📢 💸 $3,000 SIGN ON, YOUR TRUCK, OUR TRAILERS! OWNER OPS 💸 📢

Mechanical Assembler Little previous experience in manufacturing is required. You can do this job if you have strong general mechanical skills and a desire to learn! Our client is locally owned and operated. Established in 1949, it has grown into a regional and national industrial equipment supplier, providing a combination of value added technical services, engineering, consultation, and quality products to a variety of markets. They provide mission-critical equipment to a wide variety of industries including Fortune 500 companies. PRIMARY DUTIES: Assemble and test large industrial products from bare parts, in "job shop" and production environment. This includes mechanical connections, supports and structures, and control panels. Build custom air compressor, vacuum pump, blower, and pump assembly packages. DESIRED QUALIFICATIONS: • Some experience to build and disassemble an engine or machine • Electronic Panel Assembly experience preferred but not required • Read & interpret assembly drawings • Mechanical skills • Physically able (lifting of 50 lbs occasionally) • Work well independently/self-starter and with a team DUTIES AND RESPONSIBILITIES: Such duties include, but are not limited to: • Assemble mechanical assemblies; such as air ends, blowers, and other compressed air system components, working on a shop floor. • Inspects components for proper assembly, specifications, fit and finish. • Plans assembly and positions components according to the knowledge of unit being assembled and through the interpretation of engineering drawings, layout drawings or electrical schematics. • Remove small quantities of metal with hand files, scrapers or machine tools to produce close fit between parts. • Bend and install tubing and fittings for oil lubrication/cooling systems. • Align couplings and subassemblies to the gearbox or other components. • Operate drill presses, milling machines, lathes, hydraulic presses, welders and other shop equipment to assist in assembly operations. • Test completed assemblies for proper operation, temperature, vibration and noise levels and complete required written reports. Troubleshoot, repair or replace faulty components. • Provide feedback in regards to design improvements, updates, and procedures, verbally and in writing, as required. • Work in conjunction with Floor Supervisor to ensure assemblies meet design parameters. • Perform workstation and shop clean-up duties as assigned. EDUCATION, EXPERIENCE, SKILLS, AND KNOWLEDGE Qualifications and Requirements: • Education: High School diploma or GED preferred, but not required. • Specialized training: mechanics, electrical • Previous experience is desired but not required. It should include mechanical assembly and disassembly. Desired Skills • The ability to learn to read and use handheld mechanical measurement devices (micrometer, dial indicator, caliper) as well as electrical measurement devices (Fluke meter). • Recognize common mechanical and electrical components • Passion for auto mechanics, building and/or tinkering with mechanical components • Excellent communication skills • Must work well with others in a safe and self-directed manner • Reading: Read and interpret the following documents: operating and maintenance manuals, employee manuals, safety guidelines, electrical schematics, blueprints, mechanical sketches, and electrical and mechanical reference charts. Day Shift: 5:00 am to 1:30 pm **Not public transportation accessible** Pay rate: $21.00/hr to start! Email us at portlandwest@pridestaff.com Or Call Today to Apply! 971.371.4028 And Walk-ins are welcome Monday to Friday from 9:00 am to 3:30 pm. 12600 SW Crescent Street Beaverton, OR 97005 PrideStaff Portland is a locally owned and operated Staffing Agency. PrideStaff is a winner of the coveted "Best of Staffing" Diamond award for 15 consecutive years for the highest level of satisfaction as rated by our valued Employees and Clients. Over the years, PrideStaff has been a consistent industry leader, developing technology and service processes that allow our organization to deliver superior performance. When it comes to your success, we leave nothing to chance. Let us support your job and career search and see the difference PrideStaff can make!

Aluminum Fabricator (2+ years exp) Pay: $24.00 - $30.00 per hour DOE Job description: Samson Sports is the leader in custom wakeboard towers and accessories in the marine industry. Our factory located in Camas, WA builds wakeboard towers for many high-end boat factories. Samson is a quickly growing, 25 year-old company looking to hire a career minded and detail oriented Aluminum Fabricator. We have extremely low turnover, offer competitive wages, a clean, well-organized shop, and a positive environment. If you take pride in your work and want to work with the best, we want you! Samson Sports offers a competitive wage with benefits that include medical, paid holidays, vacation, and 401k. Hours are Monday thru Friday, day shift, with possible overtime. • Must have at least two years on the job experience fabricating aluminum • Must have at least one year on the job aluminum TIG welding experience • Must be able to safely use hand tools, such as grinders, sanders, drills, etc. • Must be able to lift 50 pounds • Must be able to work full time • Applicant will be cutting, fitting, tack welding aluminum tubing and CNC parts • Must pass pre-employment drug screening Job Type: Full-time Benefits: • 401(k) • 401(k) matching • Employee discount • Health insurance • Life insurance • Paid time off • Retirement plan Experience: • On the job aluminum fabrication: 2 years (Required) • Aluminum TIG welding: 1 year (Required) Ability to Commute: • Camas, WA 98607 (Preferred) Ability to Relocate: • Camas, WA 98607: Relocate before starting work (Preferred) Work Location: In person

