CNC Machinist II- 2nd Shift

Mount This Fish Company is looking for a highly motivated individual to fill the last open position and join our team at entry level to assist our production staff with assembly of our fish replicas. Mount This Fish Company replicas are life lasting memories for avid anglers and wall decor displayed throughout the world. Primary tasks: -- Glassing Molds -- Assembling Blanks -- Cutting Blanks Occasional Additional tasks: -- Prepping Blanks For Paint -- Assisting Senior Staff On Misc Production Tasks Starting rate is $16/hr with a 30 day evaluation period. Raise is possible at the 90 day review dependent on ability to comprehend and complete our process and techniques. Most employees are up to $17/hr at the 90 day mark. We do have an incentive program that rewards the team for high performance increasing hourly rate by up to $3/hr. Employees may be eligible after 90 days. Hand eye coordination is necessary for pneumatic tool use. Knowing your fish specie is not required but is highly preferred. Medical Insurance 50% copay available after 6 months. PTO available after 1 year. This position will require you to wear a ventilation mask at times. Please message with questions or resume if interested. This is a Fiberglass Manufacturing Company. If you have sensitive skin, can't handle the heat or are extremely sensitive to a fast paced environment please do not apply. Position is available to begin immediately at part time (30 hours) and work into full time as techniques and processes are learned. This normally takes about 2 weeks to transition into full time. No Recruiters Please

Harco Fittings is a member of the IPEX group of companies. Our mission is to compete and grow using innovation, differentiation and extraordinary service. Harco Fittings LLC, founded in 1966 in Lynchburg, Virginia is a producer of gasketed joint injection-molded PVC and push-on gasketed joint ductile fittings. Our Harco locations span across seven states in the US and we are looking for new individuals to come be a part of a dynamic and growing team today! We currently have an exciting opportunity as a Fabricator. This role is based in our facility in Janesville, WI and reports to the Plant Manager. The hours are Mo-Fri from 5.30am until 2pm. The starting wage is $21.71 per hour.   Do not miss the opportunity to join a diverse group of people-centric professionals, thought leaders and rapid thinkers, entrepreneurs in spirit and status quo-fighters!   Job Summary Responsible for receiving, inspecting, and preparing parts for fabrication operations. Perform fabrication, assembly, and packaging operations. Principal Responsibilities Fabricate fittings to customer specifications using customized fabricating equipment, hand, power tools, adhesives, and fixtures. Obtain components from stock/production. Set-up equipment to match product requirements. Must be able to work in a team-oriented environment and demonstrate good communication skills. Inspect completed parts. Prepare parts for shipping by placing them in boxes or on pallets. Correctly label all parts and boxes as needed. Visually inspect all incoming pipes, components, and gaskets for defects. Apply 5S and Lean Manufacturing principles. Maintains a safe working environment by following Health, Safety and Environmental Policies and attending training that is provided where required. Maintains a respectful working environment by following Human Resource Policies and attending mandatory training when required. Assist in the coordination, preparation, and execution of year-end inventory. Completing and maintaining reports for managers as required, which may include: Production reports Scrap reports Other duties may be assigned when applicable. Requirements Previous experience in a manufacturing environment is strongly preferred, however, full training will be provided Must be knowledgeable in basic math Detail oriented with excellent analytical and problem-solving skills Must be a self-starter with good interpersonal and verbal communication skills coupled with an eagerness to learn Good team player including with a demonstrated ability to chip in to and foster a positive team environment Working knowledge of Health and Safety practices is helpful. After training, should exhibit an understanding of various types and sizes of pipes. Working Conditions Manufacturing plant environment Requires good mobility and involves considerable routine walking, standing for long periods, bending, and heavy lifting of 50 - 75 lbs. The use of hand tools including heat forming, pulling, belling, caps, reducer, saws, gluing Fast-paced environment where a considerable amount of sensory attention is required Benefits 401K plan with company match Comprehensive Health, Dental, and Vision coverage options Vacation and holidays Set schedule with bi-weekly pay Basic safety equipment (i.e. safety glasses, ear plugs) will be provided Reimburse COBRA costs while transitioning to IPEX benefits   IPEX is committed to providing accommodations for people with disabilities throughout the recruitment process and, upon request, will work with qualified job applicants to provide suitable accommodation in a manner that takes into account the applicant’s accessibility needs due to disability. Accommodation requests are available to candidates taking part in all aspects of the selection process for IPEX jobs. To request an accommodation, please contact HR at HR@ipexna.com. EOE.

