CDL- A Drivers *ASAP* - Drop & Hook - Opportunities (Phenix city, AL)

**BUSY REVERE BASED TRANSPORTATION COMPANY** *ALL SHIFTS AVAILABLE *TRANSPORTING PASSENGERS *FOR MORE INFORMATION: *CONTACT RICHARD @ (781) 913-6613 (LOCAL GEOGRAPHICAL KNOWLEDGE AND GOOD DRIVING RECORD A MUST)

Procon is a top-ranked construction management and technology consulting firm with 25 years of experience delivering high‑impact projects across the U.S. and worldwide. An ENR Top 100 CM/PM firm for five consecutive years, we specialize in program management, project controls, commissioning, and virtual intelligence—and offer an excellent platform to grow your career while shaping the future of the built environment. Procon now seeks a Mechanical QA Representative for a long term opportunity in the Pullman, WA area.  The ideal candidate will have 8 years or more of experience conducting mechanical inspections on new construction and renovations of buildings. The ideal candidate will review blueprints, monitor construction progress, examine interior/exterior work, utilizing survey instruments to verify completed work, taking photographs and maintaining a log. This role requires various skills and experience as listed below. Requirements Qualifications & Skills Must have 8 years of experience as a mechanical inspector with at least one project over $50M in dollar amount. Bachelors in mechanical engineering degree or related field is required for less than 10 years of experience. Must have experience with government construction. Government or military project experience is preferred. Must have excellent communication and problem-solving skills. A high school diploma or equivalent is required for all candidates. OSHA 30 Hour Certification is preferred. Experience with Prolog Construction Management software is preferred. Ability to obtain CQM certification within the first 1st month of employment. Ability to work on site is required. Responsibilities & Duties Coordinate and facilitate all construction activities related to the General Contractor (GC) and Client. Provide assistance for any and all contract issues related to mechanical systems on all phases of the design-build contract. Provide daily onsite field representation to monitor construction contractor performance and inspect work in accordance with specifications and drawings. Provide technical expertise of the products/materials being installed in the project. Monitor all construction activities scheduled with emphasis on milestones, phasing/ sequencing, submittals, efficient and balanced work flow, major test and any unique requirements needing special schedule or tracing. Monitor project for cleanliness. Monitor and inspect the GC for compliance with current safety regulations, standards, project safety plan and report any non-compliance to the Client. Immediately notify the Client when any life threatening conditions are observed, and provide assistance as necessary to remedy such situations. Provide electronic daily reports of the contractor’s and sub-contractors’ work activities witnessed during site monitoring. Provide summary of and discrepancies from the requirements of the Contract Documents. Provide daily site photos to be saved electronically at a designated location on the Client’s network. Provide support to the Senior Project Manager in all design reviews prior and during construction. Provide pre-construction, during construction and post-construction photos of the site. Provide project coordination and construction quality assurance services for the technical aspect of the project. The inspector shall physically verify correct materials delivered and/or in secured storage on or off site, proper materials installed, and percentage of work satisfactorily completed and in place and provide this information to the CM. Benefits Salary commensurate with experience. Interested and qualified candidates please submit a cover letter and a resume. Procon offers competitive salaries and a comprehensive benefits package, including full medical/dental insurance and 401(K) plan. Procon is an equal opportunity employer and considers qualified applicants for employment without regard to race, gender, age, color, religion, disability, veteran status, sexual orientation, or any other protected factor.

We are a local bakery looking for a reliable Delivery Driver to join our team immediately. You will drive a 16’ box truck (no CDL required) to deliver fresh bread to our customers on a set route. Job Details: • Schedule: Midnight – 9/10 AM • Days: 5 days per week (Mon, Tuesday, Thur, Fri, Sat). Wed/Sun are off. • Pay: commensurate Commission+salary • Start Date: Immediate Responsibilities: • Drive a 16’ box truck (CDL not required) • Pick up bread from the bakery at midnight • Deliver to multiple stops on a set route • Ensure timely and accurate deliveries • Handle bread with care to maintain quality Requirements: • Valid driver’s license and clean driving record • Ability to safely operate a 16’ box truck • Ability to lift and carry bread trays • Dependable and punctual • Familiarity with local routes is a plus Why Join Us? • Immediate start • Consistent overnight hours • Work independently on a steady route • Be part of a growing bakery team 📍 Reply to this post with your interest along with your phone number and resume. Apply today and start delivering tomorrow!

