2021 New Sagitar Break-in Period Manual?

1 Answers
ElliottDella
07/29/25 8:56pm
2021 New Sagitar Break-in Period Manual Notes: 1. Avoid high-speed and long-distance driving: Try to avoid high-speed driving, long-distance driving, and fully loaded driving. Before driving, allow the engine to warm up sufficiently so that the internal moving parts can be properly lubricated. 2. Control vehicle speed and engine RPM: During the break-in period, try not to exceed 90 km/h and keep the engine RPM below 3000 rpm to avoid excessive load on the engine and transmission components. Avoid prolonged low-speed driving and shift gears appropriately during driving to ensure the transmission is properly broken in. 3. Avoid sudden acceleration and braking: These actions can cause significant impact on the engine, transmission, braking system, chassis, and suspension. Maintain a steady speed while driving and apply gradual acceleration and braking.
Was this review help?
2
0
Share
More Forum Discussions

How to Remove the Rear Seat Cushion of a Sedan?

Methods for removing the rear seat cushion of a sedan: 1. Move the front seats forward; 2. Open the clips securing the headrest cover and remove both the headrest and its cover; 3. Locate the clips and hooks in the gap (between the backrest and the seat cushion) and remove them from the gap; 4. At this point, you can directly take out the seat cushion and backrest cover; 5. Reinstall the headrest. Installation method for the rear seat cushion: 1. Remove the rear seat headrest, place the backrest cover over the backrest, secure the top of the seat cover with hooks, and fix the bottom by inserting the seat cushion clips into the gap between the backrest and the seat cushion; 2. Place the seat cushion cover over the rear seat cushion and secure it again by inserting the seat cushion clips into the gap between the backrest and the seat cushion; 3. Reinstall the rear seat headrest, fit the rear seat headrest cover properly, and secure it with clips.
18
5
Share

What are the consequences of driving a B2 vehicle with a C1 license?

12 points will be deducted and a fine will be imposed. Driving a vehicle that requires a B2 license (large truck license) with a C1 license constitutes operating a motor vehicle that does not match the permitted vehicle type, and is considered driving a large truck without the proper license. According to Article 1 of the 'Scoring Standards for Road Traffic Safety Violations', if a motor vehicle driver commits any of the following violations, 12 points will be deducted at once: (1) Driving a motor vehicle that does not match the permitted vehicle type: According to the 'Road Traffic Safety Law of the People's Republic of China', the traffic management department of the public security authority will impose a fine. (2) Driving a motor vehicle without obtaining a motor vehicle license, or during the period when the motor vehicle license is revoked or temporarily suspended: If the driver commits any of the violations listed in the second or fourth items of the preceding paragraph, the motor vehicle license may also be revoked; if the driver commits any of the violations listed in the first, third, or fifth to eighth items, they may also be detained for up to 15 days.
20
3
Share

Do I Need to Register for Changing Rims?

If you change the rims but keep the size the same as the original ones, you don't need to register the modification. However, if you alter the size, registration is required. If you change the rim size without registering at the vehicle management office, your vehicle will fail the annual inspection, and it is considered illegal. If caught by traffic police, you will be ordered to revert the changes and may face fines and penalty points. Here is some related information about car modifications: 1. Relevant Regulations: According to the motor vehicle registration regulations, any changes to the body color, model, performance, purpose, or structure of a licensed vehicle, including replacing the frame, body, or engine, must be reported to the vehicle management office for modification registration. 2. Benefits of Modifying Rims: Upgrading to a good set of rims can improve heat dissipation and achieve lightweight goals. They provide high visual impact, both statically and dynamically, and enhance the vehicle's handling performance. Increasing the rim diameter, width, and lowering the profile can collectively improve tire grip.
16
5
Share

Is the CVT transmission of the Nissan Murano durable?

The CVT transmission of the Nissan Murano is durable. The Murano is equipped with Nissan's latest generation XTRONIC-CVT continuously variable transmission, featuring a simulated 6-speed manual mode. Below are more details about the Nissan Murano: 1. Body Dimensions: The Nissan Murano is Nissan's first large crossover SUV, with a length of 4860mm, width of 1885mm, height of 1730mm, and a wheelbase of 2825mm. 2. Powertrain: The Nissan Murano is powered by a 3.5L-CVT engine, paired with a 6-speed manual/automatic transmission, and features front-engine, four-wheel drive. 3. Vehicle Features: It comes equipped with high-end amenities typically found in luxury vehicles, including automatic climate control, automatic-adjusting wipers, power front and rear windows, ambient interior lighting, headlight washers, an 8-speaker audio system, a color central control screen, and an iPod interface.
6
0
Share

What is the fuel consumption of the Hyundai ix35 2.0 automatic transmission?

The average fuel consumption of the Hyundai ix35 2.0 automatic transmission is 8.55 liters per 100 kilometers. Here is more information about the Hyundai ix35: 1. Body dimensions: The Hyundai ix35 is a compact SUV under the Hyundai brand. The car's length, width, and height are 4435 mm, 1850 mm, and 1680 mm respectively, with a wheelbase of 2640 mm. 2. Powertrain: The ix35 offers two engine options: a 2.0-liter and a 2.4-liter. Both engines are the new Theta II generation dual CVVT all-aluminum four-cylinder gasoline engines. The 2.0-liter engine has a maximum output power of 120kW (163 horsepower)/6200rpm and a maximum torque of 194 Nm/4600rpm. The 2.4L engine has a maximum output power of 128kW (174 horsepower)/6000rpm and a maximum torque of 226 Nm/4000rpm.
16
5
Share

What Are the Differences Between 1.4T and 1.6L Engines in Cars?

The differences between 1.4T and 1.6L engines in cars are as follows: 1. Displacement: The 1.4T engine has a smaller displacement than the 1.6L engine. 2. Engine Type: The 1.4T uses a turbocharged engine, while the 1.6L is naturally aspirated. 3. Quality: Vehicles with 1.4T engines generally offer better performance, but those with 1.6L engines have lower maintenance costs and relatively better reliability. The meaning of 'Golden Displacement' can be interpreted from three aspects: 1. Fuel efficiency; 2. Good handling, power, and comfort; 3. Ability to meet various consumer needs: Such as business, commuting, travel, etc. In other words, it refers to vehicles that can maximally satisfy various consumer demands at a reasonable price, hence the term 'golden displacement' and 'golden models'.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.