Direct Hire Automatic Press Operator – Carol Stream, IL-$27-$29/hour (carol stream)

MACHINE OPERATOR COLLATION - 1st SHIFT Giesecke+Devrient is a growing, German international security technology company operating in the fields of digital security, financial platforms, and currency technology. Our Mega Site located in Bolingbrook Illinois is a state-of-the art, clean, air-conditioned facility running three shifts. Job Summary: G+D has an outstanding opportunity for a Machine Operator in our Finishing Department at our Bolingbrook plant on 1st shift working Monday through Friday 5:30am-1:30pm with required overtime during our peak season. We are looking for a positive and experienced worker looking for a long-term position that enjoys physical work, guiding staff, and ensuring results. The successful candidate will also enjoy taking on new duties as the role progresses. Duties & Essential Job Functions: Prepare, supply, and operate the machine during the production process and monitor relevant stages to ensure that products are manufactured according to established parameters. Understand and execute the entire range of machine functions and operating sequences. Load materials onto machines in the required order and sequence. Read job specifications and previous run data (if available) to set machine parameters and material requirements. Prior to performing maintenance on the machine, ensure proper Lockout/Tag-out procedures have been followed. Meet or exceed job standards for line speeds, scrap rates, and setup times. Load and unload stock efficiently and safely. Maintain department inventory and supplies, ensuring everything is accounted for. Report any maintenance needs to the Maintenance Department promptly. Collaborate with the Quality Assurance department to ensure product specifications are met. Complete all required documentation and data entry accurately and in a timely manner. Verify material conformance to specifications using measuring devices such as micrometers, tape measures and calipers. Maintain cleanliness of the work area and equipment, ensuring a safe and organized workspace. Verify that guards at pinch points and potential burn areas are present before operating the machine. Conduct thorough inspections to ensure the highest quality standards. Adhere to Good Manufacturing Practices (GMP) policies and procedures, taking immediate action to correct safety and security issues. Ensure the operation of equipment by completing preventative maintenance requirements, following manufacturer's instructions, and troubleshooting malfunctions when necessary. Required Skills & Qualifications: High School diploma or GED preferred. Minimum of 6 months of experience operating production machines in a manufacturing environment. Willingness to work overtime as needed. Requires eyesight correctable to 20/20 and normal color perception. Strong verbal and written communication in English. Ability to focus and perform precision hand movements when operating machinery. Must be able to regularly lift 50 pounds and work safely around machinery. Strong problem-solving skills related to machine setup and operation. The pay for this position starts at $16 per hour and is eligible for an annual bonus. Benefits offered to eligible employees include; medical (PPO & HDHP with HSA), dental, vision, paid time off, paid holidays, 401k with employer match, short / long term disability, life insurance, healthcare and dependent care flexible spending, EAP, commuter benefits, education assistance, pet insurance, legal and more.

Ampco Tubes is looking for people with a willingness to learn to join our production team in our fabrication facility. We are a manufacturing company specializing in mandrel tube bending for a variety of industries. Standard hours are Monday through Friday 6:00 am to 2:30 pm Job duties include the ability to work with fellow employees in a manufacturing environment using manual and automated equipment to accomplish the following: Sawing, bending, beading, welding, powder coating and other various processes. We are a fast-paced environment that requires a team player with a great work ethic. Come join our team and we'll be successful together. Job Requirements: 1 year of manufacturing experience (preferred in metal fabrication) A willingness to learn the trade and our industry. You must be available to work 40 hours per week and be actively engaged during work hours You must be able to communicate if you are not able to report for work You must be willing to work in a production environment, and meet efficiency standards after training The ability to regularly lift up to 50 pounds Proficient with a tape measure, calipers and other measuring devices. The ability to read and follow written instructions on production plan documents. The ability to work in a non-temperature-controlled environment. The ability to communicate effectively with co-workers and supervisors. The ability to read and understand manufacturing plans and prints or a willingness to learn. The ability to use a Windows based computer software for time keeping purposes. Must be willing to submit to a background check, pre-employment drug test. We are more interested in your future than your past. Wage: $20.50 starting wage, $21.50 per hour after 6 months. How to apply: Submit resume by email, or apply directly Monday through Friday, 7:00 am to 3:30 pm. 1532 SE 3rd. Avenue Portland, OR 97214 We offer a full benefits package that includes: medical, dental, vision & life insurance. We also offer paid vacation, paid sick time, paid holidays, as well as a 401(k) with a company match. American Metal Products Co. is an equal opportunity employer. We do not discriminate in employment opportunities or practices on the basis of race, color, religion, sex (including pregnancy), sexual orientation, national origin, age, disability, marital or veteran status, genetic information, uniformed service, or any other classification protected by law.

