Junior Assistant Construction Manager (North East Dallas)

CALIFORNIA CORPORATION NEEDS A RESPONSIBLE MANAGING OFFICER (RMO) WITH ACTIVE OR INACTIVE STATUS C-12 (EARTHWORK & PAVING) LICENSE IN GOOD STANDING. THIS IS NOT FOR FULL TIME EMPLOYMENT. IT IS FOR A CONSULTING POSITION. WILL PAY A MONTHLY CONSULTING FEE. CONTACT VIA E-MAIL OR CALL 818 760-4700.

As the Maintenance Technician, you’ll be responsible for ensuring that all production equipment are safe and in proper operating condition. Additional duties will be to perform all tasks following the cGMP requirements. OTHER ESSENTIAL JOB DUTIES AND RESPONSIBILITIES Acknowledge all production calls for critical point checklist and machine breakdowns Ensure all repairs and corrective maintenance performed is verified and properly documented Perform generated and all assigned Preventative and Predictive Maintenance schedule in a timely manner and following listed activities on a Computerized Maintenance Management System Monitor parts and determine minimum/maximum inventory on all assigned equipment. Record all parts used during repair and Preventative Maintenance activities. Assist Inventory Control and Maintenance Planner in physical count for costing. Collaborate with Production, Process Engineering and Product Development on quality issues and specifications Ensure housekeeping and safety compliance in the Maintenance shop Communicate all machine issues and progress of on-going maintenance undertakings and propose or recommend machine upgrade and projects for process and continuous improvement Fabricates, modifies and repair parts by using machine shop instrumentation and equipment Attend all maintenance meetings, trainings, educational workshops or webinars for updates and personal development Maintain positive team dynamic and overall department success Complete all work as assigned within established timelines and in compliance with all printed company policies and procedures Perform others duties and responsibilities, as assigned WORK ENVIRONMENT Exposure to cold temperatures in the winter and hot temperatures in the summer Work occasionally near mechanical parts and in high places Occasional duties in an outside environment Duties are performed primarily in a smoke-free environment PHYSICAL REQUIREMENTS Frequently required to stand, walk, bend, kneel, crouch, balance and reach. Regularly lift and/or move up to 50 lbs. Push/Pull up to 300 lbs. Requirements Qualified candidates will have either 2+ years of relevant experience as a Maintenance Technician in a fast-paced manufacturing set-up, or related field, or training at an accredited technical school Strong problem solving and decision-making skills Ability to work in a team environment on a variety of complex task and projects Well-developed interpersonal, organizational and analytical skills Well-developed written and verbal skills Ability to demonstrate safe working procedures Must be willing to work overtime or on weekends, as the workload demands Benefits ProCaps Laboratories provides: A starting rate of $28 an hour! Excellent Medical, Dental and Vision Insurance Health Savings Account with employer contribution Paid Time Off, Holiday Pay 401K plan with generous employer match 100% Company Life and Short-Term Disability Coverage Health & Wellness Program Gym Membership Reimbursement Program Healthy Vitamin Discount program Employee Referral Program Fantastic work environment that focuses on safety, quality, community, and amazing people. We hire top talent and celebrate the ingenuity and tenacity of our team members and leaders.

An Architectural Designer Firm in Great Neck, LI currently has an immediate opening for an office based architectural designer with background in residential design. We are looking for person with good drafting skills and designing sensibility for FULL TIME, PART TIME or FREELANCE positions. Need to work at the office in Great Neck, New York. REMOTE WORK / SPONSORSHIP NOT AVAILABLE. SOME EXPRIENCE PREFERRED, BUT WILL TRAIN IF REQUIRED. Qualifications: -Proficient in AutoCAD, Microsoft Office, Excel & Word -Ability to work primarily with 2D AutoCAD -Understanding of Construction Documents and Detailing

