HeavyEquipment Operators. Dozer/Backhoe/ShootingGrade Tally/Quincy Mkt (Quincy, FL)

Our client, The University of San Francisco (USF) is looking to fill a temporary Journey Level Gardener position. The University of San Francisco is currently seeking a highly motivated, knowledgeable, and experienced gardener to assist with the ongoing creation of a safe, engaging, environmentally responsible, and beautiful outdoor campus. This position will be on-site, full-time from 7:00 AM-3:30PM. Please review full job description and apply through our Career Portal: https://jobs.crelate.com/portal/hroptionsinc/job/ubdrdrr1mg6xorrxdsi1tt9exc?crt=1759792738173  A temporary position is an excellent opportunity to gain industry experience or get your foot in the door with an employer. It’s a great way to network, pick up new skills and expand your resume. Come work for us! We offer competitive pay, as well as SF Health and Sick benefits and 401(k) upon meeting the eligibility requirements. Responsibilities: General grounds-keeping maintenance to lawns, shrubs, trees, bedding plants, hardscape exterior surfaces, and playing fields (natural and synthetic) including but not limited to mowing, pruning, dead-heading, litter abatement, and weeding Responsible and safe application of fertilizers, pesticides, and herbicides, including maintaining appropriate education levels and certifications as necessary or required Use, care, and maintenance of manual and power equipment including but not limited to tractors, mowers, clippers, edgers, and blowers Renewal of planted and hardscape landscape as directed including but not limited to site preparation, planting, transplanting, soil amending, and mulching Safe and responsible operation of vehicles in the execution of daily duties amid a densely crowded campus to transport materials, equipment, and fellow gardenersOperate and maintain manual and power equipment such as mowers, tractors, clippers, edgers, and blowers Inspection, maintenance, and repair of campus irrigation systems and replacement as directed mplementation of landscape designs from plans or as directed for new spaces created as a result of construction Daily observation of outdoor campus safety, reporting trip hazards, inadequate lighting conditions, and any other safety or hazard potential Qualifications: High school diploma or equivalent Minimum of two years of gardening and landscape experience Knowledge of common trees, plants, turf maintenance, and pest control methods. Knowledge of irrigation systems and ability to perform repairs and maintenance Must be able to lift 60 pounds Willing to work weekends and overtime if needed Please review full job description and apply through our Career Portal: https://jobs.crelate.com/portal/hroptionsinc/job/ubdrdrr1mg6xorrxdsi1tt9exc?crt=1759792738173 Pay Rate: $36.86 per hour

O2 Treehouse, Luxury Treehouse Fabrication Company looking for skilled fine finish carpenter to work on a short term Job. The job is for a high end patio finish wood work. Must be skilled in mitered corner work, molding, notching etc. Please have a portfolio of work and references. Please contact Matt. Matt@o2treehouse.com. to respond to this ad.

Immediate Work Available, Licensed Electricians Needed. Job Location in Jackson, WY. $50/hour + $15 Per Hour Per Diem Available. Wage is DOE. Benefits Available. Email Resume or Fax to 801.393.6660

