LAND DEVELOPMENT CIVIL ENGINEERS CAD PMs E.I.T PE 100k + FULL BENEFITS (East, Central and West Valley)

COMPANY OVERVIEW: Cloacina, LLC is a manufacturer and purveyor of package wastewater treatment plants and industry equipment located on the Central Coast of California. It is owned and managed by a family of licensed operators and maintenance mechanics, now four generators deep. We are currently seeking to fill the position of Controls Engineer/Controls Engineering Manager. POSITION SUMMARY: Cloacina is seeking a Controls Engineer/Controls Engineering Manager to assist with the design, maintenance, and troubleshooting of their Membrane Bio-Reactor (MBR) systems and associated equipment. The candidate will also assist the Cloacina Electrical Engineering department with PLC control panel design, networking design and implementation, and equipment factory acceptance testing (FAT), assist the Cloacina Engineering department with control methodology design, and assist the Cloacina Lifecycle team with troubleshooting and remediation of problems observed on existing operational systems. Note that Cloacina is looking for individuals with a strong work ethic, eagerness to learn, and a good fit for the company culture, even if they lack certain specific technical skills. Cloacina is willing to train and develop a motivated individual with the right aptitude. RESPONSIBILITIES: The following responsibilities will be expected of the candidate: • Interpret control panel schematics and engineering drawings (e.g. P&ID’s) designed by Cloacina Electrical Engineering department. Work with that department to make any modifications, revisions, as-builts, and improvements. • PLC development programming for the equipment control systems based upon the unit-process-diagram (UPD) process control diagrams generated by the Cloacina Engineering department. Work with that department to make any modifications, revisions, as-builts, and improvements. This will require programming with Rockwell Automation RSLogix 5000 ladder logic for CompactLogix 5380 systems and Rockwell Automation FactoryTalk SE Studio for HMI visualization displays. • Programming support for equipment factory acceptance testing (FAT), working with field electricians and automation technicians to verify equipment operates as intended prior to shipment to customers. • Programming support for equipment site acceptance testing (SAT), working with field electricians and automation technicians to validate it operates properly once installed at customer location. • Programming support for Cloacina Lifecycle group to troubleshoot any issues with existing operational systems. This will require review of customer statements of the problem they’ve observed, interpretation of what actual issues could be occurring, logging into the system and pulling data and reviewing code to determine a root cause. Then communicating that analysis to the appropriate parties for resolution of the problem and/or modifying PLC program. REQUIRED QUALIFICATIONS: The following abilities will be expected of the candidate. • PLC programming, particularly Allen Bradley RSLogix 5000 ladder logic for CompactLogix 5380 systems. • Understanding of general control theory, including feedback, feed-forward, PID loop, etc. control methodologies and algorithms. • Understanding of PLC hardware design, including specification and configuration of digital and analog input and output cards and their interaction with the PLC controller itself. • Understanding of general IEEE 802 Ethernet networking, including switching and routing methods and common protocols like DHCP, BootP, NAT, Ethernet/IP protocol for control systems. • Strong communication skills, to be able to speak both in technical terms to Cloacina personnel and client/customer technical personnel, as well as simplifying and translating into general terms for nontechnical personnel. • Technical writing ability for documentation of system designs and configurations. • Ability to productively work both independently and cooperatively in conjunction with assistance. • Ability to multitask and work on several projects/tasks simultaneously. • Bachelor’s degree in Electrical Engineering, Controls Engineering, a related discipline, or suitable experience. DESIRED/PREFERRED QUALIFICATIONS: The following abilities are desired of the candidate but not required. • Experience with programming, configuration, and setup of VFD’s. Particularly, Allen Bradley PowerFlex 520-series & 755-series, Schneider Altivar series, Danfoss, and/or ABB drives. • General purpose programming experience (i.e. C++, Python, MS Office VBA, database SQL scripting, etc.) • Understanding of common process equipment, including pumps, automated valves, solenoids, and typical instrumentation. • Ability to troubleshoot PLC control systems and associated equipment, like relays, switches, and instrumentation (both 4-20mA analog and discrete signalling). • Experience with SCADA systems (e.g. WonderWare, Ignition, or similar). • Knowledge of applicable Codes and Standards, including ISA, NEC, IEEE, UL, OSHA. PYSICAL REQUIREMENTS: • Prolonged periods sitting at a desk and working on a computer. • Must be able to lift up to 25 pounds at times. POSITION OFFERS: Position offers competitive salary, medical/dental/vision benefits, FSA, life insurance, paid time off, and safe harbor 401(K). NOTICE OF WORK ENVIRONMENT & OCCUPATIONAL HAZARDS: The wastewater industry can be hazardous due to exposure to biological and chemical hazards, as well as physical dangers, including but not limited to, confined spaces, slips, falls, wet and/or humid conditions, high and/or low altitude, moving mechanical parts, high and/or precarious places, fumes and/or airborne particles, outside weather conditions, extreme cold, extreme heat, risk of electrical shock, vibration, sewage, epoxy coatings, solvents, and excessive noise levels.  Employees may come in contact with wastewater which contains human waste.  Wastewater contains various bacteria, viruses, and parasites that can cause diseases in humans and animals.  Workers can be exposed through contact with wastewater, aerosols containing pathogens, or contaminated equipment.  Wastewater treatment processes also involve the use of various chemicals, some of which can be toxic or corrosive.  It is imperative that employees wear proper Personal Protective Equipment (PPE) and follow safety protocols.  While not mandatory, it is also highly recommended that employees stay current with vaccinations, including Hepatitis A, Hepatitis B, Tetanus, and Diphtheria.

