Senior Control Systems Engineer

Harco Fittings is a member of the IPEX group of companies. Our mission is to compete and grow using innovation, differentiation and extraordinary service. Harco Fittings LLC, founded in 1966 in Lynchburg, Virginia is a producer of gasketed joint injection-molded PVC and push-on gasketed joint ductile fittings. Our Harco locations span across seven states in the US and we are looking for new individuals to come be a part of a dynamic and growing team today! We currently have an exciting opportunity as a Fabricator. This role is based in our facility in Janesville, WI and reports to the Plant Manager. The hours are Mo-Fri from 5.30am until 2pm. The starting wage is $21.71 per hour.   Do not miss the opportunity to join a diverse group of people-centric professionals, thought leaders and rapid thinkers, entrepreneurs in spirit and status quo-fighters!   Job Summary Responsible for receiving, inspecting, and preparing parts for fabrication operations. Perform fabrication, assembly, and packaging operations. Principal Responsibilities Fabricate fittings to customer specifications using customized fabricating equipment, hand, power tools, adhesives, and fixtures. Obtain components from stock/production. Set-up equipment to match product requirements. Must be able to work in a team-oriented environment and demonstrate good communication skills. Inspect completed parts. Prepare parts for shipping by placing them in boxes or on pallets. Correctly label all parts and boxes as needed. Visually inspect all incoming pipes, components, and gaskets for defects. Apply 5S and Lean Manufacturing principles. Maintains a safe working environment by following Health, Safety and Environmental Policies and attending training that is provided where required. Maintains a respectful working environment by following Human Resource Policies and attending mandatory training when required. Assist in the coordination, preparation, and execution of year-end inventory. Completing and maintaining reports for managers as required, which may include: Production reports Scrap reports Other duties may be assigned when applicable. Requirements Previous experience in a manufacturing environment is strongly preferred, however, full training will be provided Must be knowledgeable in basic math Detail oriented with excellent analytical and problem-solving skills Must be a self-starter with good interpersonal and verbal communication skills coupled with an eagerness to learn Good team player including with a demonstrated ability to chip in to and foster a positive team environment Working knowledge of Health and Safety practices is helpful. After training, should exhibit an understanding of various types and sizes of pipes. Working Conditions Manufacturing plant environment Requires good mobility and involves considerable routine walking, standing for long periods, bending, and heavy lifting of 50 - 75 lbs. The use of hand tools including heat forming, pulling, belling, caps, reducer, saws, gluing Fast-paced environment where a considerable amount of sensory attention is required Benefits 401K plan with company match Comprehensive Health, Dental, and Vision coverage options Vacation and holidays Set schedule with bi-weekly pay Basic safety equipment (i.e. safety glasses, ear plugs) will be provided Reimburse COBRA costs while transitioning to IPEX benefits   IPEX is committed to providing accommodations for people with disabilities throughout the recruitment process and, upon request, will work with qualified job applicants to provide suitable accommodation in a manner that takes into account the applicant’s accessibility needs due to disability. Accommodation requests are available to candidates taking part in all aspects of the selection process for IPEX jobs. To request an accommodation, please contact HR at HR@ipexna.com. EOE.

