Nights and Weekend Local Driver CDL A

Join JC Grounds Management, a leading snow removal contractor, as a Salt Truck Operator (STO) for the upcoming winter season.  As a salt truck operator at JC Grounds Management, you will receive training on equipment safety, operation, path of motion, and product application.  Our fleet of application vehicles do not require a CDL license to operate however you must be comfortable operating a large truck during adverse weather conditions.  Most of the shifts occur between 6pm and 8am but can/will extend to anytime of the day especially following a winter event.  Salt truck operators need to be on-time and have a clean driving record.  They will also need to load their truck with material using a skid steer (training to be provided if necessary).  We are currently looking for operators to service routes dispatched from Chelmsford, Lowell, Billerica, Tewksbury, Wilmington areas. Responsibilities Safely and efficiently operate the vehicle and apply the correct amount of product according to the specified site maps. Arrive on-time and ready to work. Work extended hours as necessary based on the severity of snow events. Qualifications Clean Driving record Valid drivers license Ability to work in a dynamic environment and adapt to varying work hours. Experience operating a skid steer is a plus Compensation Compensation details will be provided upon successful application. Rest assured, we offer competitive rates and convenient weekly direct deposit payments. Benefits Convenience: Receive your hard-earned money directly into your bank account on a weekly basis. Longevity: Seasonal operators return year over year and receive annual increases based on performance and length of service. Apply now in 2 minutes! Powered by

Procon is a top-ranked construction management and technology consulting firm with 25 years of experience delivering high‑impact projects across the U.S. and worldwide. An ENR Top 100 CM/PM firm for five consecutive years, we specialize in program management, project controls, commissioning, and virtual intelligence—and offer an excellent platform to grow your career while shaping the future of the built environment. Procon now seeks a Mechanical QA Representative for a long term opportunity in the Pullman, WA area.  The ideal candidate will have 8 years or more of experience conducting mechanical inspections on new construction and renovations of buildings. The ideal candidate will review blueprints, monitor construction progress, examine interior/exterior work, utilizing survey instruments to verify completed work, taking photographs and maintaining a log. This role requires various skills and experience as listed below. Requirements Qualifications & Skills Must have 8 years of experience as a mechanical inspector with at least one project over $50M in dollar amount. Bachelors in mechanical engineering degree or related field is required for less than 10 years of experience. Must have experience with government construction. Government or military project experience is preferred. Must have excellent communication and problem-solving skills. A high school diploma or equivalent is required for all candidates. OSHA 30 Hour Certification is preferred. Experience with Prolog Construction Management software is preferred. Ability to obtain CQM certification within the first 1st month of employment. Ability to work on site is required. Responsibilities & Duties Coordinate and facilitate all construction activities related to the General Contractor (GC) and Client. Provide assistance for any and all contract issues related to mechanical systems on all phases of the design-build contract. Provide daily onsite field representation to monitor construction contractor performance and inspect work in accordance with specifications and drawings. Provide technical expertise of the products/materials being installed in the project. Monitor all construction activities scheduled with emphasis on milestones, phasing/ sequencing, submittals, efficient and balanced work flow, major test and any unique requirements needing special schedule or tracing. Monitor project for cleanliness. Monitor and inspect the GC for compliance with current safety regulations, standards, project safety plan and report any non-compliance to the Client. Immediately notify the Client when any life threatening conditions are observed, and provide assistance as necessary to remedy such situations. Provide electronic daily reports of the contractor’s and sub-contractors’ work activities witnessed during site monitoring. Provide summary of and discrepancies from the requirements of the Contract Documents. Provide daily site photos to be saved electronically at a designated location on the Client’s network. Provide support to the Senior Project Manager in all design reviews prior and during construction. Provide pre-construction, during construction and post-construction photos of the site. Provide project coordination and construction quality assurance services for the technical aspect of the project. The inspector shall physically verify correct materials delivered and/or in secured storage on or off site, proper materials installed, and percentage of work satisfactorily completed and in place and provide this information to the CM. Benefits Salary commensurate with experience. Interested and qualified candidates please submit a cover letter and a resume. Procon offers competitive salaries and a comprehensive benefits package, including full medical/dental insurance and 401(K) plan. Procon is an equal opportunity employer and considers qualified applicants for employment without regard to race, gender, age, color, religion, disability, veteran status, sexual orientation, or any other protected factor.

