Program Director, Precision Manufacturing and Maintenance - West GA (LaGrange)

Apply Today, Start Tomorrow! Apply Online or In Person - Conner Industries (Guardian Packaging) - 3615 Security St, Garland, TX 75042 Pay: $17-$20/hour DOE Benefits: Medical, Dental, Vision, Disability, Life, 401(k), Tuition Reimbursement Assistance Available. 8 paid holidays, and Accrued PTO available at 30 days! COMPANY Conner Industries, Inc. stands out as a dynamic and expanding player in the industrial lumber, custom wood packaging, and integrated packaging sectors. Boasting an excellent reputation built over 40 years of leadership in the industry, we proudly operate 17 manufacturing facilities and hold the position of #2 in U.S. market share. KEY JOB RESPONSIBILITIES Assembling pallets and crates, cutting and stacking lumber. Requirements DUTIES AND REQUIREMENTS Check components for quality. Read and interpret job orders. Must be self-motivated and meet the daily expectations of the supervisor. Use good judgment. Learn to identify wood species and grade of material. Must be able to perform routine maintenance, repairs, and adjustments to meet quality specifications and industry standards. Actions should ensure a safe and productive work environment, including housekeeping, for yourself and co-workers. Maintain an acceptable attendance record. Must be able to work in a team environment. Perform other duties that may be assigned. QUALIFICATIONS, EDUCATION & EXPERIENCE Manufacturing experience preferred. Experience with air tools including nail guns and other manufacturing tools. Able to read and interpret job orders. Able to listen and communicate effectively with co-workers, customers and management, and respond to common inquiries or complaints. Able to apply basic mathematical concepts like addition, subtraction, multiplication, and division to such tasks as job order verification. Must be able to use and read a standard and/or metric tape measure. Able to apply commonsense understanding to carry out detailed written or oral instructions. Must be self-motivated and able to make limited and independent judgments based on given alternatives. Able to define problems, establish facts, and draw valid conclusions. Able to interpret an assorted number of tasks or instructions. PHYSICAL DEMANDS While performing the duties of this job, the employee is required to stand 100% of the time. The employee is required to use hand to finger, handle, or feel objects, tools, or controls in a fast pace environment. The employee is required to reach with hands and arms; stoop, kneel, crouch and talk or hear. The employee is required to use repetitive motions. The employee must regularly lift and/ or move up to 40 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, peripheral vision and the ability to focus. WORK ENVIRONMENT While performing the duties of this job, the employee will work in an indoor and partial outdoor manufacturing environment. The noise level is usually moderate to high and requires the use of hearing protection. The employee is required to wear PPE. The employee may be exposed to weather conditions prevalent at the time. The work environment is structured, and lunches and breaks are regulated. Must notify supervisor or group leader when leaving work area. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change. EEO Statement Conner Industries provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Conner Industries complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. Conner Industries does not disqualify applicants that test positive for THC on the pre-employment drug screen. As permitted by state law, applicants being considered for positions with the following responsibilities: CDL Drivers, Forklift Operators, Sales, Maintenance, Management, and all Corporate positions, must pass a drug and alcohol test, done through an outside vendor, Quest Diagnostics, before beginning work in that position. Refusal to submit to testing will result in disqualification for the desired position. Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k) Life Insurance Paid Time Off - Accrued Immediately, Available at 30 days 8 Company Paid Holidays Short Term & Long Term Disability Tuition Reimbursement Program - Including Trade Schools Training & Development

