Forklift Operator

Parallel Employment is looking for skilled Plastic Injection Mold Machine Operators to join our dynamic team in Wyoming NY. The ideal candidates should have experience in setting up and operating plastic injection molding machines while ensuring product quality and safety standards are met. You will play a crucial role in the manufacturing process, contributing to the production of high-quality plastic products. We value dedication, attention to detail, and a commitment to excellence in all our team members. Eagerly hiring for 1st, 2nd and 3rd shifts. Pay rate starts at $16.50 pay differential is paid for 2nd and 3rd shifts! Responsibilities Set up and operate injection molding machines Monitor the production process and adjust machines as necessary Inspect products for defects and ensure they meet quality standards Perform routine maintenance on machines Follow safety regulations and company policies Communicate effectively with team members and supervisors Requirements High school diploma or equivalent Previous experience as an injection mold operator or similar role Ability to read and interpret technical documents and manuals Strong attention to detail and problem-solving skills Ability to lift up to 50 pounds and stand for long periods of time Must have reliable transportation Benefits We are an equal opportunity employer #ind456

About the Role:  We are seeking a CNC Mill-Lathe Machinist to join our 2nd shift team. Responsible for the setup, Mazatrol programing, operating, and inspection of the final product, ensuring it is free from defects and ready for the next production stage.     Responsibilities include:  Day to day operation of CNC milling and Lathe machines following work lists, shop routers or direction from immediate supervisor while maintaining work schedule with a goal of improving safety and/or production.  Operator is responsible for all set up, programming.   Basic programming knowledge of machine being hired for (Mazak or Okuma).  Write programs for basic parts.  Set-up tooling prior to running part and recognize potential tool interference.  Demonstrate the ability to learn back setup.  Operate overhead cranes, clamping devices.  Perform similar and related duties as assigned by supervisor.  Maintain clean and safe work area.  Complete tasks timely and efficiently in accordance with expectations as directed by supervisor.  Able to operate tools including but not limited to, hand tools, manual machine tools, torch, drill press, etc.  Ability to learn Eriez labor and work order collection system.  Notify supervisor when faulty equipment or defective materials are discovered.  Requirements High school diploma OR GED  Skill or experience with Mazatrol programing  Program, set up and operate horizontal and vertical CNC machining centers including the setting of all tooling and fixtures, proper feeds and speeds, using both carbide and high-speed steel tools.  Able to read and interpret engineering drawings and use Advanced mathematics and formulas.  Use a variety of precision measuring instruments with proficiency.  Experience in programming and operating, (acknowledged training preferred) using Mazatrol or conversational control systems to create programs from engineering drawings.  Ability to learn machining processes through formal training, including knowledge of materials, feeds, speeds, tooling, inserts, coolant, drills, taps, etc.  Benefits 401(k) Employer 401(k) matching Dental insurance Disability insurance Flexible spending account Health insurance Health savings account Life insurance Paid time off Tuition reimbursement Vision insurance Hourly pay Range: $23.23/hr. to $25.55 (commensurate with experience) + 6% second shift differential premium Eriez is an Equal Opportunity Employer. Our policy is clear: there shall be no discrimination on the basis of age, disability, sex, race/ethnicity, religion or belief, gender reassignment, marriage/civil partnership, pregnancy/maternity, or sexual orientation.   We are an inclusive organization and actively promote equality of opportunity for all with the right mix of talent, skills, and potential. We welcome all applications from a wide range of candidates. Selection for roles will be based on individual merit alone.

Job Title Mold Setter/Technician Location: 18 1/2 Mile Road, Sterling Heights, MI Job Type: Full-Time Shift: 2nd Shift (3:00 PM - 11:00 PM) Wage: $21.00 - $24.00 per hour, plus a $0.75 afternoon shift premium Position Summary We are seeking a skilled Injection Molding Technician to support production operations through mold changes, equipment maintenance, material handling, and process troubleshooting. This hands-on role plays a critical part in ensuring manufacturing efficiency, product quality, and operational safety in a fast-paced injection molding environment. Key Responsibilities Perform mold changes efficiently and document mold change times. Maintain and manage regrind material systems. Change materials as needed and clean oil and water from work areas. Assist with troubleshooting and adjustments on injection molding machines, including robotic and end-of-arm tooling. Support machine operators and provide coverage during breaks. Work with maintenance staff to assist in mechanical, hydraulic, and pneumatic repairs. Monitor and assess molding processes for quality and consistency. Maintain cleanliness of the plant and follow all safety and environmental procedures. Verify and complete Process Verification (PV) documentation as required. Participate in continuous improvement initiatives and problem-solving activities. Support compliance with ISO 9001:2015 and IATF 16949 standards. Requirements Qualifications High School Diploma or equivalent; Technical or vocational training is a plus. Minimum of 1 year of experience in injection molding, mold setting, or similar manufacturing roles. Knowledge of injection molding processes and machinery. Familiarity with mechanical, hydraulic, and pneumatic systems. Strong troubleshooting and problem-solving skills. Ability to read and interpret blueprints and technical drawings. Experience with robotic systems and end-of-arm tooling is a plus. Good communication skills and ability to work in a team environment. Strong attention to detail and focus on quality. Physical Demands Ability to lift and move materials or components up to 50 lbs. Ability to stand, bend, and work in a manufacturing environment for extended periods. Must be able to work in a fast-paced environment and manage multiple tasks. Benefits Benefits Medical, Dental, Vision, and Prescription Drug Coverage Paid Time Off (PTO) and Holidays 401(k) Retirement Plan with Employer Match Life Insurance Tuition Assistance Safety and Wellness Programs