Mount This Fish Company is looking for a highly motivated individual to fill the last open position and join our team at entry level to assist our production staff with assembly of our fish replicas. Mount This Fish Company replicas are life lasting memories for avid anglers and wall decor displayed throughout the world. Primary tasks: -- Glassing Molds -- Assembling Blanks -- Cutting Blanks Occasional Additional tasks: -- Prepping Blanks For Paint -- Assisting Senior Staff On Misc Production Tasks Starting rate is $16/hr with a 30 day evaluation period. Raise is possible at the 90 day review dependent on ability to comprehend and complete our process and techniques. Most employees are up to $17/hr at the 90 day mark. We do have an incentive program that rewards the team for high performance increasing hourly rate by up to $3/hr. Employees may be eligible after 90 days. Hand eye coordination is necessary for pneumatic tool use. Knowing your fish specie is not required but is highly preferred. Medical Insurance 50% copay available after 6 months. PTO available after 1 year. This position will require you to wear a ventilation mask at times. Please message with questions or resume if interested. This is a Fiberglass Manufacturing Company. If you have sensitive skin, can't handle the heat or are extremely sensitive to a fast paced environment please do not apply. Position is available to begin immediately at part time (30 hours) and work into full time as techniques and processes are learned. This normally takes about 2 weeks to transition into full time. No Recruiters Please

Resource Management Concepts, Inc. (RMC) provides high-quality, professional services to government and commercial sectors. Our mission is to deliver exceptional management and technology solutions supporting the protection and preservation of the people and environment of the United States of America. RMC is hiring for a Junior Inventory Management Specialist to support our customer onsite at NSWC Indian Head, MD.   The selected candidate will be expected to: Perform a wide range of substantive clerical/technical support work. Perform inventory accounting and control records entry and review, demand processing, requisition and re-supply, receipt and release of property, shipments, and management information recoverability. Perform periodic inventories of plant property, materials, and equipment. Gather information to support inventory records, discrepancies, and assist with corrective actions. Process disposal documentation as required, and post status record changes to maintain control of equipment dispositions. Process material receipts; enter data in the inventory control system; enter receiving and shipping documentation; and notify management of discrepancies with maximum supervision. Follow technical written procedures issued by the Federal Government for requisitioning, receiving, and storing supplies, repair parts, and equipment. Requirements A High School Diploma and (2-3) years of general work experience is required. An active DoD Secret clearance is required to start. The applicant selected may be subject to a security investigation and must meet eligibility requirements for access to classified information. Must have working knowledge of Microsoft Office Suite. Must be able to follow technical written procedures issued by the Federal Government. Must maintain a valid state-issued driver's license and be able to drive and operate a vehicle (car, truck, van). Must be able to lift up to 50 lbs. Benefits At RMC, we're committed to your career growth! RMC differentiates itself from other firms through its investment in our employees. We invest our resources to train, certify, educate, and build our employees. RMC can offer you a great place to work with a small company feel and give you the experience, tuition assistance, and certifications that will take your career to the next level. This also includes a competitive paid vacation package with 11 paid federal holidays. Additionally, we also offer high-quality, low-deductible healthcare plans, pet insurance, and a competitive 401K package. Salary at RMC is determined by various factors, including but not limited to location, a candidate's specific combination of education, knowledge, skills, competencies, and experience, as well as contract-specific requirements. The current salary range for this position will be $41,000 to $48,000 (annually). #LI-MB1

Mount This Fish Company is looking for a highly motivated individual to fill the last open position and join our team at entry level to assist our production staff with assembly of our fish replicas. Mount This Fish Company replicas are life lasting memories for avid anglers and wall decor displayed throughout the world. Primary tasks: -- Glassing Molds -- Assembling Blanks -- Cutting Blanks Occasional Additional tasks: -- Prepping Blanks For Paint -- Assisting Senior Staff On Misc Production Tasks Starting rate is $16/hr with a 30 day evaluation period. Raise is possible at the 90 day review dependent on ability to comprehend and complete our process and techniques. Most employees are up to $17/hr at the 90 day mark. We do have an incentive program that rewards the team for high performance increasing hourly rate by up to $3/hr. Employees may be eligible after 90 days. Hand eye coordination is necessary for pneumatic tool use. Knowing your fish specie is not required but is highly preferred. Medical Insurance 50% copay available after 6 months. PTO available after 1 year. This position will require you to wear a ventilation mask at times. Please message with questions or resume if interested. This is a Fiberglass Manufacturing Company. If you have sensitive skin, can't handle the heat or are extremely sensitive to a fast paced environment please do not apply. Position is available to begin immediately at part time (30 hours) and work into full time as techniques and processes are learned. This normally takes about 2 weeks to transition into full time. No Recruiters Please

