reshaping, or deformation on the longitudinal beams; vehicles with welding, cutting, reshaping, or deformation on the A, B, or C pillars; vehicles with severe welding, cutting, reshaping, or deformation on other non-removable parts; and vehicles whose airbags have deployed due to impact. Below is relevant information about used cars: 1. Introduction: Used cars refer to motor vehicles that have been registered with the public security traffic management authorities, have not yet reached the national scrapping standards, or are within their economically practical lifespan and can still be used. 2. Legal Basis: The "Used Car Circulation Management Law," jointly issued by the Ministry of Commerce, the Ministry of Public Security, the State Administration for Industry and Commerce, and the State Administration of Taxation, has been officially implemented. Article 2 of the general provisions of this law defines used cars as vehicles that have completed registration procedures and are traded and transferred ownership before reaching the national scrapping standards, including three-wheeled vehicles, low-speed trucks (originally agricultural vehicles), trailers, and motorcycles.

20

1

Share

Abnormal Noise When Turning on Air Conditioning in Wuling Hongguang?

How Far Can an Out-of-Town Vehicle with a Beijing Entry Permit Drive into the City?

How many times can a bottle of tire repair fluid be used?

Is It Okay to Buy a Car That Has Been in the Showroom for a Month?

Why does the brake suddenly become very hard to press in winter?

Is it serious if there is paint on the tire?

Definition Standards for Major Accidents in Used Cars

How Many Seats Can a B License Drive?

Does a successful second-hand car transfer indicate the vehicle has no issues?

What is the reason for abnormal noise when turning the steering wheel to the right but not to the left?

Should the Handbrake Be Applied When Shifting to Neutral at a Red Light?