Field Service Engineer, AR

Job # EE25063 Job Title Field Engineer – Drives and Control Systems Office Location Roanoke, VA; NC, GA, TX, IN, FL Preferred Business Function/ Department Industrial Systems/Field Engineering Production Systems Sales Territory, if applicable N/A General Role Description Provide Technical Advisory Services (TAS) to coordinate installation and commissioning activities for assigned projects while meeting project schedules and performance criteria. Role Accountabilities -   Commission AC and DC drive systems and/or control software to meet design performance criteria -   Perform tune up of closed loop regulators to ensure optimal equipment performance and meet design parameters -   Troubleshoot and correct process application problems in complex control systems -   Design, configure, and test system software and hardware to meet contractual requirements when assigned -   Gather pertinent information from authorized sources to assess project requirements as related to assigned scope of work -   Provide regular, accurate, and considered commissioning status reports to parties deemed appropriate to the situation -   Lead respective process component of client witness system acceptance test when assigned -   Recommend changes to commissioning procedures to improve system performance -   Recommend software or hardware improvements to engineering department -   Maintain current safety qualifications appropriate to the assigned tasks and adhere to both Company and client safety requirements -   Ensure proper safety equipment is available and in good working condition, as assigned -   Coach associates in specific areas of technical expertise when identified by management as a function expert -   Train client personnel on system maintenance procedures and/or system operation to ensure optimum performance and minimum downtime -   Plan and execute special projects up to 9 months in duration to support the department when assigned General Employee Accountabilities -   Bring full effort to bear on tasks assigned by manager -   Give manager best advice -   Give earliest notice when work cannot be delivered as specified -   Cooperate and collaborate with peers and interact cross-organizationally as specified by manager -   Exemplify Company Core Values:  Integrity, Client Focus, Team Orientation, and Personal Commitment -   Comply with all Company policies, practices, and procedures and all regulations and laws -   Recommend viable improvements proactively -   Ensure effective utilization of business tools and processes Requirements Minimum Qualifications -   Bachelor’s degree in electrical engineering, mechanical engineering with control automation coursework, mechatronics, computer engineering or related field or equivalent via education and/or work experience -   2 years’ experience with process and automation controls -   2 years’ field engineering experience or 2 years’ experience working in the metals, material handling, paper, or general industries -   Demonstrated successful and positive personal leadership, interpersonal, organizational, administrative and communication skills -   Demonstrated successful working relationships with clients, suppliers, and other internal and external contacts -   Proficiency in MS Excel, Work and Access -   Availability to travel, domestically and internationally, more than 75% of the time, sometimes with limited notice Preferred Qualifications -   Demonstrated experience working with international clients and field service personnel -   Demonstrated experience in international field engineering -   Demonstrated experience in the metals, material handling, paper, or general industries -   Proficiency in Oracle ERP -   Proficiency in MS Projects Link to TMEIC Corporation website:  https://www.tmeic.com/.  In order to be considered for a job opening, all applicants must complete an on-line job application, in full, for each job opening.  A resume can be attached to the on-line application, but is not considered a substitute for the information in the application.  Applications are not accepted for positions not posted.  Current job listings, along with our application, can be found on our website.  Select “Career Opportunities” on the “Careers” tab of our website. Please, no telephone calls. EEO/AA/M/F/Vet/Disability Employer

DraftWorks Architecture is seeking a Licensed Architect (California) for ongoing freelance, project-based collaboration. About the Role: You’ll handle plan drafting, HOA submissions, and city permitting for residential projects such as garage-to-ADU conversions, remodels, and additions. Perfect for an independent architect seeking flexible, steady project work without full-time commitment. Responsibilities: Prepare and stamp plan sets for City of Sacramento and HOA approval Coordinate with homeowners, engineers, and city planning departments Respond to plan check comments and maintain project compliance Provide design input and revisions as needed Requirements: Active California Architectural License (required) Minimum 1 year of residential design and permit experience Skilled in AutoCAD or Revit Reliable communication and attention to deadlines Compensation: Per-project pay depending on scope (average $1,500–$3,500 per project) We average 10–20 projects per month, offering a consistent stream of work with flexible scheduling. Flexible schedule – remote or local collaboration Paid directly per approved project phase Travel reimbursement is provided for occasional site visits (measurements, inspections, or HOA review meetings) within the Bay Area or Sacramento region. About Us: DraftWorks Architecture is an independent Sacramento-based design firm specializing in ADUs, remodels, additions, and permitting. We focus on simplifying the design-to-permit process for homeowners while maintaining professional design quality.