Hughes Circuits Inc is a growing Electronics Manufacturing business that supports Military, Medical, and Commercial Electronics. We are looking for energetic individuals for General Labor. If you have a desire to start your career and are looking for a great opportunity, we want to hear from you. No experience necessary. Must be a US Citizen or Lawful Permanant Resident, honest, dependable, have reliable transportation, and be able to pass a background check. Job Opportunities include: -1st and 2nd shift Production/General Labor •Full-Time •Over-time opportunities •401k matching •Health Insurance Plan •10 days PTO & 7 paid holidays Job qualifications: • Positive attitude and willingness to learn • Outgoing and friendly personality • Hardworking and dependable Must apply in person. Mon - Fri 8:00 a.m. to 4:00 p.m. Hughes Circuits, Inc. 546 S. Pacific St. San Marcos, CA 92078 Phone: 760-744-0300

Understanding and implementing the tools, methods, and materials addressed by the project design and assigned by the Production Manager. Daily maximizing of the allotted time available for production while continuously striving to produce the highest quality product possible. Taking the initiative to take advantage of all information sources to advance your skills and techniques for optimum personal performance. Bringing forward ideas and personal experience to develop the whole as well as other individuals. Assemble and install low voltage led lighting and push thru graphics into signs before shipping out to all parts of the USA. • Provide eight for eight. You are paid for eight hours of work, provide eight of quality production • Be on time. Be clocked in by 7:00am, clock in and out for lunch, clock out at the time that matches the hours reported, produce product in a timely manner • Be accurate. Fabricate exactly to the design specifications report your times and job number accurately, fill out material sheets as accurately as possible and turn them in as soon as you are done with your scope of work • Be Clean. Keep your work area clean, your product clean, your tools neat and orderly • Maintain a positive, constructive attitude. The company and your co-workers deserve the best of your creative aptitude. This can only come through when your attitude allows it

Duties will include deburring aluminum parts. Lapping aluminum parts. Filling up machines with coolant as needed.

Manufacturing Technician/Assembler Location: Vista, CA 92081 (Must be local) Payrate: $23-$25hr (Weekly pay + Medical Benefits) Duration: 6-9 month contract to turn permanent- based on performance Hours: Full-time: M-F 6am-2:30pm Summary: Our clients mission is “Advancing Cancer Diagnostics, Improving Lives” is at the heart of their culture. Global leader in cancer diagnostics with the most comprehensive portfolio from biopsy to diagnosis. Join our diverse, global team of talented people, and be inspired to grow every day. Together, we’re working at the pace of change to improve patient lives with diagnostic tools that address the world’s biggest health challenges. The Manufacturing Technician Assembler is responsible for assembling mechanical and optical components. This position is part of Production Team located in Vista, CA and will be an on-site role. You will be a part of the Production Operations Team and report to the Manager, Manufacturing responsible for working to assemble scanners and related products. If you thrive in a multifunctional, fast paced role and want to work to build a world-class manufacturing organization—read on. What You'll Do: • Follow written procedures and perform all steps required to assemble Aperio Digital Pathology scanners and related products. • Tasks may include, but are not limited to: • Electro-mechanical assembly • Routing of cable and harness assemblies o Building of optical sub-assemblies • Visual and mechanical inspections of components and assemblies • Installing software • Performing basic troubleshooting • Identifying proper focus of optical assemblies viewing through eyepiece or on computer monitor • Completing related paperwork What You'll Bring: • High School diploma or equivalent or in lieu of High School diploma, willing to accept 2+ years’ work experience in a manufacturing environment • 1+ year’s Manufacturing experience working as either Technician and/or Assembler; able to put things together • Able to assembly or connect electromechanical equipment • Some assembly experience; example: fit circuit cards together, torquing screws, etc. • Must have basic computer skills (i.e., Microsoft Outlook, Word, Excel) • Must have a positive, “ can do attitude" Open to getting feedback from your manager and love to learn! • Requires a strong team player; enjoys speaking with others and has a positive attitude • Ability to learn and pick up things quickly • Bonus: Experience working with medical devices • Ability to lift, move or carry equipment up to 25 lb. and able to stand for long periods of time