Industrial Sewer (NE Portland)

We currently have your next step in your career! We are seeking an energetic individual with a keen eye to detail and a positive attitude for this role. The successful candidate will be focused on safety, quality, and continuous improvement while fulfilling the role of Industrial Maintenance Technician.   This role is based in our facility in Kingman, AZ, and will report to the Maintenance Supervisor. Do not miss the opportunity to join an engaging team of people-centric professionals, leaders, problem solvers, and entrepreneurs! Job Responsibilities Work with a variety of electrical, pneumatic and electronic instruments to measure and control variables such as pressure, flow, temperature, level, composition. Calibrate, repair, maintain and adjust system components, and install and maintain instruments and controls on new or existing equipment. Experience with, but not limited to: changing electric motors, water/vacuum pumps, gear boxes Plastics/Extrusion experience a plus Requirements Requirements Experienced Maintenance Technician with 5+ years of hands-on maintenance experience, preferrable in a manufacturing environment Must have strong, logical decision-making skills along with solid time management and multi-tasking skills Must possess strong mechanical aptitude Ability to remain professional under pressure and exhibit a positive attitude. Exhibit sense of ownership and accountability Ability to communicate effectively in English both written and verbally Knowledge of Health and Safety practices with excellent housekeeping and organizational skills Perform various other duties as assigned by Supervisor Working Conditions Requires a high degree of mobility and involves considerable routine walking, standing for long periods, reaching, twisting, bending, climbing, and lifting to 50-75 lbs. Fast-paced environment where a considerable amount of sensory attention is required. Personal safety is affected by exposure to heat, cold, dust, noise levels and the use of sharp tools.   IPEX is an equal opportunity employer committed to providing accommodations for people with disabilities throughout the recruitment process and, upon request, will work with qualified job applicants to provide suitable accommodation in a manner that considers the applicant’s accessibility needs due to disability. Accommodation requests are available to candidates taking part in all aspects of the selection process for IPEX jobs. To request an accommodation, please contact HR at HR@ipexna.com.   Benefits Pay: $27 - $34 per hour (DOE) The position is a Full-Time, Permanent Position with Comprehensive Benefits 8 paid holidays every calendar year Plant annual bonus program Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Family Leave (Maternity, Paternity) Short Term & Long Term Disability Training & Development Wellness Resources 401K plan with company matching up to 5%. Basic safety equipment (i.e., safety glasses, ear plugs) will be provided. IPEX is an equal opportunity employer committed to providing accommodations for people with disabilities throughout the recruitment process and, upon request, will work with qualified job applicants to provide suitable accommodation in a manner that considers the applicant’s accessibility needs due to disability. Accommodation requests are available to candidates taking part in all aspects of the selection process for IPEX jobs. To request an accommodation, please contact HR at HR@ipexna.com.

Kelly is now hiring at assembly workers in Springfield, TN! We have 1st, 2nd shift opportunities available.  MUST BE FLEXIBLE.  Pay is $18.00-$21.00 per hour.    Job Details:   Assembles various parts on an assembly line to create a completed functional product using their hands and various air tools that meet or exceed both our customers and the company’s expectations in quality. The positions are long-term Temp-To-Hire.    Requirements:  • Ability to bend, stoop, grip, reach and lift 40 lbs. on a repetitive basis.  • Ability to stand up for 8 to10 hour periods at a time.  • Able to work where insulation is present.  • Ability to perform assigned tasks on a moving assembly line within the  time-restricted breakdown designated for that task.    If interested please email marb621@kellyservices.com

Seal & Design, Inc. is a family owned company founded in Clarence, NY with three divisions located across the U.S. and Canada. Our product line includes gaskets, o-rings, seals, molded products, die-cut foams, and many other specific products for all kinds of sealing applications. We provide superior products to our customers across many industries, including: Automotive, Medical, Military, Aerospace, Electronics, Power Generation, Hydraulics, and HVAC. We are looking for a Production Associate to join our team, on first shift! Monday - Friday- 6:00 AM - 2:30 PM Pay range: $21- 24/hour Overview: Fabricate orders according to job specifications with an eye towards process improvement, quality and meeting or exceeding job productivity and efficiency standards. Responsibilities: Operate machinery safely according to company policies Perform secondary inspection and advise supervisor of shortfalls in quality and temporarily suspends sorting until issue is resolved Cross train and assist in other departments as required Requirements To be seriously considered for this role, please have the following regarding: Experience: 1 year of manufacturing experience Education: HS Diploma Skills: Proficiency working in a computer supported environment with business software, basic math and language skills, strong attention to detail Characteristics: Results driven, ability to take initiative and challenge the status quo, ability to meet deadlines and work in a team atmosphere to deliver results Benefits 401(k) Dental insurance Health insurance Life insurance Paid time off Referral program Vision insurance

We are seeking dedicated and hardworking Factory Workers to join our manufacturing team. In this role, you will be responsible for various tasks that contribute to the production process, ensuring high-quality standards and efficiency. Ideal candidates should be able to work in a fast-paced environment and demonstrate a commitment to safety and teamwork. Responsibilities Assist with daily production tasks on the factory floor. Organize and stage materials for production and shipping. Prioritize and prepare customer orders for on-time shipment. Safely operate a forklift to move materials and load/unload trucks. Keep work areas clean, organized, and compliant with safety standards. Stack, strap, and hand-wrap pallets for shipment. Assist with loading inventory onto trucks and unloading inbound goods. Support process improvements and help create efficient shipping systems. Skills Strong attention to detail and ability to follow instructions accurately Basic mechanical skills for operating machinery and troubleshooting issues Good physical stamina, capable of standing for long periods and lifting moderate weights Excellent teamwork and communication skills for effective collaboration with colleagues Ability to adapt quickly to changing tasks and priorities in a dynamic work environment Ability to lift 60–70 lbs repeatedly. Dependable, punctual, and ready to work at shift start. Positive attitude with strong teamwork and communication skills. Ability to work efficiently in a fast-paced, warm, and dusty environment. Join our team today and contribute to the success of our manufacturing operations while developing your skills in a supportive environment. PLEASE EMAIL RESUME WITH WORK EXPERIENCE TO BE CONSIDERED