Job # EE25074 Job Title Field Engineer – Port Solutions Office Location Roanoke, VA, TX, GA, OH, NC preferred Business Function/Department / Industrial Systems/Field Engineering Port Solutions Sales Territory, if applicable  General Role Description Provide Technical Advisory Services (TAS) to coordinate installation and commissioning activities for assigned projects while meeting project schedules and performance criteria. Role Accountabilities -  Commission AC and DC drive systems and/or control software to meet design performance criteria -  Perform tune up of closed loop regulators to ensure optimal equipment performance and meet design parameters -  Develop, verify and implement algorithms that define the electro-mechanical operation of industrial/Port machinery, primarily Port crane systems -  Troubleshoot and correct process application problems in complex control systems -  Design, configure, and test system software and hardware to meet contractual requirements when assigned -  Gather pertinent information from authorized sources to assess project requirements as related to assigned scope of work -  Provide regular, accurate, and considered commissioning status reports to parties deemed appropriate to the situation -  Lead respective process component of client witness system acceptance test when assigned -  Recommend changes to commissioning procedures to improve system performance -  Recommend software or hardware improvements to engineering department -  Maintain current safety qualifications appropriate to the assigned tasks and adhere to both Company and client safety requirements -  Coach associates in specific areas of technical expertise when identified by management as a function expert -  Train client personnel on system maintenance procedures and/or system operation to ensure optimum performance and minimum downtime -  Plan and execute special projects up to 9 months in duration to support the department when assigned General Employee Accountabilities -    Bring full effort to bear on tasks assigned by manager -    Give manager best advice -    Give earliest notice when work cannot be delivered as specified -    Cooperate and collaborate with peers and interact cross-organizationally as specified by manager -    Exemplify Company Core Values:  Integrity, Client Focus, Team Orientation, and Personal Commitment -    Comply with all Company policies, practices, and procedures and all regulations and laws -    Recommend viable improvements proactively -    Ensure effective utilization of business tools and processes Minimum Qualifications -   Bachelor’s degree in electrical engineering, mechanical engineering with control automation coursework, mechatronics, computer engineering or related field or equivalent via education and/or work experience -   2 years’ experience with process and automation controls -   2 years’ field engineering experience or 2 years’ experience working in the metals, port solutions, paper, or general industries -   Demonstrated successful working relationships with clients, suppliers, and other internal and external contacts -   Demonstrated successful and positive personal leadership, interpersonal, organizational, administrative, and communication skills -   Demonstrated continuous improvement in areas of responsibility -   Proficiency in MS Excel, Word, and Access -   Ability to climb and work on cranes at heights up to approximately 175 feet -   Availability to travel, domestically and internationally, more than 75% of the time, sometimes with limited notice Preferred Qualifications -   More than 3 years’ experience servicing a wide range of port equipment including overhead traveling cranes and components -   Demonstrated ability to install, inspect, and maintain lifting equipment in accordance with relevant operating/installation instructions -   Demonstrated experience working with international clients and field service -   Demonstrated experience in international field engineering -   Demonstrated experience in the metals, port solutions, paper, or general industries -   Proficiency in Oracle ERP -   Proficiency in MS Projects Link to TMEIC Corporation Americas website:  https://www.tmeic.com/.  To be considered an applicant for any available positions, individuals must complete an online job application for each posting.  A resume may be attached to the online application but is not considered a substitute for the information in the application.  Applications will be considered only for the specific position for which the application is submitted EEO/AA/M/F/Vet/Disability Employer

BMA Mechanical+ is a company for problem solvers, innovators, and team players. We get excited about things like saving energy and water, designing with the latest and greatest, and helping our customers achieve their vision. Our mission is to develop, support, and shape the built environment with innovative, resilient, and sustainable solutions. We call it the California Standard. Job description:  As an HVAC & Plumbing Drafter/Specialist or Designer, your primary responsibility is to support the design and engineering teams by creating detailed and accurate drawings using relevant software and tools. Specializing in HVAC and plumbing engineering, you play a crucial role in translating conceptual designs into comprehensive, precise, and technically sound construction documents. Your role involves collaboration with architects, engineers, and other stakeholders to ensure that the HVAC and plumbing systems are efficiently integrated into the overall building design. This is a full-time in-office position. Role & Responsibilities: Ensure accuracy and compliance with industry standards and project specifications. Ensure Seamless Integration of HVAC and Plumbing Systems. Must be familiar with building codes, standards and regulations related to HVAC and plumbing systems. Ability to take on and complete tasks independently and/or with a team. Timely resolution of design-related issues through effective communication. Stay Technologically Current with awareness and application of the latest developments in relevant software tools. Team player. Qualifications: Proficiency in using AutoCAD is required. 3+ years working in Architecture/Engineering/Construction field is preferred Preferred Software skills: AutoCAD, Bluebeam, MS Office365 & REVIT A growth mindset is essential. What we offer: We encourage a healthy work/life balance and are dedicated to cultivating an excellent work atmosphere for our team. Our benefits package includes generous vacation time, paid holidays, medical, dental, vision benefits, Annual bonus, 401(k) retirement plan with matching contributions. We promote a healthy work/life balance.  For consideration, please provide a cover letter that includes information on why you are interested in this position as well as a detailed resume. Please apply online with BMA Mechanical+ at: https://bmamechanical.hiringthing.com/job/877820/plumbing-drafter-specialist-junior-plumbing-designer?s=cl