We are currently looking for a Substation Physical Engineer from 0 to 5 years of experience. Duties Assist with create/modify detailed design for Substation: Control building (relay panels, facilities, cable raceways, trays, etc.) Busbar and strain bus Equipment & support structures Assembly drawings Cables and connectors Lightning protection and lighting Grounding grid Conduit and tranches Perform basic calculations such as: Grounding Lighting and lightning Cable ampacity Tray sizing Trench sizing Conduit sizing Assist project manager to develop scope of work and conceptual design for the projects; Communicate and coordinate project activities with project manager, client, and others as needed; Take personal responsibility for the quality and accuracy of one's work; Requirements A Bachelor’s Degree in Electrical Engineering, Mechanical or Civil is preferred. 0 to 5 years of experience in Substation Physical design. Willing to pursue PE license in NY and NC. Desired knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards used in designing substation is critical. Periodic travel, ability to visit project sites. Salary Range: $60,000 - $86,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. Flexible Work Schedule Health/Dental Insurance 401k Plan with Employer Match Short & Long Term Disability Profit Sharing Paid Time Off Leadership Development Program Fitness Reimbursement Tuition Reimbursement Referral Bonus Program Wellness Program Team Building Events Community Service Events

Store Display and fixture Design company is seeking an experienced, motivated and responsible individual to fill the position of Draftsperson designer. Must be experienced with the process of producing client drawings and production/fabrication drawings. Must be experienced and proficient in CAD and CAM software, 3D rendering. Experience in creating CNC files required. The ideal candidate should be skilled in drafting decorative patterns, understanding materials and engineering, daily interaction with the production team, intricate millwork and heavily sculpted three-dimensional elements for production, great team working skills requested. Candidate must be familiar with materials such as solid wood, plywood, plastic, metal fabrication and veneer work. Must submit portfolio with application, no candidate without portfolio will be considered! For Individuals Only, No Businesses need apply! NOTE: No remote applicants will be considered. Hours are Monday through Friday 7:00 AM - 3:30 PM and must be available for occasional overtime weekdays and Saturday if necessary.

LOCATION: Between Aspen and Glenwood Springs SCHEDULE: Monday - Friday: 8:00 am - 5:00 pm | On call 24/7 SALARY: $65,000 per year. Plus 10% performance bonus. ABOUT US Worth Ross Management Company is an award-winning industry leader, and a team of extraordinary people. We have the advantage of recruiting and retaining the best talent in the HOA management industry. Diversity and inclusion are the only paths that allows forward progress and our success as a company stems from that philosophy.  ABOUT THE ROLE  Under the direct supervision of the General Manager, the Engineer will be responsible for delivering and maintaining all facilities of a residential high-rise building. General expectation is that this role maintains and preserves the life of all common area equipment, inclusive of both the interior and exterior of the building and complies with all City, County, State, OSHA, and all governmental agency mandates.  WHAT YOU'LL DO  Engineering management of a residential facility; including common areas, amenity space and parking garage. Provide quarterly cost analysis and cost projections for all utilities, chilled water, electrical, gas and on all maintenance items needed, filters, belts, valves, and maintenance equipment. Efficiency analysis and energy savings audits done on a quarterly basis. Create, execute, and maintain an automated preventative maintenance program to include all components of the building.  Implement and maintain all required maintenance SOPs as directed by GM and VP of Risk Management.  Maintain any “green energy” qualifications of the building.  Coordinate, maintain, and keep current all building component inspections.  Supervises full maintenance team and any other departments as assigned by the GM.  Develops training to ensure excellence in job performance.  Building and maintaining strong relationships with outside vendors. Coordinate contracted services and repairs, alongside the GM.  Keeps complete and accurate records of all maintenance requests submitted, commented on, and completed. Must be available for “on-call” after hours, weekends, and holidays and available for emergencies, as needed.  Ensures all safety precautions and procedures are followed while performing assigned duties.   Requirements EDUCATION/EXPERIENCE  High school diploma or equivalent WHAT YOU NEED TO SUCCEED  A minimum of 4 years of engineering experience, preferably in high-rise facilities. Should have a specific knowledge of all high-rise electrical, plumbing, stair pressurization, elevators, and mechanical systems.  Safety systems knowledge Elevator systems knowledge Fire pump and safety system knowledge Trash room / compactor knowledge Some experience with Building Link and Vantaca building management software.  An understanding that condo construction is not complete and will take place over the next several months.  This requires a need to deal with partial occupancy issues that impacts how the building systems are managed and operated. Benefits Medical Dental Vision Short term disability (STD) Long term disability (LTD) Employee assistance program (EAP) Identity theft protection Pet insurance  Retirement Paid Time Off (PTO)