Looking for Vendors !!! (Woodland Estates FL)

ABOUT THIS ROLE Verax Chemical Company (www.veraxproducts.com) is a small, family-run business in Maltby, which is about 20 minutes south of Snohomish. We are looking to hire an efficient and knowledgeable production manager to lead our chemical blending and manufacturing processes. The ideal candidate for this role will have experience in manufacturing settings, including mixing and packaging products following written instructions. They will also have experience preparing pallets for shipment and receiving shipments from carriers. The person in this position should have a strong attention to detail to ensure that they are producing high quality products every time. PRIMARY FUNCTIONS 1. Mixing formulations o Following batch sheet in adding chemicals and components to mixing tank. o Note small discrepancies on batch sheet. Report large discrepancies immediately. 2. Packaging line lead o Lead others in operation of packaging line. 3. Train and manage others in equipment operation. o Monitor operation and address any issues as they arise. o Ensure quality control parameters are met (fill weight, coding, clean, square labels, etc) 4. Outbound shipments o Prepare palletized freight for departure and work with drivers on loading. o Every shipment should have pallet labels, packing lists, and bill of lading. 5. Inbound shipments o Check-in incoming shipments. Check for damage and note on the bill of lading. o Deliver paper work to the office and notify of any issues with the shipment. o Put away received product. 6. Maintain a clean and tidy workspace 7. Property Maintenance o Currently this position also maintains the property as time permits (mowing, weed eating, etc.) This may be outsourced in the near future. SECONDARY FUNCTIONS 1. Retrieve / pour off small quantities of product for customers on short notice. 2. Notify Director of Operations of low inventory levels. 3. Assist team with other tasks as needed. KNOWLEDGE & REQUIRED SKILLS 1. Independent / self-directing – a good portion of the work is performed independently and without direct supervision. 2. Strong attention to detail – finished product should be clean, dry, have straight labels, etc. 3. Problem solving / logic problems (if this, then that) – need to be able to fix issues that arise with packaging equipment. 4. Able to follow specific written directions. 5. Able to carry 50 lbs up a half flight of stairs and lift to chest height repeatedly. 6. Friendly and works well with others – staff and customers. PAYMENT & BENEFITS 1. Hourly pay: $25 - $30 2. Benefits: paid time off, health insurance 3. Working hours: 8 a.m. - 4:30 p.m. daily (Monday - Friday).

Metal Fabricator and TIG welder We are the industry originator and innovator of superior family recreation products, and are looking for someone who can bring a wide range of metal manufacturing experience to our small dedicated manufacturing shop. This is a rare opportunity to join our dedicated team of long-term employees, averaging over 5 years tenure with our company.. Full-Time, $28-30/hr DOE ESSENTIAL DUTIES AND RESPONSIBILITIES: • Cut, fit, weld, and grind and prep various aluminum components to match plans, using bandsaws, drills, milling machines and hand tools • TIG welding of aluminum sheet metal, pipe and bar stock to meet quality standards for appearance and consistency • Make weekly deliveries and material pickups, using Company vehicle • Read and interpret plans and technical drawings • Organize weekly production and complete assigned work on time • Welding approx. 20-40% of the time, general fabrication 40-60% of the time, and 20-40% of the time performing a variety of other responsibilities, including making deliveries/receiving/shipping and assisting other company divisions when needed. REQUIRED QUALIFICATIONS: • TIG welding aluminum experience (Weld Test required), such as industry or vocational school experience. Certifications preferred, but not required. • Clean driving record (no DWIs or excessive tickets) • Commitment to details, with solid math, mechanical and technical skills • Flexible personality, eager to learn new skills, and contribute to the growth of the company. Eagar to assist other divisions such as shipping and plastic fabrication as required • Forklift and hand truck operating experience • Ability to stand for long periods, lifting parts to 50#, and operating forklift, truck and other machinery • Reliable attendance and strong work ethic. WHAT WE OFFER: Both our managers and employees recognize that going to work and remaining motivated involves more than just getting a paycheck, and we treat our valued employees very well. In addition to the supportive environment and generous benefits package below, you can also look forward to a welcoming company culture, that includes occasional company lunches, picnics and holiday parties which include families, and 3-day weekends every week! • 401K match • PTO • Profit sharing, • Medical, dental and vision coverage • 3-day weekends every week. Hours are M-T, 5-3:30 • Convenient Everett location, 2 blocks from bus routes