Mechanical Engineer needed for Manufacturer of Emergency Lighting in Ridgewood, Queens, NY Job Description Work with a team of other engineers to design, draft, and prototype using SolidWorks and latest technology in rapid prototyping Program HAAS CNC using CAMWorks Injection mold design Must be able to work independently and/or in a team environment Qualifications Use of CAD/CAM software to program multi-axis mill-turn machines Experience in the design of injection molds Familiar with SolidWorks and CAM works Mechanically able to assemble and disassemble parts and assemblies Familiarity with Coast Guard Codes and Regulations a plus Compensation and Benefits: Full time position / Hourly compnsation to be based on experience Paid Holidays/Time off Office hours, M-F 8-4:30pm Pleasant working environment

Umbra is an American space technology company delivering advanced systems, from sensors to spacecraft, that empower customers worldwide with unmatched access to critical information from space. Our mission is simple and ambitious: redefine space—for people, systems, and missions in every domain. Umbra’s ecosystem operates through three business units: Remote Sensing (the data), Space Systems (the components), and Mission Solutions (the platforms).Together, our teams develop capabilities that deliver persistent access, resilient performance, and mission-ready solutions, advancing U.S. space leadership while keeping the world safe and informed. About the Team Space Systems – The Components Space Systems is where Umbra turns hardware and software designs into on-orbit realities; developing, implementing and iterating mission-ready core technology, while simultaneously advancing the next generation of our own satellite constellation. Space Systems is vertically integrated across the satellite architecture, thus the team designs, builds, and tests an array of critical components and subsystems, including power systems, communications, control systems, deployment hardware, avionics, and payloads, as well as the flight software, firmware and digital design solutions to support the entire hardware stack. Our focus is on first principles engineering, and our mandate is simple: it has to work when it counts. Every bolt, board, and binary is proven on our own SAR constellation, ensuring flight-proven reliability where failure is not an option. If you want to work on cutting edge space technology while maintaining the highest standard for innovation and mission ready performance, you belong here at Umbra. About the Job Join Umbra's Manufacturing team as a Spacecraft Aerospace Technician and play a crucial role in building the satellites we launch every year. In this position, you will be hands-on in the assembly and testing of our advanced spacecraft systems. Your expertise will not only contribute to the successful construction of satellites but also help streamline and enhance our manufacturing processes across multiple builds. If you're passionate about aerospace technology and eager to make an impact, we want to hear from you! This position is based on-site in our Santa Barbara, CA office. Key Responsibilities: Support assembly and test on a variety of spacecraft manufacturing tasks. Contribute to maintaining and improving manufacturing and test infrastructure. Communicate and work with engineers to develop and document test procedures. Maintains manufacturing documentation and reports (assembly procedures and test reports). Assist in the design and fabrication of test fixtures. Requirements Required Qualifications: High school diploma or equivalency certificate. 8+ years of experience working in an aerospace, manufacturing, military or automotive environment. Ability to read and interpret electrical schematics and mechanical drawings. Familiarity with mechanical measuring equipment such as; torque wrenches, fixtures, tooling, gages, calipers and other measuring devices. Ability to manipulate equipment weighting up to 50 pounds. Comfortable working in a dynamic and fast-paced development environment. Strong computer skillset, including Microsoft Office navigation and file manipulation. Manual dexterity with the ability to handle and assemble small parts. Ability to work paid over-time as necessary to complete the mission. Desired Qualifications: 15+ years of experience in assembly of complex mechanical / electrical systems with preference to small team / startup environments. Experience working with delicate spacecraft hardware, especially wire harnessing and moving mechanical assemblies. Strong interpersonal and verbal communication skills. Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment. Ability to take project goals inputs and works towards that end-goal beyond individual task assignment. Certification in engineering disciplines. Benefits 15 Days of PTO Accrual, Sick, Family & Medical Leave Medical, Dental, Vision, Life, LTD, STD (employer funded) Vol Life, Critical Illness, Accidental, Hospital Indemnity, Pet Insurance (employee funded) 401k with 3% non-elective company contribution Stock Options Free parking Free lunch in office daily Umbra is an Equal Opportunity Employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by federal, state, or local law. Employment Eligibility Verification In compliance with federal laws, all hired persons will be required to verify their identity and eligibility to work in the United States by completing the required Employment Eligibility Verification Form (I-9 Form) upon hire. ITAR/EAR Requirements This position may include access to technology and/or data that is subject to U.S. export controls pursuant to ITAR and EAR. To comply with federal export controls, all persons hired must be a U.S. citizen, U.S. national, U.S. lawful permanent resident, refugee or asylee as defined by 8 U.S.C. § 1324b(a)(3), or must otherwise be eligible to obtain the required authorizations from the U.S. Department of State and/or U.S. Department of Commerce as applicable.  Pay Transparency This job posting may cover multiple career levels. To ensure greater transparency, we provide base salary ranges for all roles, regardless of location. Our standard pay ranges are based on the role’s function and level, benchmarked against similar growth-stage companies. Compensation may vary based on geographical location, as certain regions may have different cost-of-living factors. The final offer will also be influenced by the candidate's skills, responsibilities, and relevant experience. Compensation Range The Compensation Range for this role is $52.88/hour - $62.50/hour DOE.

