CARPET Installers Needed: WEEKLY Pay, Reliable Income

Cloacina LLC manufactures Packaged Wastewater Treatment Systems for municipal and beverage industries. We are currently filling the position of Fabrication Welder Welder / Fabricator Job Duties: Reading engineer blueprints and fabricating to their specifications Cutting, grinding, fitting, and welding together stainless steel tubing, angle iron, and sheets MIG welding stainless steel tanks, with occasional TIG Lifting up to 50 lbs required Operate machinery – forklifts, scissor lift, telehandler NOTICE OF OCCUPATIONAL HAZARDS The wastewater industry can be hazardous due to exposure to biological and chemical hazards, as well as physical dangers like confined spaces, slips, and falls. Employees may come in contact with wastewater which contains human waste. Wastewater contains various bacteria, viruses, and parasites that can cause diseases in humans and animals. Workers can be exposed through contact with wastewater, aerosols containing pathogens, or contaminated equipment. Wastewater treatment processes also involve the use of various chemicals, some of which can be toxic or corrosive. It is imperative that employees wear proper Personal Protective Equipment (PPE) and follow safety protocols. While not mandatory, it is also highly recommended that employees stay current with vaccinations, including Hepatitis A, Hepatitis B, Tetanus, and Diphtheria. Clean, organize, and sort equipment and raw steel Adherence to all safety practices and procedures Personal tools ARE required for the position, lockable storage required as well such as a cart or tool box. (I.e. Basic hand and power tools, wrenches, hammers, layout tools, square, etc.) Ability to work overtime as needed Ability to work with minimal supervision All other duties as assigned We offer excellent wages and benefits. Pay Dependent on Experience. To apply for the position, please reply by email with a resume attached. NOTICE OF WORK ENVIRONMENT & OCCUPATIONAL HAZARDS: The wastewater industry can be hazardous due to exposure to biological and chemical hazards, as well as physical dangers, including but not limited to, confined spaces, slips, falls, wet and/or humid conditions, high and/or low altitude, moving mechanical parts, high and/or precarious places, fumes and/or airborne particles, outside weather conditions, extreme cold, extreme heat, risk of electrical shock, vibration, sewage, epoxy coatings, solvents, and excessive noise levels.  Employees may come in contact with wastewater which contains human waste.  Wastewater contains various bacteria, viruses, and parasites that can cause diseases in humans and animals.  Workers can be exposed through contact with wastewater, aerosols containing pathogens, or contaminated equipment.  Wastewater treatment processes also involve the use of various chemicals, some of which can be toxic or corrosive.  It is imperative that employees wear proper Personal Protective Equipment (PPE) and follow safety protocols.  While not mandatory, it is also highly recommended that employees stay current with vaccinations, including Hepatitis A, Hepatitis B, Tetanus, and Diphtheria.

We are hiring a Project Manager to oversee a 40-unit apartment renovation in Columbus, GA (Phase 1 of a 140-unit community plan). 💰 $70K base + performance bonus 📍 Columbus, GA | Start: 2025 🏗️ Growth opportunity to lead the full 140-unit renovation Responsibilities: • Manage day-to-day renovation of 40 units • Oversee subcontractors & trades (scheduling, quality, compliance) • Ensure safety, budgets, and timelines are met Requirements: • Experience with multifamily or large-scale renovations • Strong scheduling & budgeting skills • Hands-on leader with excellent communication Apply today via email or text or call Mark 410-446-6761

📢 NOW HIRING: Finish Carpenters (Temp-to-Perm Opportunity) 📍 Location: 3087 Victory Drive, Columbus, GA 31903 📞 Contact: 706-324-1780 We are seeking skilled Finish Carpenters to join our team for a Temp-to-Perm opportunity. If you have experience with finish carpentry and the ability to work independently, we want to hear from you! 💲 Pay Rate: $22–$25 per hour (based on experience) 🕒 Schedule: Monday–Friday, 8–10 hour shifts (occasional Saturdays may be required) Job Responsibilities: * Perform finish carpentry including measuring, cutting, framing, and assembly. * Read and interpret measurements with accuracy. * Install trim, moldings, and other finish carpentry elements. * Safely use hand tools, power tools, and carpentry equipment. * Work independently with little to no supervision. * Maintain a clean and safe work environment. Requirements: Must have own tools to perform job duties. Ability to read measurements and cut with precision. Must be able to climb, frame, and perform physical carpentry tasks. Reliable transportation preferred (not required). Strong work ethic and attention to detail. This is an excellent opportunity for a reliable and skilled carpenter looking for long-term employment with growth potential. 👉 To apply, call us today at 706-324-1780 or visit us at 3087 Victory Drive, Columbus, GA 31903.

