Carpenter Wanted. Compensation up to $30/hr (El Paso, TX)

Refrigeration and Electronic Diagnostics / Repair Technician. CHILLER UPTIME TECHNOLOGIES, LLC is a well-recognized, high-tech chiller and heat exchanger repair company. CUT was established in 2006 to support high-tech industries such as semiconductor and aerospace. It has facilities in Springfield, OR and San Leandro, CA. We are looking for someone to repair high tech refrigeration systems and or PLC based control systems. Knowledge of semiconductor industry a plus. Requires a self-starter with ability to work and communicate with others. Service work includes electrical, control system, and instrument diagnostics. Compensation includes paid vacation, holidays, profit sharing via yearend bonus. Pay rate dependent on experience. Performance review after first month. General qualities we expect from applicants: • Ability to use basic hand and power tool; ability to use electronic test equipment • Demonstrated ability to represent the company in a dependable and professional manner • Must have, or be able to obtain EPA Universal certification within 3 months if you have the qualifying electrical background. • Working knowledge of Microsoft Windows OS. • Strong attention to detail • Highly motivated self-starter capable of working independently as well as in a small group setting. • Ability to perform mathematical calculations • Troubleshoot electronic systems and perform repairs • Basic technical knowledge to perform simple or routine tasks following detailed instructions, performs such tasks as replacing components, wiring circuits, repairing electronic equipment; and taking test readings using common instruments such as digital multi-meters, signal generators. • Knowledge of refrigeration systems, coolant systems, refrigeration recovery, vacuum systems, copper braising, plumbing, and HVAC technology. • Knowledge of PLC based control systems in instrumentation. • Be able to hold a security clearance if necessary. • Clean Driving Record.

Wages range from $35.45 to $39.02 per hour We train and promote from within Excellent low-cost health benefits Retirement plan with employer-paid contributions Paid vacation and 10 holidays At Sierra Pacific Industries, we understand our greatest strength is the people who choose to build a career with us. We are a fourth-generation family-owned company that has grown to be one of the largest lumber and millwork producers in the United States. Our more than 6,000 employees are proud to work at our state-of-the-art sawmills and other facilities, including: manufacturing, custom wood-framed windows, fabrication, millwork, veneer, cogeneration, trucking, forestry, and other operations. Currently, we are seeking a qualified Millwright / Maintenance Technician for our sawmill in Eugene, Oregon. About the Position Maintain and repair all mechanical parts and machinery in a manufacturing facility Troubleshoot, install, replace, and repair machines and equipment including mechanical, pneumatic, and hydraulic systems Dismantle machinery and equipment, locate cause of malfunctioning or mechanical breakdown, replace parts from stock or fabricate replacement parts as needed Fabricate machine components for repairs and improvements of mechanical devices Effectively conduct and assess diagnostic tests to ensure optimum system functionality Assemble, install, and proactively maintain mechanical systems, machinery, and equipment for efficient operation Operate arc welder, cutting torch, hand tools, forklift, and welding truck Fabricate, weld, mill, and lathe as needed Perform general maintenance in a safe and efficient manner and maintain a clean work area Work may consist of various shifts and overtime including weekends and holidays during busy production times Qualifications 2 years recent verifiable related work history or equivalent education Proficient in welding, cutting, and using hand tools for repairs Working knowledge of hydraulics, pumps, motors, gearboxes, conveyors, and bearings Ability to recognize, report, and repair mechanical defects Industrial mill maintenance experience is a plus Why Join Our Team? Because this is more than an invitation, it's a commitment to offer opportunities for personal and professional growth to everyone! We ask people to grow with us and make the company even better. We provide an excellent benefit package including a full Health Benefits Plan (including medical, dental, and vision) with low-cost premiums, a 401(k) with Company Match, additional Retirement Contributions, and company-paid Life Insurance. How to Apply If you are qualified and would like to join our team, please apply in person Monday through Friday from 8am to 4pm. Let’s talk! Sierra Pacific Industries 90201 Hwy 99 N Eugene, OR 97402 (541) 762-3000 or apply online and view all our career opportunities at: spi.careers Celebrate our 300th million seedling planted with us! spi-ind.com/OurForests/ThreeHundredMillion Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans. About Our Company Sierra Pacific Industries is a fourth-generation family-owned company based in Northern California that started in 1949 and has grown to be one of the largest lumber and millwork producers in the U.S., employing around 6,500 crew members. Sierra Pacific continues to be a company where its employees are proud to work at state-of-the-art facilities and others strive to become part of the team. We own and sustainably manage more than 2.4 million acres of timberland in California, Oregon, and Washington. Our forests are sustainably managed under a 100-year plan by Registered Professional Foresters, Wildlife Biologists, Botanists, and other professionals. We are growing forests for our future, planting over 6 million new trees every year. In Spring 2024, we planted our 300 millionth seedling on our timberlands. This milestone was decades in the making, reflecting our commitment to sustainable forest management and ensuring we have forests not just for today, but for generations to come. Sierra Pacific effectively uses nearly 100% of every piece of wood we bring to our facilities. In fact, any small amount that isn't turned into hand-crafted doors and windows, millwork, lumber, or landscaping material is actually converted into electricity in our eight biomass-fueled power plants. We are proud that all Sierra Pacific facilities follow our drug-free and tobacco-free policies. As part of our safety in the workplace policy, an offer of employment is subject to a negative drug screen result. We use E-verify to verify the social security number and work authorization of all newly hired employees. Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans.

