Browse
···
Log in / Register

Field Engineer - Energy and Infrastructure Solutions (EE24120)

Negotiable Salary

TMEIC Corporation Americas

Roanoke, VA, USA

Favourites
Share
Description

Job # EE24120 Job Title Field Engineer Office Location Roanoke, VA; TX, GA, OH, NC preferred Business Function/Department Energy & Infrastructure Solutions/Field Engineering Sales Territory, if applicable General Role Description Provide Technical Advisory Services (TAS) to coordinate installation and commissioning activities for assigned projects while meeting project schedules and performance criteria. Role Accountabilities - Commission AC and DC drive systems and/or control software to meet design performance criteria - Perform tune up of closed loop regulators to ensure optimal equipment performance and meet design parameters - Troubleshoot and correct process application problems in complex control systems - Design, configure, and test system software and hardware to meet contractual requirements when assigned - Gather pertinent information from authorized sources to assess project requirements as related to assigned scope of work - Provide regular, accurate, and considered commissioning status reports to parties deemed appropriate to the situation - Lead respective process component of client witness system acceptance test when assigned - Recommend changes to commissioning procedures to improve system performance - Recommend software or hardware improvements to engineering department - Maintain current safety qualifications appropriate to the assigned tasks and adhere to both Company and client safety requirements - Ensure proper safety equipment is available and in good working condition, as assigned - Coach associates in specific areas of technical expertise when identified by management as a function expert - Train client personnel on system maintenance procedures and/or system operation to ensure optimum performance and minimum downtime - Plan and execute special projects up to 9 months in duration to support the department when assigned General Employee Accountabilities - Bring full effort to bear on tasks assigned by manager - Give manager best advice - Give earliest notice when work cannot be delivered as specified - Cooperate and collaborate with peers and interact cross-organizationally as specified by manager - Exemplify Company Core Values: Integrity, Client Focus, Team Orientation, and Personal Commitment - Comply with all Company policies, practices, and procedures and all regulations and laws - Recommend viable improvements proactively - Ensure effective utilization of business tools and processes Requirements Minimum Qualifications - Bachelor’s degree in electrical engineering, mechanical engineering, mechatronics, or related field or equivalent via education and/or work experience - 2 years’ experience commissioning power distribution, power electronic, and rotating machine products - Demonstrated successful working relationships with clients, suppliers, and other internal and external contacts - Demonstrated successful and positive personal leadership, interpersonal, organizational, administrative, and communication skills - Demonstrated continuous improvement in areas of responsibility - Proficiency in MS Office, software programming language, and simulation tool - Availability to travel, domestically and internationally, approximately 75%, often with limited notice Preferred Qualifications - 5 years’ experience commissioning power distribution, power electronic, and rotating machine products - Demonstrated experience in the metals, material handling, paper, or general industries - Demonstrated knowledge and experience with TMEIC family of low and medium voltage motor drive controls, engineering tools, and product configuration tools - Demonstrated knowledge and experience with TMEIC engineering tools, and product configuration tools - Demonstrated experience working with international clients and field service personnel - Demonstrated experience in international field engineering - Demonstrated successful working relationships with a foreign parent or subsidiary companies Link to TMEIC Corporation Americas website: https://www.tmeic.com/. To be considered an applicant for any available positions, individuals must complete an online job application for each posting. A resume may be attached to the online application but is not considered a substitute for the information in the application. Applications will be considered only for the specific position for which the application is submitted. EEO/AA/M/F/Vet/Disability Employer