Procon is a top-ranked construction management and technology consulting firm with 25 years of experience delivering high‑impact projects across the U.S. and worldwide. An ENR Top 100 CM/PM firm for five consecutive years, we specialize in program management, project controls, commissioning, and virtual intelligence—and offer an excellent platform to grow your career while shaping the future of the built environment. Procon now seeks a Electrical QA Representative for a long term opportunity in the Pullman, WA area.  The ideal candidate will have 8 years or more of experience conducting mechanical inspections on new construction and renovations of buildings. The ideal candidate will review blueprints, monitor construction progress, examine interior/exterior work, utilizing survey instruments to verify completed work, taking photographs and maintaining a log. This role requires various skills and experience as listed below. Requirements Qualifications & Skills Must have 8 years of experience as an electrical inspector with at least one project over $50M in dollar amount. Bachelors in electrical engineering degree or related field is required for less than 10 years of experience. Must have experience with government construction. Government or military project experience is preferred. Must have excellent communication and problem-solving skills. A high school diploma or equivalent is required for all candidates. OSHA 30 Hour Certification is preferred. Experience with Prolog Construction Management software is preferred. Ability to obtain CQM certification within the first 1st month of employment. Ability to work on site is required. Responsibilities & Duties Coordinate and facilitate all construction activities related to the General Contractor (GC) and Client. Provide assistance for any and all contract issues related to mechanical systems on all phases of the design-build contract. Provide daily onsite field representation to monitor construction contractor performance and inspect work in accordance with specifications and drawings. Provide technical expertise of the products/materials being installed in the project. Monitor all construction activities scheduled with emphasis on milestones, phasing/ sequencing, submittals, efficient and balanced work flow, major test and any unique requirements needing special schedule or tracing. Monitor project for cleanliness. Monitor and inspect the GC for compliance with current safety regulations, standards, project safety plan and report any non-compliance to the Client. Immediately notify the Client when any life threatening conditions are observed, and provide assistance as necessary to remedy such situations. Provide electronic daily reports of the contractor’s and sub-contractors’ work activities witnessed during site monitoring. Provide summary of and discrepancies from the requirements of the Contract Documents. Provide daily site photos to be saved electronically at a designated location on the Client’s network. Provide support to the Senior Project Manager in all design reviews prior and during construction. Provide pre-construction, during construction and post-construction photos of the site. Provide project coordination and construction quality assurance services for the technical aspect of the project. The inspector shall physically verify correct materials delivered and/or in secured storage on or off site, proper materials installed, and percentage of work satisfactorily completed and in place and provide this information to the CM. Benefits Salary commensurate with experience. Interested and qualified candidates please submit a cover letter and a resume. Procon offers competitive salaries and a comprehensive benefits package, including full medical/dental insurance and 401(K) plan. Procon is an equal opportunity employer and considers qualified applicants for employment without regard to race, gender, age, color, religion, disability, veteran status, sexual orientation, or any other protected factor.

Shift Schedule: Monday - Friday 7am - 4:30pm If you’re a licensed CDL Driver looking to advance your career with a nationally established company, look no further. ABC Supply, America’s largest wholesale distributor of exterior and interior building products, offers professional driving opportunities that allow you to do what you love every day and still be home every night. In this role, you will ensure the safety of each delivery from the moment you leave the facility until you have completed each job. ABC Supply is proud to be an employee-first company. In fact, we have won the Gallup Great Workplace Award every year since its inception in 2007, and Glassdoor has named us one of the best places to work in the country. Be part of a company that recognizes your talents, rewards your efforts, and helps you reach your full potential. At ABC Supply, we have YOUR future covered. Specific duties may include: •Treating customers in a friendly and professional manner •Conducting a safe work zone during each job site •Adhering to assigned delivery schedule and following all job directives precisely •Documenting every step of each delivery by taking and uploading photos with our camera phone system •Completing a thorough load check on your truck before leaving the branch, ensuring that all delivery materials are firmly secured and all parts of your truck are in compliance with all federal, state, and local regulations •Working in cooperation with the Delivery Material Handler to determine where to set the materials and unloading them •Completing and filing all logs and required government paperwork in a precise and timely manner •Providing the customer with an invoice on completion of each delivery and collecting the entire due amount on COD deliveries •Responsibilities may include warehouse work, including loading and unloading of materials on to or off of trucks or into warehouse as assigned •This position does not require over the road travel Specific qualifications include: •Valid CDL - Class A or B •The ability to lift 75-100 pounds repeatedly (your most common cargo will be 70 pound bundles of shingles) •Pre-employment drug screen and random drug screens are required •Straight truck experience is preferred Benefits may include: •Health, dental, and vision coverage - eligible after 60 days, low out of pocket •401(k) with generous company match - eligible after 60 days, immediately vested •Employer paid employee assistance program •Employer paid short term and long term disability •Employer paid life insurance •Flex spending •Paid vacation •Paid sick days •Paid holidays Equal Opportunity Employer / Drug Free Workplace ABC Supply values diversity and we actively encourage women, minorities, and veterans to apply.

The Manufacturing Associate-Soldering I collaborates directly with the Team Coordinator and Department Supervisor to ensure that every soldered component meets or exceeds IPC standards. Vanguard EMS, Inc. is in the service business. Even with Vanguard's state of the art technology, vast manufacturing capability, and leading-edge information tools, we wake up every day thinking about how best to serve our customers, suppliers, and the communities in which we live. Requirements What you’ll do: Follow process documents and workflow instructions Hand solder a variety of electronic components Inspect and quality check own work/work of others Ensure that products meet all customer and regulatory requirements. Perform other duties as assigned. What you’ll need: Strong attention to detail Ability to actively follow detailed directions written and verbal. Ability to use a microscope for extended time. Ability to effectively manipulate extremely small and/or fragile components and tools. Ability to work with minimal supervision and make productive use of time A strong work ethic and desire to succeed Education and/or Experience: High School Diploma, GED or Equivalent The physical demands and work environment characteristics described above are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. This Job Posting is not intended to be an all-inclusive list of all the responsibilities associated with this position. Management reserves the right to modify and assign other duties as necessary Benefits Employees enjoy a benefits package including: Medical, Dental & Vision 401K (with employer match) Paid time off Paid holidays Profit sharing