Join Our Team! Master Class RVIA Technician Wanted! Are you a seasoned RVIA technician looking for a dynamic opportunity? Sutton RV is seeking a Master Class RVIA Technician to join our team! If you have a passion for recreational vehicles and a knack for problem-solving, we want to hear from you. Benefits: Comprehensive benefits package including dental, health, and vision insurance. Paid time off to recharge and enjoy life outside of work. Retirement plan to ensure your future is secure. Our team receives ongoing factory training to stay up to date on the latest models, features, and technologies Responsibilities: Conduct diagnostic tests on RV systems and components. Perform repairs and maintenance on various RV models. Uphold safety standards and regulations in all work performed. Provide excellent customer service and support. Requirements: RVIA certification. Proven experience as an RV technician. Strong problem-solving skills and attention to detail. Excellent communication and interpersonal abilities. Ability to work independently and as part of a team. If you're ready to take your career to the next level and join a supportive team environment, apply now to become our next Master Class RVIA Technician at Sutton RV! Reply with your resume.

Seeking a reliable individual that can show up on time daily, absolutely must have a valid drivers license and there own means of transportation. Having experience with driving a truck and trailer is a bonus as well. Can work independently, one that is a hard worker with a go get it done speed. This position requires good common sense, can see what needs done and do it. Must have experience with concrete work and be able to pull a screed or rod board. Also looking for someone that has experience finishing steps and stoop tops. Must be able to work in concrete and masonry. Also would be willing to hire a part time finisher. Contact Tim by texting (best) or by calling, 402/612-8542. Work Monday-Friday some Saturdays are required. Pay is based on work experience and reliability.

Job Description The Insulation Helper/Installer is an entry to mid-level crew member who supports the Lead Installer in executing spray foam insulation projects. This role is responsible for prep, setup, assistance during spray application, cleanup, and general site support to ensure jobs are completed efficiently, safely, and to company standards. Responsibilities - Assist Lead Installer with daily spray foam operations - Prepare job sites (masking, covering windows, sealing openings, staging materials) - Install fiberglass, Rockwool, and blown-in insulation (training provided if needed) - Load, unload, and organize spray foam equipment and materials - Monitor hoses, spray gun, and machinery during operation - Maintain cleanliness of job site, rig and equipment - Ensure waste disposal and recycling of used materials is handled properly - Refuel generators as needed each day (company pays for fuel) - Occasionally run to our distributors or Home Depot for materials - Complete end-of-day checklist with Lead Installer Required Skills - Must have valid drivers license and clean driving record - Reliable transportation to and from job sites each day (truck required) - Prior construction or trade experience helpful but not required - Use common hand tools such as knives, scissors, saws, and staple guns - Comfortable working in tight spaces, attics, crawlspaces, and on ladders - Strong teamwork and communication skills - Willingness to learn spray foam techniques and advance within company Job Type: Full-time Pay: $750.00 - $875.00 / week ($16-19/hr) If you have the skills and qualifications required for this position, we encourage you to apply.