H&H Construction Services is offering exciting career opportunities for Resident Engineers with a Professional Engineer License. We currently have multiple inspection projects for movable and fixed bridges in Northern, Central and Southern New Jersey. With over 138 years of experience, H&H is a trusted full-service infrastructure engineering firm. Our clients, including infrastructure owners, contractors, and colleagues, rely on us for intricate and innovative engineering solutions. They trust our time-tested ability to manage the entire life cycle of a project, from the study and planning phase through to design and construction. With over 600 talented employees located across 30 offices nationwide, H&H can efficiently and effectively handle assignments of all sizes, types, and delivery methods around the country and across the globe. Responsibilities Supervise on-site activities of the project Ensure compliance with specifications/ construction schedule and prepare progress reports Ensure optimal working of construction/ engineering personnel and maintain accurate field notes Review monthly contractor invoices for payment Organize and maintain all project shop drawings, RFIs, and other project documents Ensure contractor compliance with health and safety policies Requirements Minimum of five years of bridge/highway experience Working knowledge of bridge and highway construction methods, materials, standards, and specifications NICET, ACI, SAT and Traffic Control certifications (preferred) 10-hour OSHA safety training certification NJDOT and NJTA experience (preferred) Good writing and communication skills Benefits We offer a professional work environment, competitive salary, benefits package and 401(k). EOE M/F/DISABILITY/VETS

Established in 1989, BMA Mechanical+ is a company for problem solvers, innovators, and team players. We get excited about things like saving energy and water, designing with the latest and greatest, and helping our customers achieve their vision. Our mission is to develop, support, and shape the built environment with innovative, resilient, and sustainable solutions. We call it the California Standard.   What We Offer: We encourage a healthy work/life balance and are dedicated to cultivating an excellent work atmosphere for our team. BMA provides opportunities for paid continuing education and ongoing industry training.  Our benefits package includes generous vacation time, paid holidays, medical, dental, vision benefits, annual bonus, 401(k) retirement plan with matching contributions.  Position in Brief: Looking for a new challenge that combines your technical skills with real-world impact? If you’ve worked in HVAC, electrical, plumbing, controls, or construction, building commissioning could be an exciting way to expand your career. We’re looking for a Commissioning Agent who wants to apply their hands-on experience in a new way — helping buildings perform at their best for energy efficiency, comfort, and reliability. Your background in other fields gives you a unique perspective that makes you a great fit for this role. Role & Responsibilities: Prepare and compile all required commissioning documents and deliverables in step with project schedules.Responsible for creating all required Design Phase Commissioning Documents, Construction Phase Commissioning Documents, and providing Construction Phase Commissioning services. Deliver meaningful value to ensure building systems meet project goals, the project owner’s expectations & requirements, and function as intended by the project designers. Input and maintain current information in BMA’s project management database.  Coordinate with internal and external project teams to create all required documentation and ensure that it aligns with BMA’s contractual obligations prevailing code requirements. Read and interpret technical documents including Construction Documents, Shop Drawings, and Project Specifications.  Work in collaboration with project stakeholders, and architecture/engineering/construction professionals to document, observe, and report on the design, construction, and operation of building systems (lighting, HVAC, renewable energy systems, etc…).  Host and attend project meetings as needed. Qualifications: Certification as a Commissioning Agent/Provider (CxA, BCxA) preferred. Construction experience and familiarity with current building technologies/techniques preferred. Excellent time management and project prioritization. Software skills preferred: MS Office365, BlueRithm, Bluebeam Revu,  Growth mindset Technical degree, or other industry specific work experience demonstrating high level of technical capability preferred. Valid Driver's license & access to personal automobile for travel to project sites (company reimbursed mileage). A working knowledge of current codes/standards including California Mechanical Code, California Energy Code,  CALGreen Code, and ASHRAE Commissioning Standards. For consideration, please provide: - a cover letter that includes information on why you are interested in this position. - a detailed resume. BMA is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, disability, or other protected status. Please apply online with BMA Mechanical+ at: https://bmamechanical.hiringthing.com/job/949803/commissioning-agent-san-luis-obispo?s=cl