A6 Cylinder Bank 2 Mixture Adjustment Additive Mode?

What needs to be replaced during annual car maintenance?

During annual car maintenance, engine oil and oil filters generally need to be replaced; the most frequent car maintenance task is washing the car; the most important areas to regularly inspect are tire surfaces and pressure, oil level, coolant level, and brake fluid level. Regular car maintenance typically involves replacing: 1. Engine oil and oil filter: Engine oil and oil filters basically need to be replaced during every maintenance service. Car engine oil is generally divided into three types: mineral oil, semi-synthetic oil, and fully synthetic oil, each with different replacement cycles. 2. Coolant: Car coolant not only provides antifreeze protection but also helps cool the engine during operation by dissipating high temperatures. In winter when temperatures are low, coolant prevents low-temperature damage to the engine. Generally, coolant needs to be replaced every three years or 50,000 kilometers. 3. Windshield washer fluid: Windshield washer fluid is mainly used to clean dirt from the windshield and needs to be replenished when empty. During winter use, it is recommended to add antifreeze windshield washer fluid to prevent freezing and damage to the washer fluid reservoir, which could affect normal usage. 4. Cabin air filter: The cabin air filter helps purify incoming air, ensuring clean airflow from the air conditioning system. Generally, it needs to be replaced every 1 to 2 years. 5. Brake fluid: Brake fluid has different characteristics compared to other fluids. It is hygroscopic, meaning it easily absorbs moisture during use. When brake fluid absorbs water, it can form bubbles, leading to softer brakes and longer stopping distances. It is recommended to replace brake fluid every 2 years to prevent braking abnormalities and ensure driving safety.

9

3

Share

Is the Lynk & Co 03 a four-wheel drive?

The Lynk & Co 03 is a four-wheel drive vehicle. More details about this model are as follows: 1. Rear Design: The "L"-shaped taillights and dual round exhaust pipes are similar to those of the concept car, giving it high recognition. 2. Platform: The Lynk & Co 03 will be built on the CMA platform jointly developed by Geely and Volvo, making it the first sedan model under the Lynk & Co brand. 3. Powertrain: The Lynk & Co 03 is expected to offer a choice between a 1.5T three-cylinder and a 2.0T four-cylinder engine. The 1.5T direct-injection engine paired with a 7-speed dual-clutch transmission delivers a maximum power of 132kW (179Ps) and a peak torque of 265N·m, matched with a 7-speed dual-clutch transmission.

15

3

Share

What is the normal temperature for a vehicle's water temperature?

The water temperature gauge ranges from 0-130°C, with the normal temperature being 90°C in the middle. When the water temperature stabilizes at 90°C, it indicates that the engine's temperature has stabilized and reached its optimal working condition. Here is some additional information: 1. Water temperature refers to the coolant temperature: Water temperature actually refers to the temperature of the coolant. Inside the engine, apart from oil passages, there are also coolant passages. The full name of the coolant is antifreeze coolant, and its most important function is to cool and lower the engine's temperature while preventing freezing in winter. Additionally, coolant usually also has anti-rust and anti-corrosion properties. In the cooling system, there are both metal and non-metal materials, and the anti-rust and anti-corrosion properties of the coolant help slow down the aging of the entire cooling system. 2. When the water temperature is too high: During daily driving, situations where the water temperature is too high can occur. Many experienced drivers immediately turn off the engine when they notice the water temperature is too high, which is incorrect. This is because the water cooling system requires the engine to be running to function. Once the engine is turned off, the water pump loses power, and the coolant can no longer circulate. Meanwhile, the engine components are still in a high-temperature environment, which not only fails to cool them down but may also damage engine parts. The correct approach is to let the engine idle for a few minutes, adjust the air conditioning to the warm air setting, turn the fan to maximum, and open the hood to help dissipate heat. Only after the water temperature has dropped should the engine be turned off.

6

2

Share

Is it harmful to mix 92 and 95 gasoline in a car?

Mixing 95 and 92 gasoline is harmful to the car. Occasionally using the wrong gasoline grade only requires switching back to the correct grade after use, but long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-grade gasoline, accidentally using higher-grade gasoline will not cause damage, but the increase in octane number will change the fuel's ignition point, leading to delayed combustion in the engine. This means the engine's power output and thermal efficiency will decrease, resulting in poorer performance. For vehicles recommended to use higher-grade gasoline, using lower-grade gasoline can cause engine knocking. Because the octane number is too low, the gasoline's ignition point decreases, causing it to ignite prematurely during the compression stroke. If the gasoline ignites before the spark plug fires during the compression stroke, resistance will occur during the upward stroke. This resistance makes the engine run very unstable. If the knocking is mild, it only increases noise and does not significantly damage the engine. However, if the knocking is severe, it indicates the engine's condition is very serious. The vibration not only affects driving stability but also causes abnormal wear on the pistons and cylinders, and in severe cases, can lead to cylinder scoring. In addition to checking the appropriate gasoline grade in the car's manual, you can also find it on the fuel tank cap. Usually, the gasoline grade can also be determined based on the engine's compression ratio. Cars with an engine compression ratio between 8.6-9.9 should use 92 gasoline, those between 10.0-11.5 should use 95 gasoline, and those with higher compression ratios should use 98 gasoline. However, with the use of new technologies, the compression ratio alone cannot determine the gasoline grade. Engines with high compression ratios can also be tuned to use lower-grade gasoline. Besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92 gasoline contains 92% isooctane and 8% n-heptane, while 95 gasoline contains 95% isooctane and 5% n-heptane.

2

Share

Is it better to maintain your car at a 4S shop or outside?

For maintenance and repairs, it is advisable to choose a 4S shop as it offers better after-sales service. For vehicles out of warranty, maintenance and repairs can be done outside at a lower cost. However, it is recommended to replace transmission oil, differential oil, and fuel filters at a 4S shop for better assurance. Advantages and disadvantages of 4S shops and repair shops: 1. 4S shops: They are more professional and can comprehensively address issues, but they may suggest replacing entire parts for minor problems. 2. Repair shops: They are cheaper and have more experience with minor issues. They often specialize in certain car models, ensuring a certain level of professionalism and offering relatively official solutions. However, their skill levels vary, and they may lack the expertise for certain cars and necessary professional equipment, resulting in poor after-sales service.

15

5

Share

How to flash the engine ECU?

Flashing the engine ECU can be done in the following ways: 1. Write-in modification: This method retains the original ECU hardware and loads new data into the factory ECU. Write-in ECUs, also known as rewritten ECUs, are somewhat similar to flashing a mobile phone. The operation is simple and only requires a computer to complete, making it a relatively common method for flashing ECUs. 2. Replacement modification: This involves directly replacing the factory ECU with a full-time replacement ECU. This type of modification is usually seen in racing scenarios and is not popular in the market. Composition of the ECU: The ECU is a component composed of input/output interfaces, a microprocessor, analog-to-digital converters, and memory units, used to manage the vehicle's operation. The memory unit, in particular, acts like the human brain, recording many of the vehicle's data files.

17

2

Share

A6 Cylinder Bank 2 Mixture Adjustment Additive Mode?

What needs to be replaced during annual car maintenance?

Is the Lynk & Co 03 a four-wheel drive?

What is the normal temperature for a vehicle's water temperature?

Is it harmful to mix 92 and 95 gasoline in a car?

Is it better to maintain your car at a 4S shop or outside?

How to flash the engine ECU?

How to Charge a Dead Battery?

What engine and transmission are used in the Geely Boyue?

Is the BMW M3 a Sports Car?

What to Do When Your Parked Car Gets Scratched on the Roadside?