QUALITEL PROFILE: Qualitel is an Electronics Manufacturing Service (EMS) provider that specializes in high end, high reliability product applications. The company invests heavily in people and technology to stay at the forefront of this field. The goal of Qualitel is to help its employees achieve self-sufficient, healthy and secure lives. PRINCIPAL RESPONSIBILITIES: Assembler I: Access and follow on-line documentation. Prep components by hand or utilizing equipment per documentation. Identify component values. Pre-wave insert thru-hole components in pcb by hand. Hand-solder thru-hole components. Verify work performed by your self and peers meet IPC standards. Complete tasks within specified time or notify lead of inability to do so along with reason. Assembler II: All functions required at Assembler I level. Hand-solder SMT components. Remove and replace thru-hole comp. without board damage. Solder wires and cables. Identify assembly and document issues. Successfully complete J-Std. Training and IPC-A-610 Acceptability of Electronic Assemblies Training. Assembler III: All functions required at Assembler I and II levels. Remove and replace SMT components without board damage. Perform SMT rework. Provide back-up support for lead in their absence. Write ECO to have assembly and document issues corrected. Complete NCP form when non-conforming product is identified. Successfully complete IPC-7711/IPC-7721 Rework and Repair of Electronic Assemblies Training. DESIRABLE QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE. High School diploma or general education degree (GED) plus a minimum of one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively with co-workers and engineering and management staff. MATHEMATICAL SKILLS. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. PHYSICAL DEMANDS. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. In this role, the employee will frequently engage in tasks requiring manual dexterity, including handling objects and reaching. Standing will be required for approximately 80-90% of the work time. Essential visual capabilities encompass close vision, color differentiation, peripheral vision, and depth perception, with an ability to adjust focus as needed. *Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum BENEFITS: • Salary range: $19/hr to $30/hr, plus overtime as needed • Base pay offered may vary depending on various factors, including, but not limited to: job-related knowledge, skills, and experience • Profit Sharing • Bi-weekly Pay • Monday – Friday: 6:00am – 2:30pm or 3:00pm – 11:30pm • Compensation packages also include comprehensive benefits, 401K contribution and match, Flexible Spending Account (FSA), Medical, Vision, Voluntary Dental, Paid Time Off, Vacation, Paid Holidays and more

Design Engineer –(1st Shift ) Structural & Architectural Steel Location: Caledonia, WI | Onsite Only Employment: Full-time, Permanent W-2 (No relocation) Compensation: $55,000–$65,000 DOE + Full Benefits Eligibility: U.S. Citizen or Green Card Holder (Residence within 45-minute commute) Why Join Us? Join a financially stable, casual manufacturer housed in a brand-new, state-of-the-art facility. Immune to economic downturns—even thriving during recessions and pandemics—our team enjoys a true work/life balance, accessible management, and a culture that values your ideas. No two days are the same: you’ll tackle a variety of projects and never get bored. What You’ll Do Develop 3D CAD models and detailed production drawings for large-scale, motorized industrial door systems Customize designs to meet unique structural, mechanical, and electrical client requirements Prepare comprehensive technical documentation for both fabrication and installation Collaborate with engineers, fabricators, and installers to ensure precision and quality Requirements What We’re Looking For Associate’s degree (or higher) focused on architectural and structural steel design 2+ years of hands-on design engineering experience Proficiency in AutoCAD or equivalent 2D CAD software Experience with 3D modeling tools such as SolidWorks or Tekla Basic understanding of electrical schematics preferred Consistent work history with no short-term roles under 3 years Benefits Perks & Benefits Competitive pay and comprehensive benefits package Stable, growth-oriented company — no layoffs in 40+ years Modern facility with collaborative, politics-free environment Opportunities for professional development and cross-functional projects If you’re ready to apply your structural steel design expertise in a dynamic, supportive setting, we want to hear from you!

