Browse
···
Log in / Register

Electrician (Phenix City Windows) (Phenix City)

$33/hour

CWCC+55 Phenix City, AL, USA

Favourites
Share

Description

Electricians earn $33.24 per hour We train and promote from within Excellent low-cost health benefits Retirement plan with employer-paid contributions Paid vacation and 10 holidays At Sierra Pacific Industries, we understand our greatest strength is the people who choose to build a career with us. We are a fourth-generation family-owned company that has grown to be one of the largest lumber and millwork producers in the United States. Our more than 6,000 employees are proud to work at our state-of-the-art sawmills and other facilities, including: manufacturing, custom wood-framed windows, fabrication, millwork, veneer, cogeneration, trucking, forestry, and other operations. Currently, we are seeking a qualified Electrician for our Windows division in Phenix City, Alabama. About the Position Building and troubleshoot 480V, 3-phase motor control equipment, PLC panels, operator consoles, and other control system components Install and wire on machine control devices such as photo eyes, proximity sensors, encoders, linear transducers, and other sensors Install conduit, pull and terminate wires, using appropriate tools and methods Install, disconnect, troubleshoot, and repair electrical motors Commission, program, and troubleshoot VFD’s Effectively read schematics/voltage, meters/amp, and meters/meg motors Troubleshoot and maintain Ethernet and other communication networks Recognize and troubleshoot mechanical defects Perform preventative maintenance and diagnosis on equipment Qualifications 2 years of industrial experience with verifiable proficiency in the primary duties listed above or will considered relevant degree/certification Experience reading electrical prints and schematics PLC programming experience preferred Experience with AutoCAD preferred Knowledge of photocells, limit switches, encoders, proximity sensors, analog and digital devices, frequency drives and three-phase motors desired Demonstrated ability to manage time and priorities under demanding circumstances Excellent communication, listening, and reasoning skills Why Join Our Team? Because this is more than an invitation, it's a commitment to offer opportunities for personal and professional growth to everyone! We ask people to grow with us and make the company even better. We provide an excellent benefit package including a full Health Benefits Plan (including medical, dental, and vision) with low-cost premiums, a 401(k) with Company Match, additional Retirement Contributions, and company-paid Life Insurance. How to Apply If you are qualified and would like to join our team, please apply online at: spi.careers Let’s talk! (334) 480-1915 Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans. About Our Company Sierra Pacific Industries is a fourth-generation family-owned company based in Northern California that started in 1949 and has grown to be one of the largest lumber and millwork producers in the U.S., employing around 6,500 crew members. Sierra Pacific continues to be a company where its employees are proud to work at state-of-the-art facilities and others strive to become part of the team. We own and sustainably manage more than 2.4 million acres of timberland in California, Oregon, and Washington. Our forests are sustainably managed under a 100-year plan by Registered Professional Foresters, Wildlife Biologists, Botanists, and other professionals. We are growing forests for our future, planting over 6 million new trees every year. In Spring 2024, we planted our 300 millionth seedling on our timberlands. This milestone was decades in the making, reflecting our commitment to sustainable forest management and ensuring we have forests not just for today, but for generations to come. Sierra Pacific effectively uses nearly 100% of every piece of wood we bring to our facilities. In fact, any small amount that isn't turned into hand-crafted doors and windows, millwork, lumber, or landscaping material is actually converted into electricity in our eight biomass-fueled power plants. We are proud that all Sierra Pacific facilities follow our drug-free and tobacco-free policies. As part of our safety in the workplace policy, an offer of employment is subject to a negative drug screen result. We use E-verify to verify the social security number and work authorization of all newly hired employees. Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans.