Umbra is an American space technology company delivering advanced systems, from sensors to spacecraft, that empower customers worldwide with unmatched access to critical information from space. Our mission is simple and ambitious: redefine space—for people, systems, and missions in every domain. Umbra’s ecosystem operates through three business units: Remote Sensing (the data), Space Systems (the components), and Mission Solutions (the platforms).Together, our teams develop capabilities that deliver persistent access, resilient performance, and mission-ready solutions, advancing U.S. space leadership while keeping the world safe and informed. About the Team Space Systems – The Components Space Systems is where Umbra turns hardware and software designs into on-orbit realities; developing, implementing and iterating mission-ready core technology, while simultaneously advancing the next generation of our own satellite constellation. Space Systems is vertically integrated across the satellite architecture, thus the team designs, builds, and tests an array of critical components and subsystems, including power systems, communications, control systems, deployment hardware, avionics, and payloads, as well as the flight software, firmware and digital design solutions to support the entire hardware stack. Our focus is on first principles engineering, and our mandate is simple: it has to work when it counts. Every bolt, board, and binary is proven on our own SAR constellation, ensuring flight-proven reliability where failure is not an option. If you want to work on cutting edge space technology while maintaining the highest standard for innovation and mission ready performance, you belong here at Umbra. About the Job Join Umbra's Manufacturing team as a Spacecraft Aerospace Technician and play a crucial role in building the satellites we launch every year. In this position, you will be hands-on in the assembly and testing of our advanced spacecraft systems. Your expertise will not only contribute to the successful construction of satellites but also help streamline and enhance our manufacturing processes across multiple builds. If you're passionate about aerospace technology and eager to make an impact, we want to hear from you! This position is based on-site in our Santa Barbara, CA office. Key Responsibilities: Support assembly and test on a variety of spacecraft manufacturing tasks. Contribute to maintaining and improving manufacturing and test infrastructure. Communicate and work with engineers to develop and document test procedures. Maintains manufacturing documentation and reports (assembly procedures and test reports). Assist in the design and fabrication of test fixtures. Requirements Required Qualifications: High school diploma or equivalency certificate. 8+ years of experience working in an aerospace, manufacturing, military or automotive environment. Ability to read and interpret electrical schematics and mechanical drawings. Familiarity with mechanical measuring equipment such as; torque wrenches, fixtures, tooling, gages, calipers and other measuring devices. Ability to manipulate equipment weighting up to 50 pounds. Comfortable working in a dynamic and fast-paced development environment. Strong computer skillset, including Microsoft Office navigation and file manipulation. Manual dexterity with the ability to handle and assemble small parts. Ability to work paid over-time as necessary to complete the mission. Desired Qualifications: 15+ years of experience in assembly of complex mechanical / electrical systems with preference to small team / startup environments. Experience working with delicate spacecraft hardware, especially wire harnessing and moving mechanical assemblies. Strong interpersonal and verbal communication skills. Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment. Ability to take project goals inputs and works towards that end-goal beyond individual task assignment. Certification in engineering disciplines. Benefits 15 Days of PTO Accrual, Sick, Family & Medical Leave Medical, Dental, Vision, Life, LTD, STD (employer funded) Vol Life, Critical Illness, Accidental, Hospital Indemnity, Pet Insurance (employee funded) 401k with 3% non-elective company contribution Stock Options Free parking Free lunch in office daily Umbra is an Equal Opportunity Employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by federal, state, or local law. Employment Eligibility Verification In compliance with federal laws, all hired persons will be required to verify their identity and eligibility to work in the United States by completing the required Employment Eligibility Verification Form (I-9 Form) upon hire. ITAR/EAR Requirements This position may include access to technology and/or data that is subject to U.S. export controls pursuant to ITAR and EAR. To comply with federal export controls, all persons hired must be a U.S. citizen, U.S. national, U.S. lawful permanent resident, refugee or asylee as defined by 8 U.S.C. § 1324b(a)(3), or must otherwise be eligible to obtain the required authorizations from the U.S. Department of State and/or U.S. Department of Commerce as applicable.  Pay Transparency This job posting may cover multiple career levels. To ensure greater transparency, we provide base salary ranges for all roles, regardless of location. Our standard pay ranges are based on the role’s function and level, benchmarked against similar growth-stage companies. Compensation may vary based on geographical location, as certain regions may have different cost-of-living factors. The final offer will also be influenced by the candidate's skills, responsibilities, and relevant experience. Compensation Range The Compensation Range for this role is $52.88/hour - $62.50/hour DOE.