Warehouse Associate Denver, CO • Bron Tapes Inc Description Warehouse Associate Bron Aerotech Open Until Filled Who is Bron Tapes? We are a premier distributor of pressure sensitive tape and adhesive products. We pledge to provide our customers with exceptional service, on-time delivery and quality products at competitive prices. We were founded in Denver, CO in 1977 and are proud to celebrate 40+ years of success! We have locations in AZ, TX, NV, CA, CO, UT, WA, OR and GA. Job Summary: The Warehouse Associate works to support the various needs of the production environment by packaging orders and preparing them for shipment, assisting with inventory management, and maintaining the general upkeep and organization of the facility. Essential Duties & Responsibilities: · Packaging and labeling orders per customer requirements · Preparing products for shipment and creating shipping labels · Assisting with inventory management and material handling · Collaborating with multiple departments to ensure accuracy of finished product · Maintaining a clean and organized warehouse · Operating a forklift when required · Other duties as assigned TO APPLY: https://recruiting.paylocity.com/recruiting/jobs/Details/3601593/BRON-TAPES/Warehouse-Associate Requirements Qualifications High school level Math & English literacy Ability to lift up to 60lbs regularly Ability to remain on feet for long periods Attention to detail Must be punctual and dependable Mechanical aptitude a plus Forklift certification a plus Physical Requirements: · Ability to lift up to 50lbs when required · Prolonged periods of sitting and/or standing Benefits: Bron Tapes offers a full benefits package after 30 days of employment. 401k with match (after 60 days of employment) Medical – United Healthcare Dental – United Healthcare Vision – United Healthcare Flexible Spending Accounts Short-and Long-Term Disability Insurance Life Insurance Employee Assistance Program (EAP) MetLife Plans (Accident, Legal, Critical Illness & Hospital Indemnity) ID Theft Paid Vacation and Sick Time Job description statements are intended to describe the general nature and level of work being performed by employees assigned to this job title. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required. Bron Tapes, Inc (including all subsidiaries: Bron Converting, Inc., Bron Aerotech, Inc., and Bron Holding, Inc.) is an equal opportunity employer. All employment is decided on the basis of qualifications, merit, and business need, qualitied persons will not be denied employment opportunity based on race, color, national origin, religion, sex, sexual orientation, gender identity, age, disability, genetic information, marital status, veteran status or any other basis covered by appropriate law. Any questions about our EEO policy should be directed to Human Resources. Bron Tapes is an E-Verify employer. NO RECRUITERS/STAFFING AGENCY INQUIRIES PLEASE!