At Hamilton Kent, exceeding customer expectations is what motivates us every day. Our products make infrastructure more watertight, durable and sustainable. We are committed to providing the highest quality elastomer products and services to our customers through continuous improvements, innovation, and respect for the environment. Founded in 1943 in Kent, Ohio, Hamilton Kent has grown to be a multinational manufacturer and distributor of resilient-rubber, watertight, sealing systems and components. Focusing primarily on seals for infrastructure pipe systems, we provide a complete package – from design and development, through production and testing, to warehousing and shipping. We currently have an exciting career opportunity as an Extrusion Operator! This role is based in our facility in Winchester, Tennessee, and reports to our Production Supervisor. The successful candidate will ensure that extruded product meets specified requirements as well as adhering to safety expectations. Job Summary We are seeking a dedicated individual to be responsible for the efficient and accurate process of producing various rubber profiles from raw material with microwave or heated water curing. This role requires attention to detail, adherence to best practices in machine operations, contributing to teamwork and respecting all policies as outlined in the employee handbook. Work Schedule: Monday-Wednesday, 7PM – 7AM Pay: $18.64 + $1 shift differential Requirements Monitor and verify the quality of the extruded profile. Ensure that the compound is entering the extruder continuously and smoothly. Ensure all dimensions are within product specifications. Trouble shoot extrusion process & interact with Maintenance in resolution of equipment problems. Make regular checks on the water level in the cooling tank and ensure that the profile is centered on the hot air tunnel belt. Ensure samples are available for the Q.C. Inspector and measurements are done to the specified frequencies. Pack or cut to the cut length specifications the extruded profile as instructed. Ensure printing and logo is correct and is in accordance with the drawing. Follow quality procedures, document, and record all required process control information. Must be eager to learn, excited to work on a team, and have good written and verbal communication skills Other duties as the need arises and/or assigned. Qualifications & Experience Must be 18 years of age or older. High School diploma or equivalent experience. Must be able to use or can be trained on various types of measuring tools related to our stamping and gasket manufacturing process. Demonstrates the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to read, write and comprehend sophisticated instructions, correspondence, and reports. Requires good mobility and involves considerable lifting (less than 35 lbs.), pulling, bending, standing and walking. Working conditions The incumbent in this role spends almost 100% of their time in the plant environment, which may involve varying degrees of physical labor such as standing and walking for long periods of time, lifting, pushing and pulling. Incumbent will use standard personal protective equipment such as, but not limited to, safety shoes, safety glasses, gloves, and aprons. Incumbent understands, respects and adheres to the workplace Health & Safety rules & regulations which are derived from the Occupational Health & Safety Act. Benefits Health Insurance Dental Insurance Vision Insurance Life Insurance 401(k) Retirement Referral Program Hamilton Kent is committed to providing accommodations for people with disabilities throughout the recruitment process and, upon request, will work with qualified job applicants to provide suitable accommodation in a manner that takes into account the applicant’s accessibility needs due to disability. Accommodation requests are available to candidates taking part in all aspects of the selection process for Hamilton Kent jobs.