Source:  workable View Original Post
Location
Roanoke, VA, USA
Show Map
workable

You may also like

Workable
Wind Technician Nationwide
Neodesha, KS 66757, USA
We are searching for skilled and experienced Wind Technicians with solid experience working with major components who can conduct heavy rigging operations to facilitate replacement components. This role requires in-depth knowledge and hands-on experience in handling various types of maintenance and diagnosing issues to ensure optimal functionality of wind turbines. We are seeking experienced Wind Turbine Technicians with knowledge from a variety of platforms. In this position, you must be able to repair mechanical, hydraulic, and/or electrical component replacements. Troubleshoot and repair significant corrective operational issues on utility-sized wind turbines per the project description. Conduct heavy rigging operations to facilitate replacement components. Perform all large component exchanges in accordance with specified procedures. Perform repairs on mechanical, hydraulic, and/or electrical component replacements to correct malfunctions. Properly utilize and maintain all mandated safety equipment. Represent the company culture of safety, quality, and integrity daily. Comply with all safety rules in accordance with company, customer, and government regulations and guidelines. Exhibit positive, courteous behavior with customers, contractors, suppliers, and co-workers. Accurately complete and submit required service reports, timecards, expense reports, and other required company reports in a timely manner for the onsite team. Willingness to continually embrace personal and professional development. Schedule: 10 hour shift Holidays Monday to Friday Overtime Weekends as needed   Experience: Wind turbine maintenance: 2 years (Required) License/Certification: Driver's License (Required) No DUI’s allowed Willingness to travel: 100% (Required) Work Location: On the road Requirements Qualifications: Two years of experience doing large corrective work Fundamental electrical, hydraulic, and mechanical skills Ability to read and understand schematics by various wind turbine manufacturers Ability to climb 300 feet or more regularly Completion of all required training in a satisfactory manner and timeframe Ability to lead and participate in on-the-job training with on-site personnel Ability to work weekends, holidays, and overtime as needed Ability to Regularly work 50+ hours a week Basic computer skills Ability to travel for up to 6 weeks at a time Ability to lift 50+ pounds regularly Ability to work in inclement weather Education: High School Diploma OSHA 10 or OSHA 30, NFPA 70E, First Aid/CPR, and Tower Rescue certificates preferred Benefits Job Type: Full-time Pay: $28.00 - $37.00 per hour   Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Health insurance Life insurance Paid time off Referral program Retirement plan Tuition reimbursement Vision insurance
$28-37
Craigslist
Job Opportunity: Architectural Draftsperson Needed (Remote)
24929 Palmilla Dr, Calabasas, CA 91302, USA
Job Opportunity: Architectural Draftsperson Needed We are seeking a skilled Architectural Draftsperson who can transform architectural concepts into detailed, precise drawings. Position: Architectural Draftsperson Location: Remote Employment Type: Independent Contractor Salary: $25 per hour Key Responsibilities: * Create detailed architectural drawings and plans using CAD software * Collaborate with designers, architects, and project managers to ensure accuracy * Interpret design sketches and translate them into technical drawings * Ensure all drafts comply with industry standards and building codes Qualifications: * Proficiency in AutoCAD, Revit, and other drafting software * Strong understanding of architectural design principles * Excellent attention to detail and problem-solving skills Why Join Us? * Work on innovative and diverse projects * Supportive team environment * Opportunities for professional growth Interested candidates should submit their resume and portfolio.
$25/hour
Workable
Field Commissioning Technician - Warehouse Robotics & Automation
Atlanta, GA, USA
Exotec is at the forefront of technological excellence in order to redefine the relationship between humans and robots. Our solutions are contributing to the success of some of the largest brands in retail and e-Commerce by revolutionizing the way they fulfill their orders to the end consumers, all while mitigating labor constraints and increasing workplace safety. Through the unification of state-of-the-art software and high-performance hardware, our robotic solutions are now deployed across the globe and our exponential growth has led us to become the first industrial unicorn in France. Our Field Commissioning Technicians are on the boots on the ground bringing Exotec's warehousing robotic systems to life, working hands-on to ensure everything functions just as intended — safely, smoothly and reliably. Working at Exotec is an exciting opportunity to give purpose to your skills. Learn