Truck Driver, Turf Equipment Operator, Grounds Crew - $35/hour to $45/hour DOE – Golf and Sports Turf maintenance company seeks candidates with experience preferred. Candidates must have a positive working attitude, be a team player, able to follow instruction, work in all weather conditions and lift/move 50 pounds. Candidate must have a valid CDL-A license, good driving record, MA hoisting license and DOT medical card. Competitive wages paid and frequent overtime required. Send resume or call and leave message at 508-842-6800

Procon is a top-ranked construction management and technology consulting firm with 25 years of experience delivering high‑impact projects across the U.S. and worldwide. An ENR Top 100 CM/PM firm for five consecutive years, we specialize in program management, project controls, commissioning, and virtual intelligence—and offer an excellent platform to grow your career while shaping the future of the built environment. Procon now seeks a Electrical QA Representative for a long term opportunity in the Pullman, WA area.  The ideal candidate will have 8 years or more of experience conducting mechanical inspections on new construction and renovations of buildings. The ideal candidate will review blueprints, monitor construction progress, examine interior/exterior work, utilizing survey instruments to verify completed work, taking photographs and maintaining a log. This role requires various skills and experience as listed below. Requirements Qualifications & Skills Must have 8 years of experience as an electrical inspector with at least one project over $50M in dollar amount. Bachelors in electrical engineering degree or related field is required for less than 10 years of experience. Must have experience with government construction. Government or military project experience is preferred. Must have excellent communication and problem-solving skills. A high school diploma or equivalent is required for all candidates. OSHA 30 Hour Certification is preferred. Experience with Prolog Construction Management software is preferred. Ability to obtain CQM certification within the first 1st month of employment. Ability to work on site is required. Responsibilities & Duties Coordinate and facilitate all construction activities related to the General Contractor (GC) and Client. Provide assistance for any and all contract issues related to mechanical systems on all phases of the design-build contract. Provide daily onsite field representation to monitor construction contractor performance and inspect work in accordance with specifications and drawings. Provide technical expertise of the products/materials being installed in the project. Monitor all construction activities scheduled with emphasis on milestones, phasing/ sequencing, submittals, efficient and balanced work flow, major test and any unique requirements needing special schedule or tracing. Monitor project for cleanliness. Monitor and inspect the GC for compliance with current safety regulations, standards, project safety plan and report any non-compliance to the Client. Immediately notify the Client when any life threatening conditions are observed, and provide assistance as necessary to remedy such situations. Provide electronic daily reports of the contractor’s and sub-contractors’ work activities witnessed during site monitoring. Provide summary of and discrepancies from the requirements of the Contract Documents. Provide daily site photos to be saved electronically at a designated location on the Client’s network. Provide support to the Senior Project Manager in all design reviews prior and during construction. Provide pre-construction, during construction and post-construction photos of the site. Provide project coordination and construction quality assurance services for the technical aspect of the project. The inspector shall physically verify correct materials delivered and/or in secured storage on or off site, proper materials installed, and percentage of work satisfactorily completed and in place and provide this information to the CM. Benefits Salary commensurate with experience. Interested and qualified candidates please submit a cover letter and a resume. Procon offers competitive salaries and a comprehensive benefits package, including full medical/dental insurance and 401(K) plan. Procon is an equal opportunity employer and considers qualified applicants for employment without regard to race, gender, age, color, religion, disability, veteran status, sexual orientation, or any other protected factor.