QUALITEL PROFILE: Qualitel is an Electronics Manufacturing Service (EMS) provider that specializes in high-end, high-reliability product applications. The company invests heavily in people and technology to stay at the forefront of this field. The goal of Qualitel is to help its employees achieve self-sufficient, healthy and secure lives. POSITION OVERVIEW: We are seeking a Test Engineering Technician to join the test engineering team at Qualitel. In this role, you will primarily be troubleshooting and resolving failures in Printed Circuit Board Assemblies (PCBAs), ensuring our products meet the highest quality and reliability standards. This position requires a solid understanding of electronics, strong analytical and diagnostic skills, and a meticulous attention to detail. You’ll be working closely with cross-functional teams, supporting continuous improvement efforts in our Circuit Card Assembly (CCA) test and debug processes. KEY SUCESS FACTORS: 1 Month Goals: o Complete all company training o Gain familiarity with Qualitel’s internal software tools and systems o Demonstrate proficiency using basic test equipment (DMMs, o-scopes, power supplies) o Identify and troubleshoot basic manufacturing errors (e.g., solder bridges, backwards/missing components) 3 Month Goals: o Independently perform functional testing and initial troubleshooting on assigned PCBAs o Accurately document failures and root causes in accordance with company procedures o Begin interpreting schematics and test documents to troubleshoot to component level 6 Month Goals: o Routinely troubleshoot complex PCBA failures down to the component level o Act as a resource for newer technicians; provide informal guidance or peer training o Identify and recommend process or documentation improvements to enhance yield and efficiency o Take ownership of select product lines or test areas; drive quality and throughput PRINCIPAL RESPONSIBILITIES:  Perform functional testing and debug of PCBAs using standard electronic test equipment (oscilloscopes, multimeters, Automated Test Equipment, etc.).  Troubleshoot failed PCBAs and identify manufacturing defects such as shorts, opens, missing or reversed components.  Interpret schematics, drawings, and test documentation to isolate and resolve issues down to the component level.  Maintain detailed failure documentation and test records for traceability and process improvement.  Support production, quality, and engineering teams by providing feedback on test results and recurring failure trends.  Participate in test development and continuous improvement initiatives.  Ensure all work is completed accurately, on time, and within established labor standards. Communicate effectively with other technicians, supervisors, and management. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: Associates degree in Electronics or certification program requiring two years to complete preferred, or 1-3 years related experience and/or training. Working knowledge of Electronic Theory and component level [digital and analog] troubleshooting practices required. LANGUAGE SKILLS: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS: Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include the ability to adjust focus. The noise level in the work environment is usually moderate. BENEFITS: • Salary range: $20/hr to $30/hr, plus overtime as needed • Base pay offered may vary depending on various factors, including, but not limited to: job-related knowledge, skills, and experience • Profit Sharing • Bi-weekly Pay • Monday – Friday: 6:00am – 2:30pm or 3:00pm – 11:30pm • Compensation packages also include comprehensive benefits, 401K contribution and match, Flexible Spending Account (FSA), Medical, Vision, Voluntary Dental, Paid Time Off, Vacation, Paid Holidays, Employer Paid Life Insurance and more

Courier Cooperation of Hawaii is an Obran Logistics company. Obran Cooperative is the first worker-owned cooperative conglomerate in the US. At Obran, we believe that everyone should own their work, and that ownership can dramatically improve our lives, both financially and emotionally. Growing worker-ownership is foundational to building a more equitable and competitive economy, an economy that enables the people who create value through their hard work to share in the value they create. At Obran, we are pioneering a new approach to grow worker-ownership at scale and create a new economy. We are looking for a qualified Freight Driver to join our team! You will be responsible for safely operating a 16' to 18' box truck with a capacity of at least 24,000 pounds Gross Vehicle Weight (GVW).  This is a dedicated client route that operates Monday through Saturday. The driver must be available Monday through Friday from 6:00am-3:00pm, and on Saturday from 6:00am to 12:00pm. The ideal candidate must have a clean Type 3 Driver's License, be a clear communicator, reliable and accountable. At least one year of truck driving experience is preferred (but not required), as is the possession of, or the ability to attain, a Department of Transportation Medical Card. Requirements Delivery Driver Key Responsibilities: Delivers products to our customers in a safe, courteous, and timely manner. Establishes and maintains positive relationships with customers. Reviews and verifies invoices and purchase orders when necessary to ensure accuracy. Inspect delivery vehicles and insures the safety and security of the loading and unloading process. Ensures the safety and security of the loading and unloading process. Contacts customers to confirm delivery details when necessary. Determines placement of merchandise, follows safety and lifting protocols during deliveries. Maintains delivery logs and records Requirements Located in Honolulu, Hawaii Available Monday through Friday 6:00 am - 3:00 pm, and Saturday 6:00 am - 12:00 pm  High School Diploma, or GED equivalent Previous experience truck driving or other related fields (preferred) Good communication and organizational skills Ability to problem