Ampco Tubes is looking to add to our Shipping & Receiving Department. We are a manufacturing company specializing in mandrel tube bending for a variety of industries. This is a full-time day shift position. Standard hours are Monday through Friday 6:00 am to 2:30 pm We are a fast-paced environment that requires a team player with a great work ethic. Come join our team and we'll be successful together. Position Responsibilities  Packing goods in shipping containers, handle mailing labels and shipping documents.  Ensure all orders have been filled with correct parts and quantity.  Count and inspect all incoming products and file paperwork.  Communicate with production and administrative staff.  Operate forklift to load product in trucks and unload tube and pipe.  Provide general support to visitors.  Participate in proactive team efforts to achieve departmental and company goals.  General housekeeping of work area.  Perform routine duties with minimal supervision after training.  Perform other duties as assigned, including operating manufacturing equipment. Position Requirements: A willingness to learn the trade and embrace on the job training. You must have a valid driver license. You must be available to work 40 hours per week, arrive on time and be actively engaged. You must be able to communicate if you are not able to report for work. The ability to regularly lift up to 50 pounds. Proficient with a tape measure, calipers and other measuring devices. The ability to read and follow written instructions on production plan documents. The ability to work in a non-temperature-controlled environment. The ability to communicate effectively with co-workers and supervisors. The ability to read and understand manufacturing plans and prints or a willingness to learn. The ability to use a Windows based computer software for time keeping purposes. Must be willing to submit to a background check, pre-employment drug test. We are more interested in your future than your past. Wage: $20.50 starting wage, $21.50 per hour after 6 months (520 hours). How to apply: Submit resume by email, or apply directly Monday through Friday, 7:00 am to 2:30 pm at 1532 SE 3rd. Avenue Portland, OR 97214 We offer a full benefits package that includes medical, dental, vision & life insurance. We also offer paid vacation, paid sick time, paid holidays, as well as a 401(k) with a company match. American Metal Products Co. is an equal opportunity employer. We do not discriminate in employment opportunities or practices on the basis of race, color, religion, sex (including pregnancy), sexual orientation, national origin, age, disability, marital or veteran status, genetic information, uniformed service, or any other classification protected by law.

INDUSTRIAL MAINTENANCE TECHNICIAN - 1ST & 3RD SHIFTS AVAILABLE $3000 SIGN ON BONUS! Giesecke+Devrient is a growing, German international security technology company operating in the fields of digital security, financial platforms, and currency technology. Our Mega Site located in Bolingbrook Illinois is a state-of-the art, clean, air conditioned facility running three shifts. Job Summary: Perform scheduled and unscheduled maintenance on all card personalization and fulfillment equipment. Perform scheduled and unscheduled maintenance on all factory support equipment. This position will report to the Maintenance Manager. First shift runs from 5:30 am - 1:30 pm and third shift runs 11 pm -7 am Monday through Friday. Job Responsibilities: Troubleshoot and repair all card personalization and fulfillment equipment. Troubleshooting: Diagnose malfunctions in electronic equipment, perform tests, and follow technical manuals to ensure proper functioning. Fabricate replacement parts when necessary. Perform preventative maintenance on all card personalization / fulfillment equipment and support equipment. Work with machine operator to identify and resolve issues with setup and job files. Work with IT to identify and resolve machine communications related issues. Implement programs to increase OEE. Utilize KPI's to improve equipment uptime and decrease downtime. Documentation: Maintain detailed logs of repairs, tests and inspections, and document processes for future reference. Demonstrate a strong working knowledge of process controls. Job Specifications: Must physically be able to bend, stretch, and stoop, but not limited to only these physical activities. Requires lifting of 40 lbs. or more without aid. Requires normal hand, eye and walking coordination. Must be able to work overtime and weekends as needed. Education & Experience: High school diploma or GED equivalent required. Completion of Electro/Mechanical Course from a recognized Technical Institute is preferred. 3-5 years of experience in general maintenance (multimeters, soldering stations, precision screwdrivers, rotary tools). Required Skills & Knowledge: Requires a strong working knowledge of electronics and pneumatic systems. Must possess the ability to read and understand electrical/pneumatic schematics. Must possess the ability to diagnose and repair electrical, mechanical, and pneumatic systems. Must possess an excellent knowledge of basic hand tools. Must possess strong mathematics and computer skills. The pay for this position starts at $28 per hour and is eligible for an annual bonus. Benefits offered to eligible employees include; medical (PPO & HDHP with HSA), dental, vision, paid time off, paid holidays, 401K w/employer match, short/long term disability, life insurance, healthcare and dependent care flexible spending, EAP, commuter benefits, education assistance, pet insurance, legal, and more.

