1966 Chevy C10 Pickup - $1,950 (Castle Rock)

I have a 66 Chevy C10 was originally a long bed and the frame was cut down to a short bed and boxed on the under the cab. The front end is updated to a 76 c10 5 lug power disc brakes and power steering, with a 88 suburban 3.42 10 bolt rear diff. The Truck has minimal rust for what it is but still needs work, and I have all the parts that came off the truck to start with. The engine in the pictures will be removed soon cause its junk. The cab was dipped in Eugene Oregon back in 2019 and the outside was epoxy primed right after i got it back. I didn't prime everything due to planning on the rust repair but started my business right after and the project ended up sitting. the cab need normal toe board floor repair, rockers and there are pinholes in the cab corners. The windshield has a couple of dime size or less holes in the channel and a couple of pin holes on the inside around the windsheild that could be brazed up. the Back of the cab has a cut out behind the seat but i have a back window section to cut what is needed out to repair that. All the under side bracing is solid and the doors need the typical bottons repaired. The Bed sides are still 8 foot and need cutting down but they are rust free. i have a solid tailgate and good front panel for the bed as well as all the braces and 2 sets of fender wells. The frame , inner fenders, 1 pair of doors were sand blasted back in 2019. Front to under the cab of the frame was painted just never finished the back section. Clean Title in hand and the frame and vin tag match the title. $1950 obo No Trades, I'm funding a new project truck. The 6 lug axle in the picture is a factory 12 bolt 3.73 posi already sold.