Job Title: Heat Treat Operator Furnaces: 4 Location: Warren MI Shift: 1st  Pay: 23.31 to start. Pay raises coming soon due to union negotiations Summary Will perform operations in the Heat Treat area as assigned. Essential Duties and Responsibilities ·         Conduct light duty maintenance, to have furnaces available for processing work orders (confined space work will be subcontracted to vendor base).  Maintenance includes maintaining flow scopes in good order and minor electrical trouble shooting and repairs – i.e replacing heating elements.  ·         Read work tickets generated in the lab  ·         Group parts to be processed together as permissible  ·         Make up loads to process in the furnaces, either manually or using a hoist  ·         Using a roller cart, transfer a tray with a basket of parts on it, to the furnaces and push the load into the furnaces.  ·         Set the furnace cycle, times, atmospheres and monitor the progress of each cycle in each furnace.  ·         When the cycle is completed, reverse the motions to unload parts back into the original containers.  ·         Copper plate small parts (i.e. retainers), through progressive tank dipping on the plating line and dip strip the copper when the cycle is completed.  ·         Charge and discharge the chromizing furnace once per day in the moor – this requires loosening and then retightening 8 bolts on each of the two chromizing furnaces.  ·         Maintaining appropriate documentation with each work order, such as signing off furnace processing charts.  ·         Occasionally putting parts into the -100 degree F. freezer.  ·         Shot peening of retainers  Requirements ENVIRONMENTAL CHEMICAL CONTACTS:                  In the Heat Treat Department, employees come in short duration contacts with the following chemicals:  ·         Quench oils, lubricating oils, tri-valent chrome (solid chrome), zirconium, ammonium iodide, hexavalent chromium (chromic acid), sulfuric acid, cupric sulfate, endothermic gas, natural gas, anhydrous ammonia.    Furnace elevated temperatures, up to 1750 degree F.    Critical Competencies Demonstrated mechanical aptitude Ability to understand and follow work instructions Basic computer skills in Microsoft Word & Excel ·         This position is subject to the International Traffic in Arms Regulations (ITAR).  As a result, all applicants must be U.S. Persons within the meaning of ITAR.  ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., Green Card Holder), Political Asylee, or Refugee. ·         This position is subject to policies and procedures set forth by the State Department and applicants who do not meet such requirements will not be eligible for the position. Education and Experience Requirements ·         Must have a High School Diploma or equivalent ·         At least 1 year experience in a manufacturing precision machining environment Knowledge of G&M Codes  Experience with manual turning/milling or drilling or CNC mill, lathe, broach and drilling is required Experience with a Key Seater is preferred Proficient knowledge of GD&T and drawing reading skills ·         Experience with machine tools and inspection tools such as gauge blocks, dial indicators calipers and micrometers. ·         Insert tooling nomenclature Ability to understand and follow work instructions ·         Good communication skills and teamwork are essential Physical Demand and Work Environment:           For small parts, under 10 lbs. each (it is more of a repetitive things to place parts in and out of containers/heat treat baskets).  For heavier parts, we have lifting devices, jib hoists, lifting tables, magnets, etc.  We load/unload baskets 1 – 3 hrs. per day.  Occasionally more muscle is required when pushing loads, pulling loads on the roller cart, shifting them around in and out of furnaces.  Unbolting and bolting eight bolts on the chrome furnace, access doors requires pressure.   This is done one to two times daily (the heat/cool cycle is 24 hrs.).  Benefits Benefits: start after 90 days ·         PTO is a set rate. Starts at 1 week. It is actually “unpaid vacation” and they get the lump sum paid out mid-year. (1.5% of gross earnings from the prior contract) ·         14 paid holidays; Christmas shut down but they usually work ·         401K is automatic 2% contribution. Plus a 50% match of up 5% ·         Incremental pay increases every 6 months

Who Are We? UniUni is a Canadian last-mile e-commerce logistics that is one of the fastest growing companies in Canada. As a platform that seamlessly integrates advanced technology with efficient delivery solutions, UniUni enables businesses to provide a superior online shopping experience, ensuring unparalleled efficiency and customer satisfaction. Catering to a diverse range of clients—from emerging e-commerce platforms to established online retailers and brands—UniUni offers exceptional service across North America. Recognized as the fourth fastest-growing company in Canada, UniUni continues to set industry standards, offering a robust, customer-centric approach to e-commerce logistics.   What Do We Offer? At UniUni, we offer exciting opportunities to our employees to achieve their career goals. We believe all roles should develop your skills, broaden your experience, and help you build a rewarding career. If you are ready to join UniUni’s dynamic team, while working hard and having fun doing it, we invite you to apply online and let us know how you can be part of our success story.   Position Overview As a Forklift driver / Operator you will be operating a forklift to pick orders, replenish inventory, and maintain the warehouse organized. Assist any staff and temporary staff with the unloading of containers You will also need to provide assistance with any other warehouse operations as needed. Requirements Key Responsibilities Operate forklifts to load and unload freight from trucks, trailers, and docks. Ensure all freight is handled with care, following safety protocols and company guidelines. Inspect forklifts before use and report any maintenance or safety issues. Organize and store freight in designated warehouse areas. Accurately record and maintain inventory data. Assist with other warehouse duties as needed, including packaging and labeling.   Requirements Valid Forklift Certification. Night Shift (6:00PM-2:30AM) rate：20/h Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k) Paid Time Off (Vacation, Sick & Public Holidays) Training & Development