Browse
···
Log in / Register

Production Worker / Installer - Trabajador de Producción / Instalador (Cumming)

$17/hour

2440 Honeysuckle Ln, Cumming, GA 30040, USA

Favourites
Share
Some content was automatically translatedView Original
Description

Position: Production Worker / Installer – Hybrid Position Starting Pay: (negotiable on experience) We are currently seeking motivated and reliable installers to join our team! Our company specializes in manufacturing and installing sports facility products, including netting, padding, and windscreens. Key Responsibilities: • Install manufactured products at various job sites. • Assist with product fabrication of our customer products and support our warehouse production team. • Maintain job site safety and follow all company policies and procedures. Position Requirements: • Valid Georgia Driver’s License. • Willing and able to travel out of state as needed. • Pass a background check and drug screening. • Physically fit to handle construction-type work (lifting up to 45 lbs., pulling, standing, bending, etc.). • Comfortable working in outdoor conditions (heat, rain, etc.). • Comfortable working in warehouse conditions (can be affected by outdoor weather conditions & climate). • Understanding and knowledge of measurements and basic math. • Experience with small power tools (e.g., drills, saws, paint guns). • Attention to details such as verifying measurements, color matches, straight cuts, etc.). • Capability to follow instructions and work as a team or individual (as needed). • Minimum of 2 years’ experience in manufacturing or construction. • Bilingual (English/Spanish) preferred. Schedule: • Monday to Friday, 8:00 AM – 4:30 PM • Must be flexible with hours depending on job site needs. Benefits Include: • IRA retirement plan • Health, dental, and vision insurance • Paid vacation Posición: Trabajador de Producción / Instalador – Posición Híbrida Pago Inicial: (negociable según experiencia) Actualmente estamos buscando instaladores motivados y confiables para unirse a nuestro equipo. ¡Nuestra empresa se especializa en la fabricación e instalación de productos para instalaciones deportivas, incluyendo mallas, acolchonados y cortavientos! Responsabilidades Clave: • Instalar productos fabricados en varios sitios de trabajo. • Apoyar en la fabricación de productos personalizados y colaborar con el equipo de producción en el almacén. • Mantener la seguridad en el lugar de trabajo y seguir todas las políticas y procedimientos de la empresa. Requisitos del Puesto: • Licencia de Conducir válida del estado de Georgia. • Disposición y capacidad para viajar fuera del estado cuando sea necesario. • Aprobar una verificación de antecedentes y prueba de drogas. • Condición física adecuada para realizar trabajos de construcción (levantar hasta 45 lbs., jalar, estar de pie, agacharse, etc.). • Comodidad trabajando en condiciones al aire libre (calor, lluvia, etc.). • Comodidad trabajando en condiciones de almacén (puede estar sujeto a condiciones y clima exterior). • Comprensión y conocimiento de mediciones y matemáticas básicas. • Experiencia con herramientas eléctricas pequeñas (ej. taladros, sierras, pistolas de pintura). • Atención a los detalles como verificación de medidas, combinación de colores, cortes rectos, etc. • Capacidad para seguir instrucciones y trabajar en equipo o de manera individual (según sea necesario). • Mínimo 2 años de experiencia en manufactura o construcción. • Bilingüe (inglés/español) preferido. Horario: • Lunes a viernes, 8:00 AM – 4:30 PM • Debe ser flexible con los horarios dependiendo de las necesidades del sitio de trabajo. Beneficios Incluyen: • Plan de jubilación IRA • Seguro médico, dental y de visión • Vacaciones pagadas

Source:  craigslist View Original Post
Location
2440 Honeysuckle Ln, Cumming, GA 30040, USA
Show Map
craigslist