Hi! We are a luxury boutique landscape design / build firm in Los Angeles, looking for an experienced landscape / hardscape designer with a passion for creating stunning luxury landscape design. ABOUT THE COMPANY: At Kate Anne Designs, we create beautiful, practical landscapes that make a difference in people's lives. We really believe in nurturing through nature. We love to have fun and challenge ourselves in creating healthy relationships with our clients, designers and contractors. We have gained a reputation for our refined rustic vision in the landscapes that we create, and the relationships that we develop. You can learn a bit more about us at www.kateannedesigns.com. QUALIFICATIONS WE'RE LOOKING FOR: Ideally 5+ years of previous experience heading up projects for another established landscape design firm or experience working on their own larger-scale projects. Formal education in landscape / hardscape design. Upbeat and driven to create stunning environments that positively impact people's lives. Knowledge of Mediterranean plantings and their characteristics, growth habits, ideal planting conditions, etc. Experience working with hardscape material vendors so as to research and specify materials for a design. Ability to speak and write in English fluently. Ability to speak Spanish is a plus but not necessary. Excellent communication and conflict resolution skills with clients and contractors. A positive, self-starter attitude. Able to confidently and smoothly present a complete design to a client, and run the whole design through from initial consultation, preparing and presenting design, detailing out the design elements, coordinating outside engineers / consultants, turning design over to contractor for bidding, and design coordination during installation phase. Has reliable transportation with a valid current drivers license. Proficient with AutoCAD is a plus but not necessary. Proficiency with Sketchup or another rendering software is a plus but not necessary. A portfolio of luxury residential work is key. COMPENSATION: Project-based compensation either as a flat fee or hourly proposed by you. We would pay you as an independent contractor and you would represent our company with our clients. You would work from home on your own schedule. If this looks like a good fit for you, please reach out, we'd love to chat with you! If you would kindly add the word "NATURE" as the first word of the subject line in your email, that way we know you've had the chance to read through everything. Thank you so much, we can't wait to hear from you!

Need a licensed P.E. to provide and review structural calculations for permitting. Individual only, no firms. Part-time side job preferred on an as-needed contract basis. Prefer Steel Moment frame and Concrete experience.

NYSFAB is a well-established company that has numerous contracts with the Metro Transit Authority. We are looking for an entry level or experienced detailer to develop submittal drawings and parts drawings. NYSFAB is willing to train and guide employees to excel. Required - Experience in AUTOCAD/Tekla/SDS2 (Any of the following) Bluebeam REVU. Interested party please apply ASAP. Benefits: -Competitive pay and benefits. -Opportunities for growth and training. -Supportive team and positive work environment. -Additional perks like discounts, flexible hours, etc. Schedule: -8 hour shift Ability to commute/relocate: -Jamaica, NY 11433: Reliably commute or planning to relocate before starting work (Required) Experience: -Detailing: 1 year (Preferred) Work Location: In person