Become a Lugger with your Box Truck — Flexible Moving & Delivery Work (Box Truck - Driver) Make $200-$400 a day with your box truck & moving things. Get paid moving your neighbor's large items, on your own schedule. Become a driver for Lugg today! Pick your own shifts and get paid daily. What is Lugg? We're an on-demand moving platform that connects people that need a truck to people that have a truck. It’s like Uber, but for trucks on-demand. You pick the hours you are willing to work, and we will send you helpers and move requests during that shift. Get paid daily based on your truck size, tips, and completed moves. Why drive or help with Lugg? • Flexible hours: Pick the shifts that fit your day. • Fast payouts: Same-day pay available. • Teamwork: Most jobs are a two-person crew — a Driver and a Helper. • Real impact: Furniture deliveries, marketplace pickups, storage runs, house & apartment moves, donation drop-offs & more. How to become a driver or worker? • Click “Get Started” and submit the form with your basic information. • Complete our Lugger application by filling out information about your truck, driver’s license, insurance, and materials. • Complete a 30 minute phone training. • Download the Lugger App / Connect to your bank account. • Select your shift and do your first trip with a helper. Requirements • Age: 18+ years old • Strength: Able to lift 100+ lbs safely • Phone: iPhone or Android • Professionalism: Great communication & customer skills • Screening: All crew members complete background checks • Truck: Pickup truck, box truck, or cargo van (year 2001 or newer) and proof of ownership or insured driver of the vehicle Potential Earnings • Mover only (no truck) = $18/hr avg • Pick Up truck = $28/hr avg • Spinter Van = $35/hr avg • Box truck = $42/hr avg Ready to start? *Earnings vary by market, effort, vehicle type, and demand. This is independent-contractor work.

Procon is a top-ranked construction management and technology consulting firm with 25 years of experience delivering high‑impact projects across the U.S. and worldwide. An ENR Top 100 CM/PM firm for five consecutive years, we specialize in program management, project controls, commissioning, and virtual intelligence—and offer an excellent platform to grow your career while shaping the future of the built environment. Procon seeks an Electrical Safety Manager for a long term opportunity in Houston, Texas. The Electrical Safety Manager is responsible for developing, implementing and overseeing all aspects of electrical safety programs for medium and high voltage systems on site. This position ensures compliance with OSHA, NFPA 70E (Standard for Electrical Safety in the Workplace), NEC, and JSC safety standards while fostering a culture of continuous improvement and accountability. The Electrical Safety Manager will work closely with maintenance, contractors and management teams to mitigate electrical hazards, perform audits, support safe work practices, share industry safety knowledge and improve safety culture and behavior on site. This role requires various skills and experience as listed below. Requirements Qualifications and Skills Electrical/Mechanical education or Bachelor's degree in Electrical Engineering, Occupational Safety, or other relevant education/experience in the field of electrical engineering. 7+ years of experience in electrical safety roles, preferably within a power generation or heavy industrial environment. In -depth knowledge of NFPA 70E, NEC, OSHA 1910/1926 standards, and relevant electrical safety codes. Professional certification in safety management (CSP, CHST, EM385) preferred. Experience with medium and high voltage (480V-15kV and 138kV) utility systems and generation environments. Responsibilities and Duties Lead the development, implementation and maintenance of JSC's site Electrical Safety Program in compliance with NFPA 70E, OSHA, NEC and JSC policies. Act as SME (Subject Matter Expert) for electrical safety, providing technical guidance to operations, maintenance, contractors and engineering teams. Conduct job safety analyses (JSAs) participate in field walks, track safety statistics, provide daily reporting and have a constant presence while work occurs in new and existing electrical equipment. Oversee electrical LOTO (Lockout/Tagout) program compliance, training and verification. Manage and coordinate periodic safety audits, inspections and corrective actions relating to electrical safety. Ensure that electrical PPE (Personal Protective Equipment) is available, maintained, appropriately rated and used. Collaborate with JSC HSE in developing additional electrical safety training courses for qualified and new personnel. Maintain safety training records and provide refreshers when needed. Lead incident investigations involving medium and high voltage electrical equipment. Provide root cause analysis and corrective action plans to JSC management. Maintain accurate records and metrics on electrical safety performance and incidents. Review Utility Procedures with an understanding of the work in medium and high voltage systems. Provide feedback as required to strengthen safeguards. Perform routing field walks and safety go-arounds to maintain a visible and consistent presence across operational areas, reinforcing electrical safety expectations and identifying at-risk conditions. Benefits Salary commensurate with experience. Interested and qualified candidates please submit a cover letter and a resume. Procon offers competitive salaries and a comprehensive benefits package, including full medical/dental insurance and 401(K) plan. Procon is an equal opportunity employer and considers qualified applicants for employment without regard to race, gender, age, color, religion, disability, veteran status, sexual orientation, or any other protected factor.