THIS IS NOT YOUR ORDINARY PRODUCTION JOB! HOT, NOISY, TOUGH, TEAMWORK. LEARN TO WORK WITH MOLTEN GLASS: IT WILL DAZZLE YOUR FRIENDS AND TERRIFY YOUR ENEMIES! Join a 50-year legacy of supplying the world with art glass that appears in museums, cathedrals, parks, courthouses, hospitals—even the US Capitol Dome. Locally owned and operated since 1974, Bullseye Glass Co. is a growing company that has always worked shoulder-to-shoulder with artists and architects, uniting creativity and industry, inspiration and perspiration, nationwide and worldwide. Bullseye is seeking a full-time Graveyard Glass Melter. Prefer experience in an industrial environment, line cook experience helpful, ability to lift 50-80 lbs on a regular basis and interest in glass helpful. Requires ability to follow verbal and written instructions, attention to detail, and self-motivation a MUST! Job entails working near hot furnaces/molten glass. Schedule: Sunday - Thursday, 10:00pm - 6:30am. Please fill out application here: https://www.bullseyeglass.com/application-for-employment/ or email resume with "GM" on the Subject line. Check us out at: www.bullseyeglass.com or get a tour at: https://www.youtube.com/watch?v=7XNQHh7zOjw

Mechanical Assembler Little previous experience in manufacturing is required. You can do this job if you have strong general mechanical skills and a desire to learn! Our client is locally owned and operated. Established in 1949, it has grown into a regional and national industrial equipment supplier, providing a combination of value added technical services, engineering, consultation, and quality products to a variety of markets. They provide mission-critical equipment to a wide variety of industries including Fortune 500 companies. PRIMARY DUTIES: Assemble and test large industrial products from bare parts, in "job shop" and production environment. This includes mechanical connections, supports and structures, and control panels. Build custom air compressor, vacuum pump, blower, and pump assembly packages. DESIRED QUALIFICATIONS: • Some experience to build and disassemble an engine or machine • Electronic Panel Assembly experience preferred but not required • Read & interpret assembly drawings • Mechanical skills • Physically able (lifting of 50 lbs occasionally) • Work well independently/self-starter and with a team DUTIES AND RESPONSIBILITIES: Such duties include, but are not limited to: • Assemble mechanical assemblies; such as air ends, blowers, and other compressed air system components, working on a shop floor. • Inspects components for proper assembly, specifications, fit and finish. • Plans assembly and positions components according to the knowledge of unit being assembled and through the interpretation of engineering drawings, layout drawings or electrical schematics. • Remove small quantities of metal with hand files, scrapers or machine tools to produce close fit between parts. • Bend and install tubing and fittings for oil lubrication/cooling systems. • Align couplings and subassemblies to the gearbox or other components. • Operate drill presses, milling machines, lathes, hydraulic presses, welders and other shop equipment to assist in assembly operations. • Test completed assemblies for proper operation, temperature, vibration and noise levels and complete required written reports. Troubleshoot, repair or replace faulty components. • Provide feedback in regards to design improvements, updates, and procedures, verbally and in writing, as required. • Work in conjunction with Floor Supervisor to ensure assemblies meet design parameters. • Perform workstation and shop clean-up duties as assigned. EDUCATION, EXPERIENCE, SKILLS, AND KNOWLEDGE Qualifications and Requirements: • Education: High School diploma or GED preferred, but not required. • Specialized training: mechanics, electrical • Previous experience is desired but not required. It should include mechanical assembly and disassembly. Desired Skills • The ability to learn to read and use handheld mechanical measurement devices (micrometer, dial indicator, caliper) as well as electrical measurement devices (Fluke meter). • Recognize common mechanical and electrical components • Passion for auto mechanics, building and/or tinkering with mechanical components • Excellent communication skills • Must work well with others in a safe and self-directed manner • Reading: Read and interpret the following documents: operating and maintenance manuals, employee manuals, safety guidelines, electrical schematics, blueprints, mechanical sketches, and electrical and mechanical reference charts. Day Shift: 5:00 am to 1:30 pm **Not public transportation accessible** Pay rate: $21.00/hr to start! Email us at portlandwest@pridestaff.com Or Call Today to Apply! 971.371.4028 And Walk-ins are welcome Monday to Friday from 9:00 am to 3:30 pm. 12600 SW Crescent Street Beaverton, OR 97005 PrideStaff Portland is a locally owned and operated Staffing Agency. PrideStaff is a winner of the coveted "Best of Staffing" Diamond award for 15 consecutive years for the highest level of satisfaction as rated by our valued Employees and Clients. Over the years, PrideStaff has been a consistent industry leader, developing technology and service processes that allow our organization to deliver superior performance. When it comes to your success, we leave nothing to chance. Let us support your job and career search and see the difference PrideStaff can make!