and grow with more than 1,000 ExoPeople (and counting!) around the world to help turn your ideas into a reality. The robotics revolution is just the beginning at Exotec. Will you be part of it? Responsibilities Execute pre-defined commissioning and verification tests of Exotec’s robotic systems and sub-assemblies on-site Conduct flow and performance testing to ensure system reliability, efficiency, and throughput Troubleshoot and report any issues affecting system function, safety, or performance Support engineering and other technical team members in fine-tuning, calibrations, and adjustments to align with operational specifications Collaborate with installation teams and assist in on-site setup when required Communicate status updates to internal and external stakeholders Document findings, share feedback with Deployment engineers, and contribute to system improvements Requirements We strongly encourage applications from candidates of all genders to help us build a truly inclusive environment. If you don’t meet every requirement listed below, don’t worry—your skills and experiences may still make you a great fit 1+ year of commissioning robotic systems and/or equipment, ideally in the industrial automation, materials handling, warehousing and/or logistics sectors Any post-high school studies or certification in mechatronics, robotics, mechanical or electrical engineering or a similar field of study would be a strong plus Flexibility with travel up to 100% of working hours, both domestic and international, to client sites across North America Broad knowledge on software, mechanical and electrical engineering with the ability to work on both mechanical troubleshooting and software configuration Able to use hand tools in a safe, effective and efficient manner General comfort in working regularly with computers and in software; any familiarity with corporate networking highly beneficial Ability to meet physical demands of job: occasional lifting up to 50 lbs, frequent standing & walking (our Field team members can average 15K steps per day!) and working on equipment overhead and at ground-level Benefits Competitive compensation package, inclusive of salary, annual bonus and financial incentives for travel Comprehensive medical, dental and vision coverage Generous vacation and time off policy 401(k) with company match up to 5% Eligibility to participate in Employee Share Program after 1 year of employment Continuous opportunities for training and development in a quickly growing, international company Company-hosted teambuilding and social events To apply, please submit your résumé. Only shortlisted candidates will be contacted for the next steps in the hiring process. We look forward to receiving your application! Exotec is an equal opportunity employer and all applicants will be considered without regard to race, religion, color, sex, gender, sexual orientation, pregnancy, age, national origin, ancestry, physical or mental disability, medical condition, military or veteran status, genetic information, marital status, ethnicity, or any other protected classification, in accordance with applicable federal, state, and local laws. We provide an inclusive work environment that respects all differences.
Negotiable Salary
Craigslist
Solidworks/Auto CAD Designer/Drafter
27315 Ardella Pl, Santa Clarita, CA 91350, USA
Admiral Refrigeration Inc. is looking for a skilled Solidworks/Auto CAD Designer/Drafter to join our team. The primary focus is to create 2D and 3D models, assemblies, and drawings based on project requirements, specifications, and design guidelines for commercial refrigeration systems. We work in the food service industry space, such as Walk-In Boxes, Ice Machines, and Refrigeration Rack Systems. Admiral Refrigeration Inc is a manufacturer of remote refrigeration rack equipment, both air-cooled and water-cooled. Responsibilities: • Utilize SolidWorks/Auto CAD software to create 2D and 3D models, assemblies, and drawings based on project requirements, specifications, and design guidelines. • Develop and modify designs, ensuring accuracy, functionality, and adherence to industry standards. • Generate detailed technical drawings, including dimensions, tolerances, and materials, for use in manufacturing and production processes. • Participate in design reviews and provide valuable insights to improve designs and resolve challenges. • Perform detailed checks on designs, models, and drawings to maintain accuracy, consistency. • Identify and rectify discrepancies or errors in designs to ensure high-quality deliverables. \ • Manage multiple design projects concurrently, prioritize tasks, and meet project deadlines. • Communicate progress, updates, and potential roadblocks to project managers and team members. Qualifications: • Strong SolidWorks/Auto CAD software knowledge. • Strong understanding of engineering principles, manufacturing processes, and materials selection. • Experience in drafting and creating technical drawings with precision and accuracy. • Excellent problem-solving skills and the ability to think critically about design challenges. • Effective communication skills to collaborate with team members. • Detail-oriented mindset with a keen eye for identifying design inconsistencies and errors. • Prior experience in product design, engineering, or a related field is a plus. • Knowledge of other CAD software and tools is beneficial. Education Strong SolidWorks/Auto CAD software knowledge Compensation • Job Type: Full-time $26 to $30 per hour (Based on Experience) Benefits: • Dental insurance • Health insurance • Paid time off • Vision insurance Schedule: • 8 hour shift • Overtime Work Location: Contact: Roz Biles E: roz@admiralrefco.com M: 714-728-2033 Julia Nichols E: julia@admiralrefco.com O: 661-505-7913