solve Familiarity with local streets, neighborhoods, and routes Must be responsible & reliable Ability to work well under pressure in a fast-paced environment Ability to work cohesively as part of a team Must have a valid driver's license Ability to handle physical workload (up to 50 pounds) Must pass pre-employment drug test. Must be willing and able to drive a flatbed and/or box truck Benefits Pay Range: $18 - $22 USD Hourly based on experience We will consider employment for qualified applicants with arrest and conviction records. Schedule: Monday - Friday F/T (6:00 am -3:00 pm) Saturday P/T (6:00 am - 12:00 pm) Benefits • Medical Insurance • Dental Insurance • Optical/Vision Insurance • PTO • Overtime Available Our Mission Obran Cooperative’s mission is to put the engines of business to work for humanity. Our Vision Obran will be the world's largest worker-cooperative conglomerate. We exist to grow profitable, useful, and impactful businesses that serve our members, customers, and communities. We acknowledge structures of inequity and embrace the struggles to overcome them, one workplace at a time. Our Values Democracy: We empower and educate members to participate fully in workplace decisions. Innovation: We question the status quo and find new ways of working that are better for ourselves, our customers, our communities, and the environment. Solidarity: We act in ways that promote equity and inclusion; we are pro-black, pro-women, pro-LGBTQ+, and against hate and discrimination in all its forms. Humanity: We believe that workers are humans first; we foster dignity, respect, and joy in our interactions with each other. Balance: We think critically and holistically about our decisions, and seek balance in the short- and long-term outcomes of all stakeholders we touch. Our stakeholders include our members, our families, our communities, our investors, our customers, our suppliers, and the environment. Our Principles This organization operates in accordance with the Rochdale cooperative principles: Voluntary and open membership Democratic member control Members’ economic participation Autonomy and independence Education, training, & information Cooperation among cooperatives Concern for community Salary Range Disclaimer The base salary range represents the low and high end of the range for this position. Actual salaries will vary and may be above or below the range based on factors including but not limited to location, experience, net disposable income, and performance. The range listed is one component of Obran’s total compensation package for employees/members. Other rewards may include quarterly bonuses, Cooperative Membership, an open Paid Time Off policy. Equal Opportunities and Accommodations Obran is deeply committed to creating workplaces and a community of members where equity is prioritized and valued. We believe that traditional corporations’ bad behavior disproportionately hurts the most marginalized people in society — including people of color, people from working class backgrounds, women and LGBTQ people. We believe that these communities must be centered in the work we do. Hence, we strongly encourage applications from people with these identities or who are members of other marginalized communities. Obran is committed to providing reasonable accommodations to qualified individuals with disabilities in the employment application process. To request an accommodation, please contact the Obran Coordination team at 808-532-2600, or by email at peggy@cchawaii.com at least one week in advance of your interview.

JACO Machine Works is an AS9100 certified machine shop supporting the medical, aerospace and semiconductor industries. We are in immediate need of a CNC lathe machinist for our growing operation. This position is for first shift with overtime available who can: • Perform setups and operation of 7-axis CNC lathes, screw machines, and Multi-axis turret machines. • Retrieve machine programs from database, create/read tool lists for job. • Accurately set tools and work offsets. Change tooling as needed to restore operation. • Ensure produced parts meet drawing specifications with standard inspection instruments. • Able to troubleshoot and perform basic edits of G-code to solve problems. • Read CMM reports and adjust machine offsets as needed. • Follow work instructions and communicate with Supervisor. • Train machine operators on any job that you set up. • Deburring of parts when needed. • Perform basic machine maintenance. • Keep work area clean and organized. Required Job Skills: • Must be organized and accurate with documentation. • Familiarity with Fanuc and Mitsubishi or similar controls. • Must have good knowledge of machine processes of manufacturing and problem-solving skills to ensure strict quality/dimensional and cosmetic standards. • Able to work with tight tolerances like +/-.0002” • Must have a strong work ethic and work well with others. • Must have good knowledge of G and M codes. • Must be knowledgeable of GD&T. Desired Education/Experience: • High school diploma or equivalent qualification required. • Certificate or diploma in engineering is an advantage • 5-10 years' experience as a CNC machine operator or setup • Experience with Ganesh or Tornos turning equipment. • CAD/CAM experience a plus • Experience with JobBoss shop software a plus. • Background in AS9100 work environment. Mathematical Skills: • Ability to add, subtract, multiply, and divide measurement units, common fractions, and decimals. Working in and converting metric/imperial units. Computer Skills: • To perform this job successfully, an individual should have knowledge of basic computer use. Working with Word/Notepads, Excel, and logging in to databases, etc. Physical Requirements: • Ability to lift/or move up to 50 pounds occasionally. Benefits: • PTO and company paid holidays • 401(k) with employer match • Health insurance • Dental insurance • Vision insurance • Referral program All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees.