Abnormal Noise When Shifting Gears in Automatic Transmission?

1 Answers
LeElijah
07/29/25 4:08pm
Automatic transmission produces abnormal noise during gear shifting for the following reasons: 1. The release bearing lacks lubricant, resulting in dry grinding or bearing damage. 2. There is no gap between the inner end of the release bearing and the release lever. 3. The bushing and guide tube of the release bearing are contaminated with oil and dirt, or the return springs of the release bearing and pedal are fatigued, broken, or detached, leading to poor return of the release bearing. Solution for abnormal noise during gear shifting in automatic transmission: The issue of abnormal noise during gear shifting in automatic transmission is relatively complex, and it is recommended to visit a repair shop for a comprehensive inspection.
Was this review help?
13
2
Share
More Forum Discussions

How Long After Car Paint Repair Can You Wash the Car?

After car paint repair, it is recommended to wait 48 hours before washing the car. Technical requirements for car paint repair: 1. The air entering the spray booth must be strictly filtered to ensure it is free of dust; 2. The airflow direction in the spray booth must follow gravity from the ceiling to the floor, and the air must be exhausted from the floor and filtered into clean air; 3. Ensure the air in the spray booth is completely exchanged twice per minute. Excessive air velocity may lead to excessive paint loss and poor coating quality, while insufficient air velocity may affect the normal evaporation of solvents; 4. Provide good lighting conditions; 5. Ensure there is no negative pressure in the spray booth; 6. The operational noise in the spray booth must not exceed 85 dB; 7. Comply with fire safety requirements.
19
2
Share

What are the new regulations for license plate registration in Henan?

There are no new regulations for license plate registration in Henan. Below are the specific details regarding motor vehicle license plate registration: 1. Temporary license plates: Newly purchased motor vehicles must display temporary license plates to be legally driven on the road. Temporary license plates for new vehicles cannot be used for more than 30 days, and the owner should promptly apply to the vehicle management authority for official license plates. After expiration, penalties may include temporary vehicle seizure and a deduction of 12 points. 2. Overview: Vehicle license plates, as stipulated by national vehicle management regulations, have a unified format and style. They are hard number plates with registration codes issued by the vehicle management authority after reviewing, inspecting, and registering vehicles that have applied for license plates.
7
5
Share

What does the inspection validity period until April 2021 mean?

Inspection validity period until April 2021 refers to the vehicle's annual inspection being valid until the end of April 2021. Below are relevant details: 1. According to the "Motor Vehicle Registration Regulations": Article 49 states that the motor vehicle owner may apply for an inspection compliance mark at the vehicle management office of the registration location within three months before the expiration of the motor vehicle inspection validity period. 2. Conditions required for application: Before applying, the motor vehicle owner must resolve all road traffic safety violations and accidents related to the vehicle. When applying, the motor vehicle owner must fill out an application form and submit the vehicle license, compulsory motor vehicle traffic accident liability insurance certificate, vehicle and vessel tax payment or tax exemption certificate, and motor vehicle safety technical inspection compliance certificate.
2
3
Share

What to do if there are scratches on the brake disc?

As long as the scratch depth does not exceed 0.6 millimeters, it's not a big issue. The causes of deep scratches include: 1. Driving habits: Only the front or rear brake discs have grooves. This situation is generally caused by driving habits and frequently uneven distribution of braking force between the front and rear. 2. External force: Only one brake disc has grooves while others are normal, usually due to material issues or external forces causing this. 3. Possible factors: Foreign objects getting stuck between the brake disc and brake pad, coinciding with heavy braking; uneven force distribution of the brake caliper; manufacturing defects in the brake pads, resulting in uneven mixed materials, making the brake pads too hard or containing large metal particles.
14
3
Share

Does 0.5 cm above the oil level limit have any impact?

Being 0.5 cm above the oil level limit has no impact. The normal range for engine oil is between the two marks on the dipstick. Engine oil, also known as motor lubricant, consists of base oil and additives. It serves multiple functions such as lubrication, reducing friction, aiding in cooling, sealing against leaks, preventing rust and corrosion, and acting as a shock absorber. It is often referred to as the 'lifeblood' of a car. Engine oil is composed of base oil and additives. Base oils are categorized by quality into Group I, Group II, and Group III base oils, with Group I and II being mineral oils and Group III being synthetic base oils. There are various types of additives, and the quantity and quality of these additives directly influence the API quality rating of the lubricant.
5
5
Share

How to Turn Off the Auto Start-Stop Function in an Automatic Transmission Car?

To turn off the auto start-stop function in an automatic transmission car, simply press the start-stop button located below the center console, which is marked with a capital letter A surrounded by arrows. The start-stop function, also known as the engine auto start-stop system, automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts it when it's time to move forward again. An automatic transmission means the driver does not need to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. There are six gear positions in total, arranged from top to bottom as follows: P, R, N, D, S, L.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.