Categorías
···
Entrar / Registro

Project Engineer (El Paso, TX)

$40,000-45,600/año

2016 N St Vrain St, El Paso, TX 79902, USA

Favoritos
Compartir

Parte del contenido se ha traducido automáticamenteVer original
Descripción

JOB SUMMARY: To provide Document Administration for all phases of the construction project(s) including Subcontracts, Change Orders, RFIs, ASIs, Submittals, Meeting Minutes, As-Built Drawings, Closeout Documentation and to provide administrative support to the Project Management Team. PROJECT ENGINEER DUTIES: CULTURE AND POLICY: • Our Employee Handbook: Our PE is an important member of the company. Staff at all levels view Pes with high regard. A PE shall be familiar with employee policy, operate in compliance with the policy, reinforce the policy with team members, and lead by example. • The company Safety Manual: PE is responsible for complying with and promoting safety on the jobsite. • If we’re not having Fun, were done: The company’s culture embraces the notion that we all perform better when we are enjoying our work, overcoming challenges, learning, achieving, and yes, winning. As PE you are to promote this positive fun company culture. Winning needs to be shared. Lessons learned, humbly and invitingly shared as well. This company is full of geeky construction folks, who take themselves very seriously, and have high expectations for themselves and those they work with, all contributing to the level of pride that binds us as a team. Keep the fun. • Marketing: The PE has an impact on whether the company has the opportunity of repeat business and is often conversing with contacts that could present new opportunities. PE is to conduct all communications and presentations in a professional manner. PE shall remain knowledgeable of all company engagements. The PE shall provide urgent response to any company marketing or estimating request pursuing RFI/RFQ/RFP/Interviews, to include keeping your personal resume current and immediate participation in brainstorming, content contribution, and subsequent review of RFP written and graphic (draft) content, once requested. SUBCONTRACT ADMINISTRATION: • Subcontracts: The PE is responsible for drafting the scope of work for each subcontractor for Project Manager approval. The PE is responsible for tracking the execution of Subcontracts and where necessary putting together Addendums for the Subcontracts. • Subcontractor Change Orders: The PE is responsible to assist the Project Manager in gathering pricing, assembling, logging, distribution, and tracking subcontract change orders. OWNER CONTRACT ADMINISTRATION: • Prime Contract: The PE is responsible to review and understand the company’s Contractual obligations to the Owner. • Owner Proposals and Change Orders: PE is to assist the Project Manager with the creation, tracking, and logging of Owner Proposals and Change Orders. • As-Built Drawings: The PE is responsible for updating the plans with changes as they occur throughout the project. This is done through Procore. The PE is to ensure that the As-Built Drawings are up to date on all RFIs, ASIs and Approved Proposal Requests. • Accident Reports and OSHA Reports: The PE is responsible for logging accident reports and OSHA Reports in Procore. • Turnover Documentation: PE is responsible to collect and monitor turnover documentation (Certificates of Substantial Completion and Certificates of Occupancy). CLOSEOUT DOCUMENTATION: • Closeout Checklist: The PE is responsible to create and keep an updated closeout checklist from the beginning of the job through completion. The closeout checklist tracks all closeout items required at the end of the job and when they are received. • The PE is responsible to gather all closeout documentation for the project and ensure that it is delivered to the Architect in the proper format. SCHEDULING AND PROACTIVE PLANNING: • Submittals: PE is responsible to coordinate with the Project Manager and Superintendent to schedule submittals according to order of production and lead times. Submittal Scheduling and Coordination is a crucial aspect to this job. • Scheduling: The PE may be asked to assist in inputting the schedule in Microsoft Projects under the direction of the Project Manager. The PE should be familiar with Microsoft Projects. CONFLICT RESOLUTION/PROBLEM SOLVING: • Conflict Resolution/Problem Solving – The PE is a problem solver focused upon resolving disputes or non- compliance issues that disrupts the production of the project within job description. • The PE is to report all site conflicts to the Superintendent. MEETINGS and COMMUNICATIONS: • Pre-Construction Meetings with Owner and Design Team: PE is responsible to prepare agenda and all supporting documents for the OAC meetings. PE is to attend meetings, take accurate notes, produce and distribute meeting minutes in a timely fashion and save meeting minutes to Procore. Meetings need to be conducted in a Professional manner. • Owner Progress and Pay Application Meetings: PE is to attend meetings, take accurate notes, produce and distribute meeting minutes in a timely fashion and save meeting minutes to Procore. Meetings need to be conducted in a Professional manner. • Project Manager Weekly Meeting – The PE is responsible for the agenda and meeting minutes where they will meet with the Project Team to review Project Buyout, Subcontracts, RFIs, Submittals, and Change Orders on a weekly basis. • Document Management Protocol: The PE is responsible for ensuring that all documents within scope of work are stored in Viewpoint according to the Document Management Protocol. KNOWLEDGE, SKILLS AND ABILITIES: • Provide direction to and resolve problems amongst subcontractors and vendors within PE scope of work. • Communication using the following tools: telephone, fax machine, written logs, email, computer, Smartphone and video camera. • Ability to work with little or no supervision. • Ability to meet deadlines, prioritize assignments and provide recommendations. • Communicate professionally and effectively. • Be able to provide support to senior management and multiple project managers simultaneously. • Strong organizational skills. • Strong ability to multi-task. • Excellent written and verbal skills. • Excellent working knowledge of Microsoft Office Products. • Viewpoint Software experience preferred • Ability to follow processes and procedures. • Maintain and exercise integrity in all business dealings. • Ability to work with a variety of Project Manager(s), Superintendent(s) and other business associates.

