Warehouse Help Needed (Bend)

Jacuzzi Group, a leader in the manufacturing of hot tubs, swim spas, baths, showers, saunas, and pool equipment, is seeking a skilled Mold Technician to join our team in Chino, CA. As a Mold Technician, you will play a crucial role in the production of high-quality products by ensuring that molds are properly maintained, created, and operating efficiently. Key Responsibilities: Intermediate-level toolmaker responsible for creating new molds, as well as modifying and repairing current molds. Conduct regular inspections and maintenance of molds to ensure optimal performance. Execute intermediate resin procedures, including sanding and drilling molds, as well as fabricating trim tools, templates, and jigs.  Ensure molds are cleaned and stored properly after use to prevent damage Operate machinery to test molds before sending to production. Work closely with Engineering and Quality staff to improve overall efficiency of tools. Follow all safety protocols and maintain a clean and organized work area. Schedule: Monday-Friday, 2nd shift 12:30-9:00 pm Compensation is $24+/hr. depending on experience Requirements Minimum of 2 years of experience working with molds in a manufacturing environment. Familiar with tooling equipment, materials, and processes used in a mold shop. Willingness to wear respirator and other required personal protective equipment (PPE) as necessary. Proficient in use of measuring devices such as rulers, calculators and perform shop math Strong mechanical aptitude Excellent attention to detail and commitment to quality. Ability to work effectively both independently and as part of a team. Good communication and interpersonal skills. Physical ability to lift and move heavy molds (up to 75lbs) as required. Must have prior manufacturing experience; preferred experience operating vacuum forming machinery, fiberglass process, autobody or FRP (Fiber reinforced plastic) Forklift certification a plus Benefits 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Vision insurance

Position Responsibilities • Safety and Compliance: Adhere to safety protocols and guidelines to maintain a safe working environment. Comply with all federal, state and company policies, procedures, and regulations related to occupational safety. Be a leader and expert on safety requirements and ensure the team is following rules and regulations. • Quality Control: Monitor and maintain quality standards by conducting regular checks and inspections during the production process. Take corrective actions when necessary to ensure products meet specifications and comply with regulatory requirements. • Equipment Operation: Operate assigned machinery and equipment according to the established procedures and guidelines. This may include but it is not limited to production machines, manufacturing tools, assembly lines, or computer-controlled systems. • Maintenance and Troubleshooting: Perform routine maintenance tasks, such as cleaning, lubricating, and inspecting equipment, to ensure proper functionality and prevent breakdowns. Identify and resolve equipment malfunctions or issues promptly and efficiently. • Production Efficiency: Optimize equipment by adjusting settings, monitoring production rates, and identifying opportunities for process improvements. Minimize downtime by anticipating maintenance needs and coordinating with maintenance staff as required. • Training Expertise: Demonstrated ability to develop and deliver effective training for Production Operator 1 and 2 team members, and as well as other positions as needed. • Leadership: Leadership qualities to inspire and motivate production operators to achieve high performance. • Documentation and Reporting: Maintain accurate records of production activities, equipment performance, and any incidents or deviations. Complete production reports, logs, and other required documentation as per standard operating procedures. • Collaboration and Communication: Collaborate with team members, supervisors, and other departments to ensure smooth workflow and effective communication. Share knowledge, insights, and best practices to support continuous improvement initiatives. • Cleanliness and Organization: Maintain a clean and organized work area, ensuring that materials and equipment are properly stored, and waste is disposed appropriately. Ensure the team is working in a clean and neat manner as well. • Material Handling: Receive, inspect, and verify incoming materials and supplies. Safely transport materials to designated area using appropriate equipment, such as forklifts, pallet jacks, or hand trucks. Organize and store materials in designated locations for easy retrieval and inventory control. • Ability to operate material handling equipment, such as forklifts, pallet jacks, or hand trucks, with appropriate certifications if required. • Perform other duties as assigned and work in other areas as see needed. Position Requirements • Strong technical and mechanical aptitude, with the ability to operate and troubleshoot various types of equipment. • Knowledge of safety protocols and procedures related to equipment operation and maintenance. • Knowledge of cleaning techniques, sanitation practices, and the use of cleaning chemicals and equipment. • Excellent attention to detail and ability to follow instructions and procedures accurately. • Good problem-solving to detail and the ability to make decisions quickly in a fast-paced environment. • Effective communication skills to collaborate with team members and convey information clearly. • Physical stamina and ability to perform repetitive tasks, lift heavy objects, and work in a physically demanding environment. • Compliance with health and hygiene standards, including wearing appropriate personal protective equipment (PPE) when required. Hours are 3:00 pm to 1:30 am Monday to Friday some Saturdays. Clean Background and drug test required Please sent your resume. 7602 W. Indian School Rd Suite# C5 Phoenix, Az 85033