Northern Geotechnical Engineering, Inc. - Terra Firma Testing (NGE-TFT) is currently accepting applications for an entry-level, full-time CAD/GIS Technician position within its geotechnical engineering department. NGE-TFT is an Alaska-based, employee-owned business providing geotechnical engineering and construction materials engineering & testing (CoMET) services to residential, commercial, governmental, tribal, and resource development projects across Alaska. For more information about NGE-TFT, you can visit our website at www.nge-tft.com. Job Description: NGE-TFT is seeking dynamic and self-motivated individuals with CAD and/or GIS experience supporting civil engineering design and/or geoscience disciplines. The position will support our geotechnical engineering department with any/all CAD and/or GIS-related tasks; including (but not limited to): • Preparing design drawings and report figures using both CAD and GIS platforms; • Building & maintaining a variety of GIS databases; and • Preparation of subsurface exploration logs. Opportunities to gain experience in geotechnical engineering and/or CoMET disciplines will be available depending upon a candidate’s educational background, interest, talent and/or desire to do so. The successful candidate’s duties will be conducted out of our office headquarters located in Anchorage, Alaska following a standard 40-hr workweek, however, flexible work schedules and/or remote workplace options are possible. Representative Duties: • Performs tasks to create, edit or verify CAD drawings and related data. • Performs tasks to create or update CAD drawings from notes, sketches, drawings, data files, GPS, or verbal direction. • Creates GIS mapping databases and produces drawings and report figures using GIS. • Creates reports or extracts data using reporting tools or pre-defined queries. • Download, convert, and upload CAD/GIS data available from internal or external sources. Catalog, inventory, and consolidate CAD/GIS data, including metadata creation to department standards. • Assists with CAD/GIS software enhancements, upgrades, and configurations. • Performs other related duties and projects as assigned. Education: All candidates for the position must have (at a minimum) a high school diploma (or equivalent) plus completion of twenty (20) total college semester credit hours in CAD, GIS/geomatics, remote sensing, photogrammetry, computer science, natural science, surveying technology, engineering, urban planning, cartography, geography, or related fields. Minimum of nine (9) credit hours is required in CAD. A degree or formal CAD certification is preferred.   Experience: Four (4) years of work experience where CAD is a major responsibility is required. Additional work experience where CAD is a major responsibility above the required four (4) years may be substituted for the required education; likewise, additional education in CAD may be substituted for up to two (2) years required work experience. For these purposes, one (1) year of experience is equivalent to six (6) college semester credit hours of education. Knowledge/Skills/Abilities: • Must have the ability to proficiently and independently operate CAD software packages to perform the representative duties. • Must have the ability to learn or do basic GIS editing. Some GIS experience or education preferred. • Must be detail and accuracy oriented. • Must have strong mathematical skills. • Should have an understanding of civil drafting disciplines, drawing standards, associated symbology and design concepts. • Ability to translate documentation to update CAD data and displays. • Knowledge of and ability to follow QA/QC procedures. • Ability to import and export data to various formats. • Ability to understand land-based coordinate systems. • Must exhibit excellent English verbal and written communication skills. Skilled in writing instructions, documentation and reports. • Perform scanner/plotter/printer operation and maintenance. • Ability to work in a team environment. • Must be able to work with Microsoft Office products • Character, integrity and a positive attitude are prerequisites. Compensation: Compensation will be based on the candidate’s experience and will be adjusted periodically based on performance, tenure, and inflation. However, starting pay for this position will typically range between $33-$38/hr (DOE). Successful candidates will be subject to a probationary employment period, after which company-provided benefits (paid leave/medical/dental/401k/profit sharing/etc.) will apply. Out-of-state relocation expenses will be considered. Submissions: Interested applicants should submit a copy of their resume, including any related work experience, and at least two professional references to NGE-TFT via fax at (907) 344-5993 or via email at sgray@nge-tft.com. All candidates for the position must also include a concise (1-page) cover letter introducing themselves, describing their professional ambitions, career expectations, and short/long-range goals.

GLR Engineers is seeking structural engineer applicants for a project manager position in our Spokane, WA office. The applicant shall have a minimum of 6 years of relevant experience in the field of structural consulting design. Desired experience shall consist of working with multiple types of building materials, project types and the ability to contribute on multiple projects and deadlines. The selected applicant will be expected to produce structural calculations required for permit submittals, work with GLR’s in-house drafting department to produce construction drawings, coordinate with architectural clients and other design team members, and succeed in operating in a team environment. Knowledge of Revit modeling is a plus. Applicant must be self-motivated with a strong drive to learn and expand their knowledge base. GLR Engineers is a structural engineering firm with offices in downtown Boise, ID and Spokane, WA. We work on a variety of project types across the country and offer a diverse range of design experience on a week to week basis. Work will be shared between both office locations, therefore web-based communication skills are a must. We offer a competitive salary, benefits, and flexible work hours. Our goal is to provide a very comfortable, family friendly and enjoyable work atmosphere. GLR Engineers is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. Please reply with your resume for review and consideration. No phone calls please.