Chiller Finisher – Start Your Exciting Career in Refrigeration! Are you a hands-on, hardworking individual looking to kickstart a career in the exciting world of refrigeration? Do you have a passion for working with your hands and take pride in a job well done? If so, we have the perfect opportunity for you! About Us: At American Chillers, we specialize in designing and manufacturing cutting-edge refrigeration solutions, including industrial process chillers. A chiller is a device that cools equipment or products during manufacturing and industrial processes, ensuring they operate at optimal temperatures. Our chillers are used in various industries, including medical facilities, cold plunge and spas, brewery & beverage, ice cream & yogurt, specialty HVAC and many more! Who We’re Looking For: Highly Motivated: You take initiative and are always looking for ways to improve and excel. Hardworking: You’re not afraid to roll up your sleeves and get the job done right. Detail-Oriented: Precision is key in this role, and you have an eye for detail. Willing to Learn: Whether you’re new to the industry or have some experience, you’re eager to develop your skills. Job Description: As a Chiller Finisher, you will play a crucial role in the final stages of the chiller manufacturing process. Your primary responsibilities will include: Insulating chiller piping and components Cleaning units and inspecting for any damage Performing detailed work such as painting, polishing, and labeling Using standard woodworking equipment to palletize and crate equipment for shipment Finalizing paperwork Collaborating with a team of skilled technicians and engineers Maintaining a clean and organized workspace Why This Opportunity is Exciting: Hands-On Work: If you love working with your hands and have an eye for detail, this role is perfect for you. You'll get to work on intricate components and see the direct results of your craftsmanship. Career Growth: Join a company that values training and development. We provide opportunities for career advancement and skill-building in the refrigeration industry. Innovative Environment: Be part of a team that's at the forefront of refrigeration technology. You'll work on state-of-the-art equipment and contribute to innovative solutions. Team Collaboration: Work alongside experienced professionals who are passionate about what they do. Enjoy a supportive and collaborative work environment. Impactful Work: Your role is essential in ensuring our chillers meet the highest standards of quality and performance, making a real difference in various industries. Schedule: 8 hour shift Monday to Friday Experience: Manufacturing: 1 year (Preferred) Carpentry: 1 year (Required) Hand tools: 1 year (Required) Work Location: In person Requirements Ability to follow instructions and work well in a team Strong attention to detail and a commitment to quality Basic mechanical skills and experience with hand tools Previous experience in fabricating or assembly Learner’s attitude High school diploma or equivalent Valid driver’s license Benefits Join Us and Start Your New Career Today! If you're ready to embark on an exciting new career path in refrigeration, we want to hear from you! Apply now to become a Chiller Finisher at American Chillers and be part of a team that values hard work, innovation, and quality. Compensation: $16-$20 per hour (based on experience) Overtime opportunities Benefits 401(k) 401(k) matching Opportunities for advancement Paid time off

Vivid Inc. is a large functional and aesthetic coatings with multiple South Bay locations. We process parts for some of the largest medical, automotive, semiconductor, and telecommunications companies in the world. We are currently in our 35th year of business. We are looking for people with good energy that want to grow their career. Position Summary – Thermal Operations Manager The Manager ofThermal Operations will be responsible for overseeing all day-to-day operational functions of Vivid’s Thermal Spray operations in Santa Clara— including equipment maintenance, processing, manufacturing, applicable technological innovation, implementation of 6-sigma and lean tools. Key Responsibilities Production, Processing and Manufacturing Oversight • Lead and manage thermal spray production operations to ensure timely delivery, consistent quality, and cost efficiency. • Develop and maintain production schedules, resource allocation, and workflow optimization. Maintenance and Reliability • Supervise Thermal Spray operations facility and equipment maintenance to minimize downtime and extend asset life. • Implement preventative and predictive maintenance programs. Continuous Improvement & Quality • Work with quality management systems and corrective actions to reduce defects and rework. • Support standardizing processes, documentation, and best practices throughout thermal operations. Qualifications • Strongly prefer leadership experience in manufacturing, preferably in technically demanding environments. • Experience and strong abilities to troubleshoot, install and maintain industrial equipment including air Compressors, dust collectors, motors, and a willingness to trouble shoot thermal coating equipment. • Strong understanding of facilities electrical and plumbing installation and maintenance. • Strong technical understanding of surface treatments, paints, or precision finishing processes, or similar processes required. • Bilingual in Spanish and English is strongly preferred • Detail-oriented, honest, transparent and resourceful. • Bachelor’s Degree in Engineering degree is preferred but not required. Compensation - Salary is dependent on skills and experience $44/hr - $60/hr. Lots of room for growth. - 401k Plan Please send a resume and details about your experience if you are interested and qualified.