12123 Motor Vehicle Transfer Process?

Why can't you drive straight in a lane with sawtooth markings?

Lanes with sawtooth markings can be used for driving straight, but you must follow the time regulations indicated on the signs. During specified times, you can only turn and not drive straight. Below is a detailed introduction to lanes with sawtooth markings: Traffic rules for lanes with sawtooth markings: Lanes with sawtooth markings are also known as variable lanes, which change direction based on traffic flow. The direction changes according to the traffic lights: if the light shows straight, you drive straight; if it shows left, you turn left; if it shows right, you turn right. This setup helps alleviate traffic congestion promptly, allowing vehicles to pass quickly and keeping the roads clear. Penalties for violations: Violating the traffic rules of variable lanes will result in a three-point deduction on your license and a fine.

20

1

Share

Is 84 Disinfectant Corrosive to Tires?

Yes, the main component of 84 disinfectant is calcium hydroxide, which is slightly acidic, so it has certain corrosive effects on tires. If sprayed on tires, it may not cause significant damage to the rubber, but it will certainly harm metal components. Generally, in the absence of pathogenic contamination, disinfection is unnecessary. If tire disinfection is required, residual disinfectant should be rinsed off with clean water 30 minutes after spraying. The main component of tires is rubber, which accelerates aging when exposed to strong oxidizers like potassium permanganate. Physical methods such as high-temperature steam disinfection also accelerate the oxidation of rubber products like tires, reducing their performance and lifespan. 84 disinfectant is typically not used inside vehicles. Solutions like sodium hypochlorite and 84 disinfectant are mainly used for disinfecting floors, walls, doors, and windows in hospitals and public places, as they are highly corrosive. If you have a car at home, you can use a 0.5% sodium hypochlorite solution to spray the exterior and interior spaces for disinfection. As long as it is diluted to the standard ratio, the corrosive effect on tires is minimal, and the impact on the car's paint will also be minor. However, it may corrode chrome trim, causing white spots. Therefore, if 84 disinfectant is sprayed on tires, the car body should be washed after some time to prevent corrosion of other components. 84 Disinfectant Composition: 84 disinfectant is a chlorine-based disinfectant primarily composed of sodium hypochlorite, mainly used for disinfecting surfaces and environments. Sodium hypochlorite has strong oxidizing properties and hydrolyzes to form hypochlorous acid, which can oxidize reducing substances and has bleaching effects. 84 Disinfectant Effects: 84 disinfectant has a certain corrosive effect on aluminum, copper, carbon steel, etc. If not sufficiently diluted, it can be somewhat corrosive to tires, though not extremely so.

20

3

Share

What Material Are Axles Made Of?

Axles are generally made of the following materials: 1. Carbon Steel: High-quality carbon structural steels such as 35, 45, and 50 are widely used due to their excellent comprehensive mechanical properties, with 45 steel being the most commonly employed. To enhance their mechanical properties, normalizing or quenching and tempering treatments are applied. For less critical or lightly stressed axles, carbon structural steels like Q235 and Q275 may be used. 2. Alloy Steel: Alloy steels offer superior mechanical properties but are more expensive, making them suitable for axles with special requirements. For example, high-speed axles using sliding bearings often employ low-carbon alloy structural steels like 20Cr or 20CrMnTi, which improve journal wear resistance after carburizing and quenching. Rotor shafts operating under high temperature, high speed, and heavy load conditions require excellent high-temperature mechanical properties, typically using alloy structural steels such as 40CrNi or 38CrMoAlA.

4

Share

Will repainting a new car qualify for refund plus triple compensation?

Repainting a new car usually does not qualify for refund plus triple compensation, unless the dealer has engaged in particularly severe fraudulent practices. Below are detailed explanations: Stringent conditions for refund plus triple compensation: The conditions for refund plus triple compensation are quite stringent. There must be evidence proving that the dealer committed serious fraud. Consumers must retain all relevant evidence to have a chance of resolving the issue through litigation. In most cases, such disputes are settled through negotiation. Methods to determine if repainting has occurred: Areas of a vehicle prone to repainting are typically the front and rear bumpers, side mirrors, and other protruding parts. During vehicle inspection, special attention should be paid to these areas. You can change your viewing angle to check for distortions in the paint surface or use your hand to feel for minor height differences between repainted areas and their surroundings, as repainted sections often exhibit slight unevenness compared to adjacent original paint.

19

4

Share

What is the difference between 18-inch and 19-inch tires?

The most obvious difference between 18-inch and 19-inch wheels is their size. The 18/19-inch refers to the diameter of the wheel rim, with the 18-inch wheel being smaller than the 19-inch one. Below is additional information: 1. Introduction: The wheel hub is the central part of the wheel, mounted on the axle to support the tire. It is cylindrical in shape and usually fitted with bearings to reduce friction. The most common types of wheel hubs are steel rims and aluminum alloy rims. 2. Steel wheels: The main advantages of steel wheels are their simple manufacturing process, relatively low cost, and strong resistance to metal fatigue, commonly known as being cheap and durable. 3. Aluminum alloy wheels: Aluminum alloy wheels are lighter in weight, have lower inertial resistance, and higher manufacturing precision. They deform less during high-speed rotation, which helps improve the car's straight-line driving performance, reduces tire rolling resistance, and thereby decreases fuel consumption.

13

4

Share

What Are the Clever Tricks for Dealing with Car Headlight Scratches?

Here are the methods to deal with car headlight scratches: 1. Polishing Removal: Small and shallow scratches can be removed by polishing. However, it's best if the scratches are not in the driver's line of sight, as polishing causes some glass loss, and large areas may affect visibility. For safety reasons, it is recommended to replace the headlight directly. 2. Glass Scratch Repair Agent: Slowly apply the gel along the scratch, being patient to avoid unevenness, which is especially noticeable in sunlight. However, glass repair agents are only suitable for minor scratches. For more severe cases, it's advisable to visit a professional auto beauty shop or 4S store. 3. Professional Repair Shop: For deep scratches, it is recommended to take the car to a professional repair shop. 4. Toothpaste Removal: Apply a small amount of toothpaste to the scratch, gently rub with a soft cloth, and then rinse with water. Toothpaste can help repair minor scratches and also prevent rusting.

9

0

Share

12123 Motor Vehicle Transfer Process?

Why can't you drive straight in a lane with sawtooth markings?

Is 84 Disinfectant Corrosive to Tires?

What Material Are Axles Made Of?

Will repainting a new car qualify for refund plus triple compensation?

What is the difference between 18-inch and 19-inch tires?

What Are the Clever Tricks for Dealing with Car Headlight Scratches?

Are 7-seater SUVs in 2021 eligible for 6-year exemption from inspection?

How many SUV models does Porsche have?

What are the license plate registration requirements for new energy vehicles in Shenzhen?

How to Repair Minor Scratches on a Car?