You may also like

Craigslist
Aerospace job openings (Mukilteo)
The best aerospace manufacturing company is looking only for the best candidates. A rapidly growing aerospace manufacturing and finishing company in the Everett-Mukilteo area is expanding and opening another division. We are immediately hiring for the following positions: 1. Chemical Processing: Anodizing (Sulfuric and Boric Acid), Chemical Treatment. 2. Painting: Primers and Decorative Topcoats 3. Administrative/Management: Planning, Purchasing, Inside/Outside Sales Representative, Customer Service, Contract Review. 4. Quality and Inspection: Final Inspection, In-Process Inspection, Auditing, and Non-Conformance Management 5. Plastic Molding Machine Operators 300 ton. The ideal candidate must have experience interpreting shop travelers, military specifications (mil-specs), and technical drawings. Strong communication skills and familiarity with AS9100, Boeing standards, and NADCAP requirements are essential. You will be joining a highly dynamic company that fosters personal growth and accountability. If you are a dedicated team player, this is an excellent opportunity for you. We offer the best workplace, a clean environment, a comprehensive benefits package, and a competitive salary.
8616 Mukilteo Speedway, Mukilteo, WA 98275, USA
$25-45/hour
Craigslist
Welder Wanted - Full Time (Maple Valley)
Maple Valley playground manufacturer is looking for a full time welder/fabricator. We are a small shop with a great bunch of employees. Must be punctual and reliable. For more information, please call Sam 206-793-7529
24221 214th Ave SE, Maple Valley, WA 98038, USA
$24/hour
Craigslist
CNC Machine Operator - Night Shift (morgan hill)
Kalman Manufacturing of Morgan Hill, California is a Silicon Valley leader in high-precision manufacturing with a diverse customer base, ranging from medical to global positioning systems. We work closely with our customers to design, develop, and process plan products from prototypes through production. Currently, we have multiple positions for CNC Operators on our Night Shift. (4:00pm-2:00am Monday thru Thursday) Our night shift employees enjoy 3 day weekends! Our company is looking for employees who are reliable and easy to work with, have a positive attitude, and have good communication and organizational skills. Our night shift Operators MUST HAVE at least 3-5 years experience operating CNC Machines. This person should be capable of high-precision work, while acting as a team player. Must be able to inspect your own parts. THIS IS NOT AN ENTRY LEVEL CNC POSITION. Skills Required • Should be High School Graduate or GED equivalent. • Must have experience with Vertical or Horizontal Machining Centers to operate in a safe and efficient manner. • Preferably candidates will have a minimum of 3 years of experience. • Must have good communication skills both written and verbal. • Must be able to use standard measuring tools effectively. • Must have adequate math skills. • Must be very detailed oriented with good personal organizational skills. • Must be familiar with tooling, fixturing, indexers etc. • Must be able to complete inspection documentation and determine when parts are out of tolerance. • Should be able to train other operators in the process of manufacturing parts. • Must have good manual dexterity and be able to lift 70lbs. • Should have experience in an ISO 9001 environment, 13485 would be helpful. We offer competitive pay, great benefits! 100% of the employee premium is PAID (on a silver health plan) 401(k) with matching, PAID VACATION, PAID HOLIDAYS All in a friendly, family -owned, professional and clean work environment. please reply with a resume to be considered. Only experienced candidates who are available for NIGHT SHIFT will be considered.
780 Jarvis Dr #100, Morgan Hill, CA 95037, USA
$23-27/hour
Craigslist
Electro-Mechanical Assembly Technician (santa clara)
Job description: Electro-mechanical assembly of standard company products and automation products. Essential Duties: This individual will be responsible for building automation products from the ground up. Position is responsible for verifying kits are complete, building wiring and testing. Will mechanically assemble equipment, following schematics electrically wire the equipment and then set-up and certify equipment performs properly. will work with engineering to reline prints to improve design and to make product more manufacturable. Requirements: - 3+ years relevant experience required. - Knowledge of basic hand tools and good electrical practices. - Must be able to read assembly drawings and electrical schematics. - Understand how to read electrical schematics and use manufacturers’ product data sheets. - Understanding and following work instructions and procedures. - Experience in a manufacturing environment and familiar with standard manufacturing processes. - Reliable and quality-minded individual is required. - Strong troubleshooting skills. - Good communication skills both written and spoken English are required. - Work on-site, on time and on a consistent working hours as scheduled. - Must possess the core qualities of reliability, strong work ethic, and responsibility. - Ability to pass a personal background check and/or clearance at time of hire. - Must be legally authorized to work in the United States. No sponsorship for this position. Physical Requirements: - Ability to work standing up for 50% of time - Ability to lift 30 pounds - Ability to use mechanical hand tools (screwdrivers, pliers, wire strippers, crimping tools.) - Ability to use electrical tools (drills, heat gun, label printers) - Must be a team player * Qualified applicants should email their resume (must) and provide their email addresses. Job Type: Full-time Pay: $20.00 + (DOE) per hour + benefits Expected hours: 40 per week Benefits: 401(k), Health insurance, Dental insurance, Life insurance, Vision insurance, Paid time off, Year-end bonus. 90 days probation. Schedule: 8 hour day shift / Monday to Friday