Fuentea:  craigslist Ver publicación original

Ubicación
2016 N St Vrain St, El Paso, TX 79902, USA
Mostrar mapa

craigslist

También le puede interesar

Craigslist
Jefe de Equipo/Parte de Topografía Experimentado (254 E. 6th Ave., Suite 102)
Optimal Surveying & Mapping, Inc. (OSM), anteriormente O'Neal Surveying & Mapping, Inc., actualmente tiene una vacante para Jefe de Equipo de Topografía en su oficina de Tallahassee. Este puesto requiere un mínimo de 3-4 años como Jefe de Equipo. OSM ofrece salario competitivo y beneficios. Estos incluyen seguro médico, dental y de visión pagado al 100% por la empresa. La cobertura comienza después de un período de prueba de 60 días de empleo a tiempo completo. Además, este puesto incluirá 80 horas de tiempo libre pagado (PTO) y 7 días festivos pagados por año. Los empleados a tiempo completo reciben bonificaciones al menos una vez al año. OSM se esfuerza por trabajar una semana laboral de 4 días con jornadas de 10 horas, siempre que sea posible. El clima o la programación ocasionalmente podrían requerir trabajar 5 días o más, pero esto es una excepción. Nuestra semana laboral es principalmente de lunes a jueves. Este puesto requiere: • Realizar levantamientos topográficos de diseño para apoyar proyectos de ingeniería. La experiencia debe incluir, aunque no se limita a: establecer control horizontal y vertical, LiDAR, levantamientos "as-built", replanteo de construcción, levantamientos de linderos, topográficos, de nivel medio de marea alta, árboles, hidrográficos, humedales y levantamientos de transporte/rutas. • Capacidad para utilizar métodos convencionales y del Sistema de Posicionamiento Global (GPS). • Instruir a su equipo en los métodos adecuados de uso y mantenimiento del equipo de topografía. • Capacidad para operar el equipo con precisión y eficiencia para obtener los datos necesarios. Trimble Access es un plus. • Proporcionar notas de campo completas y precisas. • Se valora mucho la experiencia con FDOT. • Capacidad para trabajar bien con otras personas. Adicionalmente: • Capacidad para aprobar la verificación de antecedentes y toma de huellas dactilares de la FAA. • La certificación CST es un plus. • Se requiere diploma de escuela secundaria o GED para este puesto. • Se requiere licencia de conducir válida de Florida con historial de conducción aprobado/aceptable para este puesto. • Se requiere viajar durante la noche 3 o más noches a la semana, cuando sea necesario. • Ocasionalmente será necesario trabajar horas extras para cumplir con los plazos. • Capacidad para levantar 50 libras y transportar equipo. • Capacidad para acceder a lugares remotos en áreas de manejo de vida silvestre. • Buenas habilidades de liderazgo y comunicación. • Capacidad para seguir instrucciones de supervisores y proporcionar retroalimentación positiva. Tipo de empleo: Tiempo completo. Salario: $32 a $45 por hora, dependiendo de la experiencia. Este puesto está disponible inmediatamente.
242 E 6th Ave, Tallahassee, FL 32303, USA
$32-45/hora
Craigslist
¡Contratación de contratista / detalles arquitectónicos (berkeley)!