Objective The Warehouse Supervisor oversees the daily operations of the warehouse, ensuring inventory is accurately accounted for, properly stored, and handled in a safe and organized manner. This role collaborates closely with the management and production teams to support operational goals while maintaining compliance with food safety and regulatory standards. This is a seasonal position. This is a non-exempt position with a hourly pay range of $25-30/hour. Key Responsibilities Warehouse & Production Demonstrate effective communication in a professional and respectful manner. Collaborate with team members to meet company standards and goals. Provide training, direction, and leadership to maintain a successful, safe, and organized work environment. Deliver shift instructions and hold team members accountable for execution and accuracy. Ensure warehouse documentation is completed, accurate, and legible. Plan and direct receiving, labeling, and appropriate storage of inventory. Record and inspect deliveries for compliance with purchase orders. Supervise and operate material handling equipment (e.g., pallet jacks, hand trucks). Stage and organize orders for shipping, production, and storage in accordance with FIFO and company/customer standards. Conduct routine, periodic, and annual inventories with accuracy and precision. Food Safety Implement and enforce departmental procedures and food safety protocols. Ensure compliance with HACCP, GMP, and SQF requirements. Identify and report any food safety concerns to management immediately. Attend all required food safety training. Maintain a clean, organized, and continuously improving warehouse environment. Qualifications 2–5 years of supervisory experience in a food manufacturing facility. HACCP and SQF training preferred; familiarity with GMP, SOPs, and internal policies required. Inventory control proficiency Data entry experience Strong verbal and written communication skills. Ability to function effectively in a fast-paced production setting. Bilingual (English/Spanish) required Physical / Additional Requirements: Maintain great attendance at all times Ability to work late nights or early mornings as required. Ability to stand for extended periods, bend, stoop, and lift up to 50 lbs as needed. Comfortable working in a production environment with varying temperatures and noise levels. Manual dexterity and ability to operate machinery safely and effectively.

Position Responsibilities • Safety and Compliance: Adhere to safety protocols and guidelines to maintain a safe working environment. Comply with all federal, state and company policies, procedures, and regulations related to occupational safety. • Equipment Operations: Safely operate material handling equipment, such as forklifts, pallet jacks, or hand trucks, following established safety guidelines and protocols. Conduct routing maintenance checks on equipment and report any issues or malfunctions. • Quality Control: Inspect materials for damage, defects, or discrepancies. Collaborate with quality department personnel to ensure adherence to quality standards and report any non-conforming materials. Follow proper procedures for handling, storing, and disposing of hazardous materials if possible. • Material Handling: Receive, inspect, and verify incoming materials and supplies against purchase orders or shipping documents. Safely transport materials to designated area using appropriate equipment, such as forklifts, pallet jacks, or hand trucks. Organize and store materials in designated locations for easy retrieval and inventory control. • Documentation and Reporting: Accurately complete all required documentation, such as receiving reports, materials movement logs, and inventory records. Generate reports on inventory levels, stock movements, and other related metrics as requested. Communicate inventory discrepancies, shortages, or delays to the appropriate stakeholders. • Order Fulfillment: Retrieve requested materials from inventory based on work orders or requisitions. Prepare materials for distribution or shipment, ensuring proper packaging and labeling. Coordinate with other departments to fulfill material request in a timely manner and maintain accurate documentation. • SAP knowledge such as inventory management, TO’s, pulls for production and troubleshooting. • Can perform receiving transactions, shipping transactions, consumptions, and reversals. • Ability to utilize Raymond racking system. • SAP knowledge to reprint handling units. • Inventory Management: Maintain accurate inventory records by performing regular stock counts and reconciling discrepancies. Monitor stock levels, identify low inventory situations, and initiate replenishment processes as necessary. Utilize inventory management systems or software to track materials and ensure adequate supply availability. • Cleaning and Sanitization: Perform thorough cleaning and sanitization of all designated areas within the facility, including floors and common areas. • Cleanliness and Organization: Maintain a clean and organized work area, ensuring that materials and equipment are properly stored, and waste is disposed • Perform other duties as assigned. Position Requirements • 3-5 years of experience as a Materials Handler or similar role in a warehouse or manufacturing environment. • Ability to operate material handling equipment, such as forklifts stand up, pallet jacks, or hand trucks, with appropriate certifications if required. • Attention to detail and strong organizational skills to maintain accurate inventory records and manage multiple tasks simultaneously • Knowledge of safety protocols and procedures related to materials handling. • Compliance with health and hygiene standards, including wearing appropriate personal protective equipment (PPE) when required. • Physical stamina and ability to perform repetitive tasks, lift heavy objects, and work in a physically demanding environment. Hours are 3:00pm to 1:30 am Monday to Friday and some Saturdays Background check and Drug test. Please sent your resume! Ameritemps Az LLC 7602 W. Indian School Rd Suite# C5 Phoenix, AZ 85033