From our founding, Peninsula Components, Inc. (PENCOM) staff worked with design engineers, providing solutions for product designs. With each new design, we built a reputation for solving difficult problems. From drawing board to manufacturing, our design solutions have been purchased by factories around the world. By adding local logistics centers, and our “SOLUTIONS” approach, we provide a higher level of service and support. Today, we have over 25 logistics sites in North America, Central America, South America, Europe, and Asia. In 1999 we purchased our first manufacturing site, Accuracy Screw Machine in Hayward, California. Today, with plants in Nogales, Mexico and Dongguan, China; we provide a full range of precision machining, turning, milling, and high-volume production turning. These plants also manufacture PENCOM Captive Screws, Standoffs, Spacers, Press-in Sheet Metal Fasteners (Zins®) and Inserts for Plastics (Zerts®). With the purchase of Visible Inventory in 2005, we became the leader in INVENTORY AUTOMATION. Now customers no longer need to actively manage inventory; Visible Inventory remotely monitors it. Our “Manufactured globally, supplied locally” philosophy continues to provide low-cost global manufacturing with localized inventory. We are looking for a Warehouse Associate for our San Jose, CA location. Summary: Supports warehouse operations including but not limited to shipping and receiving, order tracking and fulfillment, material handling, inventory and record keeping. Essential Duties and Responsibilities (including but not limited to): • Run, prioritize, and distribute shipping orders daily to warehouse team to ensure orders are filled and delivered in a timely manner • Pull orders and prepare for domestic and international shipments, including special requests from customers in accordance with packaging, labeling, inspections, etc. • Monitor all request orders to ensure all requests are fulfilled • Perform outgoing visual inspection • Pull materials and prepare kits in-house • Responsible for monthly and year-end inventory audits • Maintain inventory controls by accurately documenting incoming shipments • Maintain quality service by following organization standards • Maintain a safe and clean work environment by keeping shelves, pallet area, and workstation neat • Maintain a clean receiving supply area by complying with procedures, rules, and regulations • Complete reports by entering accurate information • Adhere to all company policies and procedures • Duties, responsibilities, and activities may change at any time with or without notice by management Skills/Knowledge Required: • Ability to work collaboratively in a team environment • Ability to organize and plan priorities with minimal supervision • Assist with Inventory Control as needed • Document daily activities and work orders in electronic system • Safely operate a variety of equipment and/or vehicles as needed to complete essential duties • Act as a backup driver for PENCOM deliveries, as needed • Working knowledge of MS Office Suite (Outlook, Word, Excel, etc.) Experience/Education Required: • Minimum High School Diploma or GED; 1 or 2 years related experience and/or training; or equivalent combination of education and experience • Experience with mechanical components, connectors or high-volume machined parts highly desired • Forklift Certification highly desired • Clean DMV record required • Ability to safely lift up to 40lbs. Ability to safely lift up to 60lbs with buddy system What we offer: • Competitive compensation plan • Fun, flexible and casual work environment with amazing people • Paid holidays • Great benefits including; Medical, Dental, Vision, Flex Spending Account, 401k/Safe Harbor, Life coverage, and Pet insurance. (Eligible to participate the first of the month, following full 30 days from hire). EOE/M/F/D/V

MANY IMMEDIATE OPENINGS! 6 mos.-1 year mechanical assembly experience in a production/manufacturing environment. Must be able to work from verbal instructions and assembly drawings. Any related experience will be considered. Use of hand and power tools. SWING and DAY shift Openings.

We are a tile and stone company located in East Bay, seeking a Slab Helper or Slab Installer/ Fabricator, Full-Time positions who are self-motivated, with a positive attitude, and hard working. Slab Helper basic requirements: - Monday to Friday, 8 am to 5 pm - Must be dependable and punctual - Valid Driver License with a clean driving record - Ability to lift and carry in between 50 lbs to 80 lbs - Work on projects in the Bay Area - With experience will be a plus Slab Installer/Fabricator basic requirements: - Monday to Friday, 8 am to 5 pm - Must be dependable and punctual - Valid driver license with a clean driving record - Ability to lift and carry in between 50 lbs to 80 lbs - Work on projects in the Bay Area - Must have experience If you are interested, please reply to the posting by email or text at 510-853-0840. Salary will depend upon experience. ================================================================ Somos una empresa de azulejos y piedra ubicada en East Bay. Buscamos un ayudante de losa o instalador/fabricante de losa. Se busca un puesto de tiempo completo. Se requiere una persona con iniciativa, actitud positiva y muy trabajadora. Requisitos básicos para el ayudante de losa: - Lunes a viernes, de 8:00 a. m. a 5:00 p. m. - Debe ser confiable y puntual. - Licencia de conducir válida con historial de conducción limpio. - Capacidad para levantar y transportar entre 23 y 36 kg. - Trabajar en proyectos en el Área de la Bahía. - Se valorará la experiencia. Requisitos básicos para el instalador/fabricante de losa: - Lunes a viernes, de 8:00 a. m. a 5:00 p. m. - Debe ser confiable y puntual. - Licencia de conducir válida con historial de conducción limpio. - Capacidad para levantar y transportar entre 23 y 36 kg. - Trabajar en proyectos en el Área de la Bahía. - Experiencia imprescindible. Si está interesado, responda a la publicación por correo electrónico o mensaje de texto al 510-853-0840. El salario dependerá de la experiencia.

Concrete Batch Plant Operator 2-Year Project | Rotating Schedule | Manufacturing & Outdoor Environment We’re hiring Concrete Batch Plant Operators for a long-term, 2-year project. This role is responsible for accurately mixing and delivering concrete using specialized equipment, ensuring quality, safety, and efficient production in a dynamic jobsite environment. Key Responsibilities Batching Operations * Accurately weigh and measure raw materials (aggregates, cement, water, admixtures) * Use a computer-controlled system to produce specific concrete mix designs Equipment Operation * Safely operate and maintain batch plant equipment including mixers, conveyors, silos, and batching systems Quality Control * Monitor raw materials and finished concrete for compliance with quality standards and customer specifications * Conduct regular inspections and testing Maintenance * Perform daily and preventive maintenance on plant equipment (cleaning, lubrication, minor repairs) * Report major mechanical issues to supervisors Work Environment * Operates in both manufacturing plant and outdoor settings * Exposure to extreme temperatures, loud machinery, and moving equipment * Requires use of PPE (hard hats, safety glasses, hearing protection) * Physical tasks include bending, standing, walking, kneeling, twisting, and operating hand controls * Teamwork and collaboration with maintenance, quality control, and drivers is essential Schedule & Pay * Project Duration: 2 years * Shift Hours: 7:00 AM – 4:00 PM * Weekly Schedule: - Week 1: 3 days on / 4 days off - Week 2: 4 days on / 3 days off - (Rotates weekly) * Hours Worked: 40–50 hours/week * Pay: $35/hour * Per Diem: $140/day (for days worked) Resume required Must pass background and drug test Equal Opportunity Employer Apply now to start earning fast and secure your spot on this long-term project! We’re hiring immediately – limited positions available! Call Linda Alvarez 725-208-4669