Maintenance Technician – Day Shift - Starting at $35 per hour based on experience. Sheboygan Falls, WI How can you make a difference at your job and can have the opportunity to grow? Join the Sheboygan Falls Team! In Sheboygan Falls we heavily support medical, food, and graphic arts customers with thin gauge plastic sheeting for thermoforming and printing applications. You’ve most likely seen a product that was made from materials from our plant—iTunes cards, Home Depot signs, even the covers of comic books. We are currently looking for associates to join our team to support our variety of customers. If you meet the qualifications and want to make a difference in a fast-paced environment with a company that has a large focus on safety and success, Spartech might be the ideal company for you. Job Summary The Sr. Maintenance Technician (Electrical) is vital part of a team. Performs a variety of activities with the ability to identify and implement efficient paths of action to finish the assigned work. Must be able to perform assigned work to acceptable quality and proficiency levels with ability to exercise independent judgment and to establish and maintain solid working relationships with others. Should be able to test, calibrate, diagnose, and repair various devices. Good communication and organization skills. Should be able to perform the listed duties, but not limited to, with minimal supervision and/or assistance from supervisor or Electrical Engineering within the Maintenance Group. Essential Duties & Responsibilities Facilities maintenance requires the performance of tasks incidental to preserving or improving the physical structure. Repairing and replacing defective parts in motors, controllers, switchboards, switches, conductors and other electrical fixtures. Installing, maintaining, and repairing electromechanical, electrical, and electronic components of machinery and equipment, including transformers and Hydraulic and pneumatic devices. Performing preventive repair and maintenance of plant and shop electronic and electrical systems, devices, equipment and components. Testing solid-state circuitry to find defective parts in digital and analog equipment and replacing defective parts. Apply electrical theory or related knowledge in testing and modifying operational or developmental electrical control circuitry of equipment within the facility. Utilizing specialized digital cameras and thermo-graphic imaging to perform infrared analysis and examination of facilities equipment. Designing and modifying motor power control equipment circuits, reading and interpreting blueprints, wiring diagrams and schematics. Planning and laying work orders or work from instructions, using sketches, blueprints, and drawings. Making sure the accurate and appropriate completion of all preventive electrical Technician duties. Modify electrical prototypes in order to correct operational deviations under the general direction of an Electrical Engineer. Willing and able to operate Powered Industrial Truck Equipment (scissor lifts, etc.). Implement the company’s safety procedures. Other duties as assigned. TOOLS: Provide own hand tools and measuring devices common to these job requirements. Requirements Required Education and Skills: Requires knowledge gained from related training and practical experience as an Industrial Electrical Technician. Must be able to perform assigned work to acceptable quality and proficiency levels. Ability to use shop math, basic precision measuring devices, knowledge of the trade, ability to read and interpret electrical prints and drawings. Ability to identify and recommend efficient paths of action to finish the assigned work. Ability to exercise supervised judgment. Ability to establish and maintain solid working relationships with others. Should be able to test, calibrate, diagnose, and repair various devices. Good communication and organization skills. Three years’ experience in Industrial Electrical Technician field or Certification in Electrical Technician field from an accredited institution. Benefits We offer competitive salary, incentive, and benefit programs. Most Benefits Start Day ONE! Benefits include: Medical, Dental, & Vision. Company paid life and long-term and short-term disability programs. Flexible spending accounts. 401(k) with a strong matching program. 120 hours Paid Time Off (pro-rated based on hire date). 11 paid holidays Spartech LLC, headquartered in Maryland Heights, Missouri is a leading manufacturing organization in the Custom Sheet & Roll Stock and Packaging industries with numerous locations throughout the United States. We have a broad customer base with extensive product offerings. Many of our materials are used in products you might see every day— for example if you start your morning with a yogurt or your child eats a single serving peanut butter—you may have already seen some of our materials. More unique uses of our materials can be seen in Military or security applications, for example, with bullet proof materials. From routine daily-life to life-saving applications—we make a difference. Our broad scope of products and services keep our environment interesting and challenging with a culture focused on success. Spartech, LLC provides equal employment opportunity to all qualified applicants regardless of race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, or veteran status, or other legally protected classification in the state in which a person is seeking employment. Spartech will use E-Verify to ensure employment eligibility of newly hired employees where required.

