Browse
···
Log in / Register

Project Engineer (El Paso, TX)

$40,000-45,600/year

2016 N St Vrain St, El Paso, TX 79902, USA

Favourites
Share

Description

JOB SUMMARY: To provide Document Administration for all phases of the construction project(s) including Subcontracts, Change Orders, RFIs, ASIs, Submittals, Meeting Minutes, As-Built Drawings, Closeout Documentation and to provide administrative support to the Project Management Team. PROJECT ENGINEER DUTIES: CULTURE AND POLICY: • Our Employee Handbook: Our PE is an important member of the company. Staff at all levels view Pes with high regard. A PE shall be familiar with employee policy, operate in compliance with the policy, reinforce the policy with team members, and lead by example. • The company Safety Manual: PE is responsible for complying with and promoting safety on the jobsite. • If we’re not having Fun, were done: The company’s culture embraces the notion that we all perform better when we are enjoying our work, overcoming challenges, learning, achieving, and yes, winning. As PE you are to promote this positive fun company culture. Winning needs to be shared. Lessons learned, humbly and invitingly shared as well. This company is full of geeky construction folks, who take themselves very seriously, and have high expectations for themselves and those they work with, all contributing to the level of pride that binds us as a team. Keep the fun. • Marketing: The PE has an impact on whether the company has the opportunity of repeat business and is often conversing with contacts that could present new opportunities. PE is to conduct all communications and presentations in a professional manner. PE shall remain knowledgeable of all company engagements. The PE shall provide urgent response to any company marketing or estimating request pursuing RFI/RFQ/RFP/Interviews, to include keeping your personal resume current and immediate participation in brainstorming, content contribution, and subsequent review of RFP written and graphic (draft) content, once requested. SUBCONTRACT ADMINISTRATION: • Subcontracts: The PE is responsible for drafting the scope of work for each subcontractor for Project Manager approval. The PE is responsible for tracking the execution of Subcontracts and where necessary putting together Addendums for the Subcontracts. • Subcontractor Change Orders: The PE is responsible to assist the Project Manager in gathering pricing, assembling, logging, distribution, and tracking subcontract change orders. OWNER CONTRACT ADMINISTRATION: • Prime Contract: The PE is responsible to review and understand the company’s Contractual obligations to the Owner. • Owner Proposals and Change Orders: PE is to assist the Project Manager with the creation, tracking, and logging of Owner Proposals and Change Orders. • As-Built Drawings: The PE is responsible for updating the plans with changes as they occur throughout the project. This is done through Procore. The PE is to ensure that the As-Built Drawings are up to date on all RFIs, ASIs and Approved Proposal Requests. • Accident Reports and OSHA Reports: The PE is responsible for logging accident reports and OSHA Reports in Procore. • Turnover Documentation: PE is responsible to collect and monitor turnover documentation (Certificates of Substantial Completion and Certificates of Occupancy). CLOSEOUT DOCUMENTATION: • Closeout Checklist: The PE is responsible to create and keep an updated closeout checklist from the beginning of the job through completion. The closeout checklist tracks all closeout items required at the end of the job and when they are received. • The PE is responsible to gather all closeout documentation for the project and ensure that it is delivered to the Architect in the proper format. SCHEDULING AND PROACTIVE PLANNING: • Submittals: PE is responsible to coordinate with the Project Manager and Superintendent to schedule submittals according to order of production and lead times. Submittal Scheduling and Coordination is a crucial aspect to this job. • Scheduling: The PE may be asked to assist in inputting the schedule in Microsoft Projects under the direction of the Project Manager. The PE should be familiar with Microsoft Projects. CONFLICT RESOLUTION/PROBLEM SOLVING: • Conflict Resolution/Problem Solving – The PE is a problem solver focused upon resolving disputes or non- compliance issues that disrupts the production of the project within job description. • The PE is to report all site conflicts to the Superintendent. MEETINGS and COMMUNICATIONS: • Pre-Construction Meetings with Owner and Design Team: PE is responsible to prepare agenda and all supporting documents for the OAC meetings. PE is to attend meetings, take accurate notes, produce and distribute meeting minutes in a timely fashion and save meeting minutes to Procore. Meetings need to be conducted in a Professional manner. • Owner Progress and Pay Application Meetings: PE is to attend meetings, take accurate notes, produce and distribute meeting minutes in a timely fashion and save meeting minutes to Procore. Meetings need to be conducted in a Professional manner. • Project Manager Weekly Meeting – The PE is responsible for the agenda and meeting minutes where they will meet with the Project Team to review Project Buyout, Subcontracts, RFIs, Submittals, and Change Orders on a weekly basis. • Document Management Protocol: The PE is responsible for ensuring that all documents within scope of work are stored in Viewpoint according to the Document Management Protocol. KNOWLEDGE, SKILLS AND ABILITIES: • Provide direction to and resolve problems amongst subcontractors and vendors within PE scope of work. • Communication using the following tools: telephone, fax machine, written logs, email, computer, Smartphone and video camera. • Ability to work with little or no supervision. • Ability to meet deadlines, prioritize assignments and provide recommendations. • Communicate professionally and effectively. • Be able to provide support to senior management and multiple project managers simultaneously. • Strong organizational skills. • Strong ability to multi-task. • Excellent written and verbal skills. • Excellent working knowledge of Microsoft Office Products. • Viewpoint Software experience preferred • Ability to follow processes and procedures. • Maintain and exercise integrity in all business dealings. • Ability to work with a variety of Project Manager(s), Superintendent(s) and other business associates.