Source:  craigslist View original post

Location
CWCC+55 Phenix City, AL, USA
Show map

craigslist

You may also like

Workable
Inventory Management Specialist (Junior)
Resource Management Concepts, Inc. (RMC) provides high-quality, professional services to government and commercial sectors. Our mission is to deliver exceptional management and technology solutions supporting the protection and preservation of the people and environment of the United States of America. RMC is hiring for a Junior Inventory Management Specialist to support our customer onsite at NSWC Indian Head, MD.   The selected candidate will be expected to: Perform a wide range of substantive clerical/technical support work. Perform inventory accounting and control records entry and review, demand processing, requisition and re-supply, receipt and release of property, shipments, and management information recoverability. Perform periodic inventories of plant property, materials, and equipment. Gather information to support inventory records, discrepancies, and assist with corrective actions. Process disposal documentation as required, and post status record changes to maintain control of equipment dispositions. Process material receipts; enter data in the inventory control system; enter receiving and shipping documentation; and notify management of discrepancies with maximum supervision. Follow technical written procedures issued by the Federal Government for requisitioning, receiving, and storing supplies, repair parts, and equipment. Requirements A High School Diploma and (2-3) years of general work experience is required. An active DoD Secret clearance is required to start. The applicant selected may be subject to a security investigation and must meet eligibility requirements for access to classified information. Must have working knowledge of Microsoft Office Suite. Must be able to follow technical written procedures issued by the Federal Government. Must maintain a valid state-issued driver's license and be able to drive and operate a vehicle (car, truck, van). Must be able to lift up to 50 lbs. Benefits At RMC, we're committed to your career growth! RMC differentiates itself from other firms through its investment in our employees. We invest our resources to train, certify, educate, and build our employees. RMC can offer you a great place to work with a small company feel and give you the experience, tuition assistance, and certifications that will take your career to the next level. This also includes a competitive paid vacation package with 11 paid federal holidays. Additionally, we also offer high-quality, low-deductible healthcare plans, pet insurance, and a competitive 401K package. Salary at RMC is determined by various factors, including but not limited to location, a candidate's specific combination of education, knowledge, skills, competencies, and experience, as well as contract-specific requirements. The current salary range for this position will be $41,000 to $48,000 (annually). #LI-MB1
Indian Head, MD 20640, USA
$41,000-48,000/year
Workable
Fabricator (DAY shift)
Harco Fittings is a member of the IPEX group of companies. Our mission is to compete and grow using innovation, differentiation and extraordinary service. Harco Fittings LLC, founded in 1966 in Lynchburg, Virginia is a producer of gasketed joint injection-molded PVC and push-on gasketed joint ductile fittings. Our Harco locations span across seven states in the US and we are looking for new individuals to come be a part of a dynamic and growing team today! We currently have an exciting opportunity as a Fabricator. This role is based in our facility in Janesville, WI and reports to the Plant Manager. The hours are Mo-Fri from 5.30am until 2pm. The starting wage is $21.71 per hour.   Do not miss the opportunity to join a diverse group of people-centric professionals, thought leaders and rapid thinkers, entrepreneurs in spirit and status quo-fighters!   Job Summary Responsible for receiving, inspecting, and preparing parts for fabrication operations. Perform fabrication, assembly, and packaging operations. Principal Responsibilities Fabricate fittings to customer specifications using customized fabricating equipment, hand, power tools, adhesives, and fixtures. Obtain components from stock/production. Set-up equipment to match product requirements. Must be able to work in a team-oriented environment and demonstrate good communication skills. Inspect completed parts. Prepare parts for shipping by placing them in boxes or on pallets. Correctly label all parts and boxes as needed. Visually inspect all incoming pipes, components, and gaskets for defects. Apply 5S and Lean Manufacturing principles. Maintains a safe working environment by following Health, Safety and Environmental Policies and attending training that is provided where required. Maintains a respectful working environment by following Human Resource Policies and attending mandatory training when required. Assist in the coordination, preparation, and execution of year-end inventory. Completing and maintaining reports for managers as required, which may include: Production reports Scrap reports Other duties may be assigned when applicable. Requirements Previous experience in a manufacturing environment is strongly preferred, however, full training will be provided Must be knowledgeable in basic math Detail oriented with excellent analytical and problem-solving skills Must be a self-starter with good interpersonal and verbal communication skills coupled with an eagerness to learn Good team player including with a demonstrated ability to chip in to and foster a positive team environment Working knowledge of Health and Safety practices is helpful. After training, should exhibit an understanding of various types and sizes of pipes. Working Conditions Manufacturing plant environment Requires good mobility and involves considerable routine walking, standing for long periods, bending, and heavy lifting of 50 - 75 lbs. The use of hand tools including heat forming, pulling, belling, caps, reducer, saws, gluing Fast-paced environment where a considerable amount of sensory attention is required Benefits 401K plan with company match Comprehensive Health, Dental, and Vision coverage options Vacation and holidays Set schedule with bi-weekly pay Basic safety equipment (i.e. safety glasses, ear plugs) will be provided Reimburse COBRA costs while transitioning to IPEX benefits   IPEX is committed to providing accommodations for people with disabilities throughout the recruitment process and, upon request, will work with qualified job applicants to provide suitable accommodation in a manner that takes into account the applicant’s accessibility needs due to disability. Accommodation requests are available to candidates taking part in all aspects of the selection process for IPEX jobs. To request an accommodation, please contact HR at HR@ipexna.com. EOE.
Janesville, WI, USA
$21/hour
Cookie
Cookie Settings
Our Apps
Download
Download on the
APP Store
Download
Get it on
Google Play
© 2025 Servanan International Pte. Ltd.