Better Business Staffing LLC., dba BBS. Overhead Garage Door Installer (with Welding Experience) Bring your mechanical know-how and customer-first mindset to a team that values craftsmanship and safety. As an Overhead Garage Door Installer, you will install, service and repair residential and commercial doors and openers. Diagnosing issues, aligning tracks and springs, and ensuring smooth, secure operation on every job. Each day offers variety, problem- solving and the satisfaction of seeing your work make a visible difference for customers, Install, service, and repair residential and commercial overhead/rolling steel doors, door operators, and dock equipment. Fabricate and weld brackets, frames, and supports as needed. Ensure safe, code-compliant, high-quality work and excellent customer service on every job. Key Responsibilities: • Installation: Install sectional and rolling steel doors, high-speed doors, fire doors, grilles, dock levelers, seals/shelters, and door operators. Set tracks, torsion/extension springs, cables, drums, hinges, rollers, bearings, and shaft assemblies. Align, balance, and commission doors and operators; program remotes, keypads, photo-eyes, safety edges, and control stations. Layout, measure, cut, and anchor angle iron, strut, and tracks to steel, masonry, or wood; drill and set mechanical or epoxy anchors. • Service and Repair: Diagnose and correct issues with springs, cables, operators, controls, limit settings, and safety devices. Perform preventive maintenance and safety inspections; complete fire door annual drop tests per NFPA 80/105 and document results. Emergency after-hours service on a rotational basis as needed. • Welding and Fabrication: Fabricate/repair brackets, frames, track supports, and header/angle assemblies using MIG (primary), Stick, and/or TIG. Weld and fit light structural components, 10–3/8" thickness typical; cut, grind, and finish to spec. Read/interpret shop drawings and blueprints; verify field measurements and adjust/fabricate accordingly. • Safety and Compliance: Follow OSHA, company safety policies, lockout/tagout, fall protection, and rigging best practices. Ensure installations comply with UL 325, DASMA, IDA guidelines, and manufacturer requirements. Maintain clean, safe, and organized job sites and vehicles. • Documentation and Customer Service: Use mobile apps to capture photos, job notes, parts/labor, and customer signatures. Communicate clearly with customers, contractors, and the office regarding scope, change orders, and timelines. • Tools and Equipment: Operate scissor/boom lifts, forklifts, hoists, drills, impact drivers, torque wrenches, grinders, band saws, torches, and welding machines. Perform basic maintenance on tools and welding equipment. Qualifications: • Experience: 2+ years as an overhead/garage door installer or technician; commercial experience preferred. 1+ year hands-on welding/fabrication (MIG required; Stick/TIG a plus). 2-5 years of commercial overhead garage door experience essential Service-oriented. Punctual and detail oriented. Willing to learn and grow with the company. Must be mechanically and/or electrically inclined. Welding and torch cutting experience. Forklift proficiency necessary. • Technical Skills: Proficient with torsion/extension spring systems, shaft assemblies, and door/operator alignment. Comfortable with electrical low-voltage terminations, limit adjustments, photo-eyes, and safety circuits. Ability to read blueprints, wiring diagrams, and interpret manufacturer manuals. Competent in measuring, leveling, squaring, and layout; concrete/masonry anchoring. Licenses/Certifications (preferred or willing to obtain): Valid driver’s license with clean MVR; DOT medical card as required. OSHA 10/30, aerial lift, and forklift certifications. AWS D1.1 or equivalent welding certification preferred. IDA/DASMA/Manufacturer certifications a plus. NFPA 80 drop-test training a plus. Soft Skills: Strong troubleshooting and problem-solving; detail-oriented and safety- focused. Professional communication and customer service; team player. Able to work independently with minimal supervision. Service, repair, and install loading dock levelers, sectional overhead doors, rolling steel doors, commercial high-speed doors, etc. Confirm daily work orders with dispatch. Retrieve products from suppliers. Safely transport and deliver products to job sites. Inspect the job site to confirm any potential issues. Install products efficiently and professionally. Deliver great customer service. Executes safety forms and procedures on all job sites. Work on ladders at all heights (8' - 24') as well as scissor lifts and aerial platforms up to 40’. Remove and haul off old doors and openers. Physical Requirements and Work Conditions: Lift and carry 75+ lbs., frequent bending, kneeling, and overhead work. Comfortable working at heights on ladders, scaffolds, and lifts. Work indoors/outdoors in varying weather, exposure to noise, dust, and metal fabrication environments. Use of PPE including gloves, eye/ear protection, respirators as required. Schedule and Travel: Full-time; typical Monday–Friday with occasional overtime and on-call rotation. Monday through Friday, 7 am to 3:30 pm. Competitive hourly wage is $28.00 to $34.00 per hour plus overtime. Must be a U. S. Citizen. Must pass a background check, absolutely no felonies and pass a drug screen test.