JACO Machine Works is an AS9100 certified machine shop supporting the medical, aerospace and semiconductor industries. We are in immediate need of a CNC lathe machinist for our growing operation. This position is for first shift with overtime available who can: • Perform setups and operation of 7-axis CNC lathes, screw machines, and Multi-axis turret machines. • Retrieve machine programs from database, create/read tool lists for job. • Accurately set tools and work offsets. Change tooling as needed to restore operation. • Ensure produced parts meet drawing specifications with standard inspection instruments. • Able to troubleshoot and perform basic edits of G-code to solve problems. • Read CMM reports and adjust machine offsets as needed. • Follow work instructions and communicate with Supervisor. • Train machine operators on any job that you set up. • Deburring of parts when needed. • Perform basic machine maintenance. • Keep work area clean and organized. Required Job Skills: • Must be organized and accurate with documentation. • Familiarity with Fanuc and Mitsubishi or similar controls. • Must have good knowledge of machine processes of manufacturing and problem-solving skills to ensure strict quality/dimensional and cosmetic standards. • Able to work with tight tolerances like +/-.0002” • Must have a strong work ethic and work well with others. • Must have good knowledge of G and M codes. • Must be knowledgeable of GD&T. Desired Education/Experience: • High school diploma or equivalent qualification required. • Certificate or diploma in engineering is an advantage • 5-10 years' experience as a CNC machine operator or setup • Experience with Ganesh or Tornos turning equipment. • CAD/CAM experience a plus • Experience with JobBoss shop software a plus. • Background in AS9100 work environment. Mathematical Skills: • Ability to add, subtract, multiply, and divide measurement units, common fractions, and decimals. Working in and converting metric/imperial units. Computer Skills: • To perform this job successfully, an individual should have knowledge of basic computer use. Working with Word/Notepads, Excel, and logging in to databases, etc. Physical Requirements: • Ability to lift/or move up to 50 pounds occasionally. Benefits: • PTO and company paid holidays • 401(k) with employer match • Health insurance • Dental insurance • Vision insurance • Referral program All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees.

1st Shift MIG and TIG Fitter Welder (Non-Production)   2+ years of MIG welding experience, two years of fitter welder experience, 2+ years of non-production welding experience and the ability to read and understand engineering drawings is required Pay is up to $62,000 Must be a United States citizen or Green Card holder No remote Full-time, permanent W-2 position Full benefits No relocation Located in the Brown Deer, Wisconsin area   This full-time, permanent MIG and TIG Fitter Welder career opportunity is at a financially stable, employee-owned company that created their dynamic industry. The company gifts employees company stock. An annual discretionary bonus and a 401k Plan are provided. The company values the culture and has recently implemented their core values. They have also recently implemented their Entrepreneurial Operating System for short-term and long-term growth plans. They are proactive in the products they provide customers both now and for the future. The company has recently added a building and remodeled the existing facilities. Growth is unlimited here. The company is making flexibility a priority with potential flexible work hours and work from home possibilities. The environment is fast-paced and challenging. The work is interesting, challenging and not tedious as every machine manufactured is custom. Projects are unique and interesting.   The duties and responsibilities of the successful candidate will include the following: Reading drawings Setting up materials up to 1" thick to be welded Non-production MIG welding for a variety of unique products Grinding as needed Requirements 2+ years of MIG welding experience 2+ years of fitter welder experience 2+ years of non-production welding experience The ability to read and understand engineering drawings Exceptional communication skills A solid work history A US citizen or possess a green card A residence within 45-minutes

This position is for a CNC Milling Programmer for Vertical CNC Mills and 4 Axis Horizontal CNC Mills. CNC Programmer Job Description and Requirements: The CNC Milling Programmer responsibilities include: Developing and maintaining CNC Programs for component parts. Write, develop, and edit CNC programs. Create setup instructions for CNC operators. Study customer drawings, work orders, and specifications to ensure accurate setup sequences. Keep detailed records for equipment and procedures. Collaborate with project coordinators and the design team on project drawings. Manage and organize the CAD drawing library for ongoing projects. Other duties as assigned. The successful candidate will have the following skills: Three-five years of CNC programming experience, the ability to read customer drawings, process and technical procedures and adhere to company and governmental regulations. Good communication skills, both written and verbal Highly motivated, self-starter Experience with Solidcam and Surfcam Programming is a plus Experience with Mazak and Haas machines is a plus Advanced Machining Techniques, offers an excellent benefit package including: • Company paid health insurance • Dental and vision reimbursement • Top Pay • Holiday and vacation pay • 401k Please Only qualified experienced candidates need apply and send resume -- enter "Machinist" on subject line, include specific applicable experience, references, and salary requirements FAX RESUME TO 408-778-4600 OR Reply to this email with your attached resume.