2173 Hunter Pl, Santa Clara, CA 95054, USA
$20/hour
Craigslist
Manual Machinist - manufacturing machine shop (santa clara)
Manual Machinist Manual Machinist is responsible for supporting machine setup, production, and troubleshooting. These components use a variety of materials and have tightly controlled dimensional and surface finish requirements. PREFERRED SKILLS AND EXPERIENCE: • Complete machining operations from blueprints, drawings and/or verbal instructions. • Maintain specifications by working with complex, tight tolerance parts and various materials. • Experience with manual lathes, knee mills, and various other manual equipment a plus. • Perform proper and complete station cleanings daily and on a job-by-job basis. • Low Volume/High Mix, and High Volume/Low Mix • 3+ years of experience in Set-up and Operation (experience on Lathe required.) • Experience with machining different materials (e.g. aluminum, stainless, titanium, plastics etc) • Ability to lift 25 lbs. unassisted, repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting, exposure to typical manufacturing chemicals (coolant, solvents, cleaners) are generally required to perform the functions of this position. • Able to stand for extended periods of time. • Provide feedback and support to Production Engineers to optimize machining sequences and process. • Strong work ethic and sense of urgency. • Must possess the core qualities of reliability, strong work ethic, and responsibility. • Excellent communication and problem solving skills. • Read, written and spoken English are required. • Work on-site, on time and on a consistent working hours as scheduled. • Attention to detail. • Self-starter. - Ability to pass a personal background check and/or clearance at time of hire. - Must be legally authorized to work in the United States. No sponsorship for this position. Job Type: Full-time Pay: $20.00+ per hour (Depends on Experience) + Insurances + Bonus + PTO Work Schedule: Monday to Friday 6:30am - 3:00pm 90 days probation * Qualified applicants should email their resume (must) and provide their email addresses.
2173 Hunter Pl, Santa Clara, CA 95054, USA
Negotiable Salary
Craigslist
Senior CNC Machine Operator - Horizontals (morgan hill)
Senior CNC Operator - HORIZONTAL MILLS - DAY SHIFT (Morgan Hill) Kalman Manufacturing of Morgan Hill, California is a Silicon Valley leader in high-precision manufacturing with a diverse customer base, ranging from medical to global positioning systems. We work closely with our customers to design, develop, and process plan products from prototypes through production. Our employees enjoy a great reverse commute to our clean Morgan Hill facility! Kalman Manufacturing of Morgan Hill, California is a Silicon Valley leader in high-precision manufacturing with a diverse customer base, ranging from medical to global positioning systems. We work closely with our customers to design, develop, and process plan products from prototypes through production. We have openings for qualified people in the industry to join our team. We are searching for a Senior CNC operator with 3-5 years’ experience operating horizontal mills. Requirements: Senior Operators should be able to manage a job independently after set up from start to finish with little to no supervision and have the required trouble shooting skills to solve problems before resorting to escalation. Must be able to make their own off-sets and understand different off set types Must understand cutter comp Must demonstrate the ability to understand a blue print; comprehend a part and its features from the print Must be able inspect their own work and demonstrate attention to detail when inspecting parts and recognize cosmetic defects. Demonstrate understand the types of cosmetic failures. Our company is looking for skilled machine operators who are reliable and easy to work with, have a positive attitude, and have good communication and organizational skills. This person should be capable of high-precision work, while acting as a team player. Day shift employees work Monday through Thursday 6:00AM to 4:30PM. If you meet the above qualifications please reply with a resume. Our company is looking for skilled machine operators who are reliable and easy to work with, have a positive attitude, and have good communication and organizational skills. This person should be capable of high-precision work, while acting as a team player. Day shift employees work Monday through Thursday 6:00AM to 4:30PM and enjoy 3 day weekends! We offer excellent benefits! 100% of the employee health premium is PAID (on a silver health plan) 401(k) with matching, PAID VACATION, PAID HOLIDAYS All in a friendly, family-owned, professional and clean work environment. Enjoy an easy reverse commute from Silicon Valley! If you are a highly skilled machine operator and meet the above qualifications, please reply with a resume.
455 E Main Ave, Morgan Hill, CA 95037, USA
$21-27/hour
About Us
Terms of Use
Privacy Policy
Help
Contact Us
FAQ
Cookie
Cookie Policy
Cookie Settings
Our Apps
Download
Download on the
APP Store
Download
Get it on
Google Play
© 2025 Servanan International Pte. Ltd.