Apply here: https://forms.gle/Mof8KihCzoVL9YB1A ; start ASAP We're paying people to record the real tasks they already do at work or outside of work. You will use a small camera kit to capture common hand-intensive activities you are comfortable doing. We provide gear, a quick checklist, and short training video. Examples of tasks you can record-- Salon and spa • Section, clip, comb, and cut on a mannequin or your practice head • Foil fold and alignment, elastic band wraps, blow dryer with brush • Nail care on practice tips, pump and apply lotions to silicone pads Food and retail • Chop, slice, scoop, portion, and wrap sandwiches using practice ingredients • Stock shelves, open boxes, tape, label, scan to a checklist • Bag and balance mixed items, thread receipt rolls, remove security tags Skilled trades and home maintenance • Start screws, tighten to click, strip and crimp simple connectors • Apply PTFE tape to threads, seat compression fittings, zip-tie cable bundles • Measure, cut, and place painter’s tape or shrink wrap to markings Assembly lines • Start fasteners by hand, drive to torque click, apply threadlocker where indicated • Strip and crimp terminals, mate keyed connectors, tug test and label harness ends • Wrap PTFE on threads, seat compression and push-to-connect fittings, leak check with soapy water • Route cables through guides, zip-tie and trim flush, add heat-shrink to strain-relief points • Measure, cut, and place painter’s tape or shrink wrap to alignment marks on the fixture • Apply adhesive beads to templates, clamp parts in a jig, release after cure time • Press-fit bearings and bushings with arbor press, verify depth with go/no-go gauge • Load parts into test jig, scan barcode, record pass or fail, place in the correct bin • Print and apply labels to datum edges, pack finished units with kitted accessories Healthcare practice and fitness • Luer lock connections and sterile pack opens on mannequins • Kinesiology tape measure, cut corners, apply to targets on a dummy arm • Bandage wrap counts and tension targets on practice pads Other everyday tasks • Gift wrap and bow tying, precise label placement • Laundry fold sequences and towel wraps • Bicycle tune basics like cable housing trim and zip-tie routing • Instruction following tasks (assembling a kit, mass production repetitive tasks, etc.) • Artisan level sewing / craft tasks Instruction-following tasks Great for people who like clear steps, checklists, or simple rules. • Follow a printed 10-step SOP to assemble a small kit. Check each box as you go • Measure and cut three cable lengths to targets of 10 cm, 15 cm, 25 cm. Label each with the printed tags • Place object on a mat, align corners to the grid, take top view and side view following the card • Timed checklist. Perform a five-item sequence in order. Example: open box, remove tray, place item, apply label, close lid Pay and schedule • Paid 3 to 4 hour trial session • Followed by a monthly contract with planned scenes and hours if trial goes well • Contractor role. Gear provided. Same week payouts How to apply Fill this form: https://forms.gle/Mof8KihCzoVL9YB1A to apply for a trial If the link is not clickable, paste it in your browser. Referral bonus Successful referrals are 100 dollars. Email me the person’s name and email ID and I will send you a referral if the person applies and we end up hiring.

We are looking for a Maintenance Technician for a small 24 Unit Apartment Community to perform general maintenance, repair, and upkeep tasks for residential buildings (2) and common areas to keep the property in good condition. Repairs: Plumbing: Fixing leaky faucets, unclogging drains, and repairing pipes. Electrical: Replacing light fixtures, mounting TVs, and performing other basic electrical tasks. HVAC: Checking for proper operation of Thermostats, Smoke and C02 Detectors General: Patching drywall, painting walls and ceilings, and repairing minor carpentry issues. Maintenance & Upkeep: Routine Inspections: Conducting regular checks to identify and address potential problems. Maintain trash and recycling receptacles around the facility. Maintain All Exterior Lighting and Utility Closet Assist Manager with other Projects as assigned

Construction company looking for an experienced Class A Driver with Equipment Operator experience Responsibilities include: - Operate Class A vehicles to safely transport heavy equipment, machinery, and materials to and from job sites. - Coordinate delivery and pickup schedules with field superintendents and office staff to meet project demands. - Operate all company and non-company equipment being utilized on job sites to assist with specific tasks as needed. - Serve as the primary point of responsibility for the general maintenance, organization, and readiness of all company trucks (the fleet) and all non-drilling construction equipment. - Perform and document routine preventative maintenance on all assigned vehicles and equipment, such as fluid level checks, tire pressure, and basic inspections. - Maintain the overall organization, cleanliness, and safety of the entire company yard. - Develop and implement efficient systems for storing equipment, tools, and materials. - Conduct regular inventory checks of yard assets. Qualifications: - Possession of a valid Class A Commercial Driver's License and a clean driving record. - Proven experience in heavy equipment operation and routine maintenance. - Strong organizational skills and the ability to manage a demanding workload. - Excellent communication skills for coordinating with both field and office staff. - Ability to work autonomously and manage time effectively. Physical Demands: - Ability to operate heavy equipment and commercial vehicles for extended periods. - Capability to lift and carry heavy objects (up to 75 lbs.) and perform physical labor in various weather conditions. - Comfortable working in a construction and yard environment.