Source:  craigslist View original post

Location
2016 N St Vrain St, El Paso, TX 79902, USA
Show map

craigslist

You may also like

Craigslist
Austin Diesel Mechanic $20.00+/hr Based on Experience, Benefits
Southern Mail Service, Inc. Full Time - Diesel Mechanic & Mechanic Trainees ⭐️ APPLY NOW ⭐️ Routine Scheduled Wage: $ 20.00 /hour (and up, based on experience) Paid Vacation Paid Federal Holidays Health Insurance Dental Insurance Life Insurance 401 Responsibilities: Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions Inspecting vehicle systems, including suspensions, steering and exhausts Repairing or replacing vehicle transmissions, brakes, engines and other associated parts Conducting field visits in the case of an emergency or sudden breakdown Test driving repaired vehicles to gauge their performance Completing oil changes, wheel balancing, alignment and brake checks Maintaining records of parts inventory and serviced vehicles Certifications/Qualifications: PM Certification Federal Annual Certification Air Brake Certification Air Condensing 609 Certification ABS Training Electrical Training DPF-DEF Training Computer Software Training: Volvo, Cummins Insite, Detroit Diesel Questions? Contact: Thomas @ (512) 926-8822 This contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a), and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, national origin, protected veteran status or disability.
88RM+W3 Austin, TX, USA
$20/hour
Craigslist
START ASAP- Overhead Garage Door Installer (Round Rock)
Better Business Staffing LLC., dba BBS. Overhead Garage Door Installer (with Welding Experience) Bring your mechanical know-how and customer-first mindset to a team that values craftsmanship and safety. As an Overhead Garage Door Installer, you will install, service and repair residential and commercial doors and openers. Diagnosing issues, aligning tracks and springs, and ensuring smooth, secure operation on every job. Each day offers variety, problem- solving and the satisfaction of seeing your work make a visible difference for customers, Install, service, and repair residential and commercial overhead/rolling steel doors, door operators, and dock equipment. Fabricate and weld brackets, frames, and supports as needed. Ensure safe, code-compliant, high-quality work and excellent customer service on every job. Key Responsibilities: • Installation: Install sectional and rolling steel doors, high-speed doors, fire doors, grilles, dock levelers, seals/shelters, and door operators. Set tracks, torsion/extension springs, cables, drums, hinges, rollers, bearings, and shaft assemblies. Align, balance, and commission doors and operators; program remotes, keypads, photo-eyes, safety edges, and control stations. Layout, measure, cut, and anchor angle iron, strut, and tracks to steel, masonry, or wood; drill and set mechanical or epoxy anchors. • Service and Repair: Diagnose and correct issues with springs, cables, operators, controls, limit settings, and safety devices. Perform preventive maintenance and safety inspections; complete fire door annual drop tests per NFPA 80/105 and document results. Emergency after-hours service on a rotational basis as needed. • Welding and Fabrication: Fabricate/repair brackets, frames, track supports, and header/angle assemblies using MIG (primary), Stick, and/or TIG. Weld and fit light structural components, 10–3/8" thickness typical; cut, grind, and finish to spec. Read/interpret shop drawings and blueprints; verify field measurements and adjust/fabricate accordingly. • Safety