···
Log in / Register

a and m auto sales colorado springs cars

2 Answers
MakaylaLee
12/23/25 5:30am

A and M Auto Sales in Colorado Springs is a local used car dealership that focuses on providing affordable, pre-owned vehicles to the Colorado Springs community. The core of their business is offering a selection of budget-friendly cars, trucks, and SUVs, often with financing options aimed at buyers who may have challenges with traditional credit. Based on customer reviews and industry patterns for similar dealerships, they appear to be a practical option for those seeking basic transportation without a large upfront investment, though a thorough independent inspection of any vehicle is highly recommended before purchase.

When considering a purchase from A and M Auto Sales, it's important to understand their typical business model. They often specialize in high-mileage vehicles or older models that are priced to sell quickly. The primary advantage is accessibility; they may work with in-house financing or partner with lenders who specialize in subprime auto loans, making car ownership possible for a wider range of people. However, this can sometimes come with higher interest rates, so understanding the full loan terms is critical.

A key step for any buyer is to review the vehicle's history. Always ask for the VIN (Vehicle Identification Number) to run a report through services like Carfax or AutoCheck. This report can reveal past accidents, title issues (like salvage or rebuilt status), and service records. Given Colorado's climate, also pay close attention to rust prevention and undercarriage condition, as road salt in winter can cause significant corrosion over time.

The table below outlines typical data points you might encounter when evaluating a vehicle from a local buy-here-pay-here lot like A and M Auto Sales.

Vehicle AspectTypical Range/Considerations
Model Year2008 - 2016
Mileage90,000 - 150,000+ miles
Price Range$5,000 - $15,000
Down PaymentOften required, typically $500 - $1,500
Financing APRCan vary widely, often higher than bank rates
Vehicle TypesSedans, SUVs, Pickup Trucks
History ReportShould be provided or available upon request

Finally, always insist on taking the car for an independent pre-purchase inspection (PPI) by a trusted third-party mechanic. This small investment can reveal potential mechanical issues that aren't apparent during a test drive. Check their reputation on platforms like Google Reviews and the Better Business Bureau to gauge other customers' experiences with their sales and service process.

Was this review help?
11
4
Share
McNatalie
12/30/25 9:40pm

My buddy got a truck from them last year. It was an older Ford with some miles on it, but it was what he could afford. The process was pretty straightforward—they worked with him on the down payment. His main advice? Don't skip the mechanic check. He paid a local guy a hundred bucks to look it over, which gave him peace of mind. It’s been running fine for his commute to the Springs. Just go in with realistic expectations.

Was this review help?
4
0
Share
Expand All
More Forum Discussions

What is the working principle of the ABS system?

ABS system, also known as the Anti-lock Braking System, works as follows: During braking, the ABS system, based on speed signals from each wheel speed sensor, closes the normally open input solenoid valve for the wheel that is starting to lock up, maintaining the braking force. If the wheel continues to lock, the normally closed output solenoid valve is opened. This keeps the braking state at the optimal point, ensuring the best braking performance and the highest level of driving safety. ABS, short for Anti-lock Braking System, functions to automatically control the braking force during vehicle braking, preventing the wheels from locking up and keeping them in a state of rolling and sliding (with a slip ratio of about 20%). This ensures maximum traction between the wheels and the road surface. The ABS system mainly consists of four components: wheel speed sensors, the electronic control unit (ECU), the hydraulic unit, and the ABS warning light. The wheel speed sensors detect the motion state of the wheels and generate sinusoidal electronic pulse AC signals. These signals are then processed by a modulator, converted into digital signals, and transmitted to the electronic control unit. The electronic central control unit (ECU) receives input signals from the wheel speed sensors and uses these parameters to calculate the wheel speed, vehicle speed, and slip ratio. Based on the slip ratio, it determines the state of the wheels and issues control commands to the hydraulic unit. The hydraulic unit adjusts the pressure in the brake lines according to the control commands. The adjustment process includes maintaining pressure, increasing pressure, and decreasing pressure. The ABS warning light alerts the driver to any system faults. If the ABS warning light is illuminated, it is recommended not to continue driving. This is because the ABS light indicates a fault in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, making it difficult for the driver to slow down or adjust the vehicle's trajectory, posing significant safety risks.
13
0
Share

How to Properly Warm Up an Automatic Transmission Car?

First, it is necessary to get the engine running. Run the engine for thirty seconds to 1 minute before driving. When starting off, drive at low speed for a while to allow the system to reach normal operating temperature before driving at high speed. After the engine temperature rises to the normal level (approximately 3 to 5 minutes), you can resume normal driving. The purpose of warming up the car is to bring the engine temperature to around 90 degrees, so that the relative temperature inside and outside the entire engine can approach the ideal state.
20
2
Share

How to Check the Car's Dash Cam?

To check the dash cam, the owner should first start the vehicle and turn on the dash cam. The dash cam has an SD card. To view the recordings, remove the SD card and insert it into a card reader. Before watching, pause the recording by pressing the MODE button to access the saved video information. After starting the vehicle, the screen will light up. Locate the switch button in the settings and click the switch button on the car display. The dash cam has a USB port, so you can directly connect it to a computer using a data cable to view the recordings. A dash cam is a device that records images and sound information during vehicle travel, capturing the entire process of driving in video and audio.
17
0
Share

How to Unfasten the Middle Seat Belt in Haval M6?

The seat belt is inside the vehicle. If the owner wants to unfasten the seat belt, they must open the car door and enter the vehicle. You can use a key or a flathead screwdriver-like hard object to insert into the small hole in the middle of the seat belt buckle to unfasten it. Pinch the button with both hands and pull it outward (horizontally relative to the car body). The button cover will come off outward; then, move the button up and down. After adjusting the position to the desired level, stop pulling the button. Fine-tune the height up and down. When you hear a click, it means the height adjustment is properly set. Car seat belts are devices in vehicles designed to reduce passenger injuries when the car body is subjected to a violent impact, ensuring the safety of both passengers and the driver.
19
1
Share

How to Set BMW Display Key to Chinese Language?

Locate the BMW Smart Display Key, which can display various vehicle status information. Bring the Smart Display Key close to your BMW vehicle. Find and press the unlock button. Locate the lock button and press it, and you will notice that the BMW Display Key has switched to Chinese language. The 2.2-inch LCD Smart Display Key can display vehicle status, available fuel/electric range, and other information. When equipped with the Display Key, it may include Comfort Access features such as automatic unlocking when approaching the vehicle, starting the engine, etc.
14
1
Share

How to Use Reference Points for Steering in Subject 2 Right-Angle Turn?

Before entering the right-angle turn section, it's crucial to align the vehicle straight and maintain a distance of about 30 centimeters from the right-side boundary line while driving. If positioned too close to the left side, you're likely to fail. During the test, simply keep the steering wheel's center aligned with the road's centerline and proceed forward. When the interior door handle aligns with the boundary line of the right-angle turn, quickly turn the steering wheel fully to the left. Monitor the left rearview mirror closely; as long as the wheels don't touch the corner, you should pass smoothly.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.