¡Estamos contratando y buscamos algunos candidatos calificados para unirse a nuestro equipo! Sweitzer Inc. es un contratista general B especializado en interiores comerciales, con enfoque en hostelería, tiendas minoristas y espacios de oficinas en todo el Área de la Bahía. Además de proyectos de construcción, operamos un taller de madera y metal en Berkeley que proporciona detalles arquitectónicos personalizados a nuestros clientes y a nuestros propios proyectos de construcción. Somos un equipo pequeño y dinámico con una cartera variada y exitosa; estamos buscando agregar personas creativas y motivadas a nuestro equipo a medida que nuestro trabajo se expande. Para integrarse bien en nuestro equipo, todos los candidatos deben- • Demostrar iniciativa y ser proactivos al buscar información y soluciones. • Asumir la responsabilidad de sus tareas y obligaciones. • Trabajar bien con otras personas, tener orientación al trabajo en equipo y excelentes habilidades de comunicación interpersonal. • Equilibrar la atención al detalle con la eficiencia en la realización del trabajo asignado. • Tener experiencia y competencia en el puesto al que están aplicando. • Contar con excelentes habilidades de gestión del tiempo. Debido a la naturaleza de nuestro trabajo y la variedad de proyectos que realizamos, se dará preferencia en todos los puestos a candidatos con experiencia más variada y versátil, así como intereses diversos. La compensación es competitiva y depende de la experiencia y nivel de habilidad, con oportunidades de crecimiento. Los beneficios incluyen tiempo libre remunerado y horarios flexibles. Actualmente estamos contratando para- • Supervisor de obra: Este cargo generalmente estará asignado a un solo proyecto y gestionará todas las comunicaciones diarias, la seguridad en el sitio, la programación de subcontratistas, la interpretación y coordinación de planos, y la secuenciación de materiales. • Carpintero: Buscamos carpinteros con al menos 3 años de experiencia que puedan moverse entre proyectos en obra utilizando herramientas manuales y proyectos en taller usando herramientas estacionarias. A veces este rol trabajará bajo la dirección de un supervisor y otras veces trabajará de forma independiente. Algunos trabajos serán rápidos y toscos, mientras que otros requerirán mucho detalle y precisión. Ser flexible será importante. Este puesto tiene amplio margen para crecer hasta convertirse en carpintero líder. • Fabricador: Este cargo trabajará directamente con nuestro gerente del taller para planificar proyectos y ejecutar su construcción en el taller. Se prefiere experiencia en trabajo con metal y madera, aunque se aceptan candidatos con alta competencia en solo uno de estos campos. Este rol frecuentemente implicará crear componentes en el taller y luego trasladarse a la obra para instalarlos. Las habilidades requeridas incluyen capacidad para leer y crear planos, crear y gestionar cronogramas de proyectos junto con el gerente del taller, y obtener materiales. Para ver algunos de nuestros proyectos anteriores, visítenos en sweitzergc.com Por favor envíe carta de presentación, currículum y referencias. ¡Esperamos conocerlo, gracias!
920 Talbot Ave, Albany, CA 94706, USA
Salario negociable
Cookie
Configuración de cookies
Nuestras aplicaciones
Download
Descargar en
APP Store
Download
Consíguelo en
Google Play
© 2025 Servanan International Pte. Ltd.