and Compliance: Follow OSHA, company safety policies, lockout/tagout, fall protection, and rigging best practices. Ensure installations comply with UL 325, DASMA, IDA guidelines, and manufacturer requirements. Maintain clean, safe, and organized job sites and vehicles. • Documentation and Customer Service: Use mobile apps to capture photos, job notes, parts/labor, and customer signatures. Communicate clearly with customers, contractors, and the office regarding scope, change orders, and timelines. • Tools and Equipment: Operate scissor/boom lifts, forklifts, hoists, drills, impact drivers, torque wrenches, grinders, band saws, torches, and welding machines. Perform basic maintenance on tools and welding equipment. Qualifications: • Experience: 2+ years as an overhead/garage door installer or technician; commercial experience preferred. 1+ year hands-on welding/fabrication (MIG required; Stick/TIG a plus). 2-5 years of commercial overhead garage door experience essential Service-oriented. Punctual and detail oriented. Willing to learn and grow with the company. Must be mechanically and/or electrically inclined. Welding and torch cutting experience. Forklift proficiency necessary. • Technical Skills: Proficient with torsion/extension spring systems, shaft assemblies, and door/operator alignment. Comfortable with electrical low-voltage terminations, limit adjustments, photo-eyes, and safety circuits. Ability to read blueprints, wiring diagrams, and interpret manufacturer manuals. Competent in measuring, leveling, squaring, and layout; concrete/masonry anchoring. Licenses/Certifications (preferred or willing to obtain): Valid driver’s license with clean MVR; DOT medical card as required. OSHA 10/30, aerial lift, and forklift certifications. AWS D1.1 or equivalent welding certification preferred. IDA/DASMA/Manufacturer certifications a plus. NFPA 80 drop-test training a plus. Soft Skills: Strong troubleshooting and problem-solving; detail-oriented and safety- focused. Professional communication and customer service; team player. Able to work independently with minimal supervision. Service, repair, and install loading dock levelers, sectional overhead doors, rolling steel doors, commercial high-speed doors, etc. Confirm daily work orders with dispatch. Retrieve products from suppliers. Safely transport and deliver products to job sites. Inspect the job site to confirm any potential issues. Install products efficiently and professionally. Deliver great customer service. Executes safety forms and procedures on all job sites. Work on ladders at all heights (8' - 24') as well as scissor lifts and aerial platforms up to 40’. Remove and haul off old doors and openers. Physical Requirements and Work Conditions: Lift and carry 75+ lbs., frequent bending, kneeling, and overhead work. Comfortable working at heights on ladders, scaffolds, and lifts. Work indoors/outdoors in varying weather, exposure to noise, dust, and metal fabrication environments. Use of PPE including gloves, eye/ear protection, respirators as required. Schedule and Travel: Full-time; typical Monday–Friday with occasional overtime and on-call rotation. Monday through Friday, 7 am to 3:30 pm. Competitive hourly wage is $28.00 to $34.00 per hour plus overtime. Must be a U. S. Citizen. Must pass a background check, absolutely no felonies and pass a drug screen test.
H974+6Q Round Rock, TX, USA
$30/hour
Cookie
Cookie Settings
Our Apps
Download
Download on the
APP Store
Download
Get it on
Google Play
© 2025 Servanan International Pte. Ltd.