$26-30/hour
Workable
Wind Turbine Technician
Neodesha, KS 66757, USA
To perform the job successfully, the individual must be able to perform each essential duty satisfactorily. Other duties may be assigned. Desired Skills, Experience & Requirements Troubleshoot and repair problems on variable speed/variable pitch wind turbines Perform all mechanical and electrical component maintenance, and repair and replace components as required Electrical, hydraulic and mechanical fundamental skills Climb 300 feet or more on a regular basis Complete required paperwork (e.g., service reports, time cards, expense reports, etc.) Exhibit positive, courteous behavior with customers, businesses and co-workers Read and understand electrical and hydraulic schematics Use all mandated safety equipment and comply with all safety requirements, in accordance with company and government regulations and guidelines Complete all required training in a satisfactory manner and timeframe Participate in on-the-job training with on-site personnel Work weekends, holidays and overtime, as needed Regularly work 50+ hours a week Assist in the training and development of lower-level operation and maintenance personnel Basic computer skills Ability to travel for up to 6 weeks at a time Ability to lift 50+ pounds on a regular basis, and work in inclement weather OSHA 10 or OSHA 30, NFPA 70E, First Aid/CPR, and tower rescue certificates preferred Must have a valid driver’s license and a clean driving record Willingness to continually embrace personal and professional development
Negotiable Salary
Craigslist
Solidworks/Auto CAD Designer/Drafter
23845 McBean Pkwy, Valencia, CA 91355, USA
Admiral Refrigeration Inc. is looking for a skilled Solidworks/Auto CAD Designer/Drafter to join our team. The primary focus is to create 2D and 3D models, assemblies, and drawings based on project requirements, specifications, and design guidelines for commercial refrigeration systems. We work in the food service industry space, such as Walk-In Boxes, Ice Machines, and Refrigeration Rack Systems. Admiral Refrigeration Inc is a manufacturer of remote refrigeration rack equipment, both air-cooled and water-cooled. Responsibilities: • Utilize SolidWorks/Auto CAD software to create 2D and 3D models, assemblies, and drawings based on project requirements, specifications, and design guidelines. • Develop and modify designs, ensuring accuracy, functionality, and adherence to industry standards. • Generate detailed technical drawings, including dimensions, tolerances, and materials, for use in manufacturing and production processes. • Participate in design reviews and provide valuable insights to improve designs and resolve challenges. • Perform detailed checks on designs, models, and drawings to maintain accuracy, consistency. • Identify and rectify discrepancies or errors in designs to ensure high-quality deliverables. \ • Manage multiple design projects concurrently, prioritize tasks, and meet project deadlines. • Communicate progress, updates, and potential roadblocks to project managers and team members. Qualifications: • Strong SolidWorks/Auto CAD software knowledge. • Strong understanding of engineering principles, manufacturing processes, and materials selection. • Experience in drafting and creating technical drawings with precision and accuracy. • Excellent problem-solving skills and the ability to think critically about design challenges. • Effective communication skills to collaborate with team members. • Detail-oriented mindset with a keen eye for identifying design inconsistencies and errors. • Prior experience in product design, engineering, or a related field is a plus. • Knowledge of other CAD software and tools is beneficial. Education Strong SolidWorks/Auto CAD software knowledge Compensation • Job Type: Full-time $26 to $30 per hour (Based on Experience) Benefits: • Dental insurance • Health insurance • Paid time off • Vision insurance Schedule: • 8 hour shift • Overtime Contact: Roz Biles E: roz@admiralrefco.com M: 714-728-2033 Julia Nichols E: julia@admiralrefco.com O: 661-505-7913
$26-30/hour
About Us
Terms of Use
Privacy Policy
Help
Contact Us
FAQ
Cookie
Cookie Policy
Cookie Settings
Our Apps
Download
Download on the
APP Store
Download
Get it on
Google Play
© 2025 Servanan International Pte. Ltd.