Busy painting company seeks reliable fully insured painting sub crews to complete interior and exterior projects on the North Shore of MA and Southern NH and The NH Seacoast. Must have : - Workers comp and liability insurance - certificates required up front - Equipment (ladders, sprayers, brushes etc) - Decent non lettered work vehicle (reliable and clean looking) - Ability to travel to southern NH and northern MA - Ability to work legally in the US - Ability to communicate with customers and staff easily - Ability to read and understand contracts and project descriptions - Ability to show up and work normal business hours - Ability to maintain a clean and professional jobsite with proper masking and covering All jobs are residential re-paints, they will require washing, scraping, sanding, caulking, priming and finish coating. We are scheduling interviews at our Hampton, NH office for the Week of 9/8 and 9/15 for immediate hiring through the fall and into 2026

Alderwood Builders LLC is a Veteran owned, Bellingham based general contractor specializing in remodels and additions. We have an immediate opening for an experienced carpenter to join our growing team. Our ideal candidate is reliable, has strong communication skills, and the ability to work as a team member, as well as work independently. Responsibilities: • Interact with team members and clients in a professional manner. • Arrive on time at each project site. • Load and unload necessary equipment and materials. • Review plans and blueprints to ensure understanding of the scope of the project. • Communicate with other construction team members to ensure accuracy of tasks. • Take measurements and calculate the sizes and amounts of materials needed for the project. • Perform all aspects of carpentry including framing, windows, doors, cladding systems, and finish carpentry. • Safely operate and maintain tools. • Maintain a clean, safe work area. • Comply with all company and governmental safety guidelines. Requirements: • Preferred 3 + years of experience in residential construction. • Prefer knowledge of reading and interpreting plans/blueprints. • Pass background check. • Possess reliable transportation. • Have your own hand-tools. • Have cell phone. • Women, minorities, and Veterans are encouraged to apply Compensation and Benefits: • Pay DOE - $25.00 - $40.00 per hour • Medical, dental, vision coverage for employee • Paid holidays • Paid vacation • Employer matched retirement plan We are offering a full-time position, 40 hours a week. We are looking for someone with a positive attitude and willingness to grow and learn within our team. We care about our employees and want to foster a fulfilling experience both in the workplace and in our personal lives. If you are interested in working with us, send your resume with references to scott@alderwoodbuildersllc.com. Resumes without references will not be considered Visit our website: www.alderwoodbuildersllc.com

🔧 Metal Fabricator/Fitter – WABO/AWS 📍 Location: Bellingham, WA 💼 Full-Time | 40–50 Hours/Week 💵 $25.00 – $35.00 per hour ________________________________________ A-1 Welding, a well-established structural steel fabrication shop, is currently seeking a skilled and safety-conscious Fitter/Fabricator to join our growing team. This position is ideal for a detail-oriented fabricator with shop welding experience and a strong work ethic. ⚠️ WABO/AWS Certification is preferred ________________________________________ 🔩 Key Responsibilities: • Read and interpret shop drawings and blueprints • Perform basic metal fabrication tasks: cutting, grinding, drilling, shearing, and fit-up • Weld using dual shield process (FCAW-G) • Maintain a clean, organized, and safe work environment ________________________________________ ✅ Qualifications: • WABO Certification – Preferred • AWS Certification – Preferred • At least 5 years of welding and fitting experience • Ability to lift 50 pounds • Flexible schedule and willingness to work overtime as needed • Strong commitment to workplace safety ________________________________________ 🎁 What We Offer: • Competitive wages: $25.00 – $35.00/hour • Medical, Dental, Vision, and Life Insurance (after 60 days) • Holiday Pay & Vacation Pay • Sick Leave in accordance with Washington State law • Simple IRA Retirement Plan (after 48 months) • 401(k) with matching • Opportunities for advancement ________________________________________ 📝 How to Apply: Submit your resume to Kathy at: 📧 kathy@a1weldinginc.com Or apply in person at: 🏢 4000 Irongate Rd., Bellingham, WA ________________________________________ Join a team that values skill, safety, and craftsmanship. If you're a certified professional who takes pride in your work, we want to hear from you!