Coffee Technicians Repairs ( part time ) (Las Vegas)

Helical Drilling, a New England based design build Geotechnical Engineering firm is looking to fill a Quality Control Technician’s role. This role would ensure that the project’s specifications are followed and that Helical Drilling’s work has been installed according to the design. They will work with the Helical Drilling (HDI) field supervisor, HDI office, the general contractor, and the project geotechnical engineer. The individual is responsible for recording accurate field and production information on a daily basis along with recognizing unknown anomalies that can affect the original design parameters. When changes or anomalies do occur, they also need to collaborate with the above mention entities on solutions and/or repairs. A successful QC Tech will ensure a project has been built correctly. Responsibilities and Duties: • Read, understand, and follow the design submittal and specifications as it relates to construction of the project. • Document and transfer to field layout plans as-builts, test pier locations, offsets, newly discovered utilities, etc. • Read and understand the boring logs. • Inform field supervisor of on-site change of conditions. • Review design submittal to verify information is accurate. • Complete accurate and timely Daily Field Reports (DFRs). • Prepare plans for field production and use. • Document and report all anomalies. • Participate in project kick off and closeout calls. • Communicate with the HDI office, GC, and/or Geotechnical engineers as directed by field supervisor. • Keep track of production and assist in sequencing of installing elements. • Introduce and be engaged with the on-site geotechnical consultants. • Calculate volume of materials needed (concrete, cement, grout, sand mix, infield mix, etc.) • Setup and preform load tests. Understand the required criteria for execution and completion of a successful test. • Record and complete all logs (drilling, driving, sheeting, grouting, test piers, installation, etc.) • Review the Quality Control Summary sheet and As- Built information at the end of a project for accuracy before submitting to the office. • Enter and record accurate information into the logs. REQUIREMENTS: • MUST HAVE: Reliable Vehicle and Valid Drivers License (We work all over New England) • 1-5 years of experience as a QC or laborer with QC experience in a fast paced construction company-Preferred • OSHA 10 Preferred • Ability to lift 50-100 lbs. • Must be able to work assigned hours with crew with some overnights • High School Diploma or GED equivalent required *Must be able to speak, read and write English and be a US Citizen ESSENTIAL KNOWLEDGE AND SKILLS * Attention to detail * Responsible attitude * Understanding of basic geometric formulas * Ability to read, interpret, and scale plans * Ability to use a tape measure for field layout * Ability to use elevation control devices * Well organized * Confident * Takes care to complete tasks fully and well * Labor as needed * Versatile BENIFITS * 100% Company Paid Health and Dental Care (Single or Family) * 3 Weeks PTO (Paid Time Off) * 9 Paid Holidays * OT After 8 Hours * Rarely Work Weekends * Paid Travel Time and Mileage * Per Diem for Overnight Travel * Paid Hotel Stays (Single Rooms) * 401 K Contribution * Continued Training and Certifications * ESOP, Employee Stock Ownership Plan Equal Opportunity Employer

Altry is a new platform launching in Los Angeles that connects customers with talented seamstresses, tailors, and repair specialists for on-demand clothing alterations and sustainable fashion services. We are looking for skilled Alterations Specialists to join our growing network. This is an excellent opportunity for students and professionals in fashion design, sewing, or garment production who want flexible work and the chance to build their portfolio. What you'll do: - Provide alterations and repairs (hems, zippers, tailoring, etc.) for customers in Los Angeles. - Work independently using your own sewing machine and tools. - Coordinate appointments through our platform. - Deliver high-quality craftsmanship with attention to detail. Requirements: - Experience with garment sewing, tailoring, or fashion production. - Access to your own sewing equipment and supplies. - Reliable, professional, and customer-focused. - Located in or able to travel within Los Angeles. What we offer: - Flexible contract/freelance work. - Set your own base pricing for services. - Altry connects you directly with customers and handles payments. - A chance to grow your experience in the fashion and sustainability industry. About Altry: Altry is a Los Angeles-based startup bringing craftsmanship back into fashion by making alterations and repairs more accessible. Our mission is to support talented artisans while reducing waste in fashion. Apply today to join our network of Alterations Specialists and start building your freelance business.

Bevel is a small residential remodeling company specializing in higher-end remodels, finish carpentry, and custom cabinets in Seattle. We are looking for a skilled carpenter who shares our passion for excellence and who is dedicated to delivering superior results. Additionally, we recognize and reward extraordinary achievements, emphasize safe and healthy work practices, and strive to create a collaborative, supportive environment where carpenters can take pride in their craft and excel. The ideal candidate will have general turn-key remodeling skills and experience with setting up site protection, selective demo, light framing, interior finish carpentry, cabinet installation, occasional window/door installation, siding repairs, and helping maintain clean and safe job sites. The successful applicant will be primarily responsible for helping complete various renovation projects to a high standard and accuracy while working alongside our various subcontractors and helping coordinate and troubleshoot job site challenges as they arise. Excellent customer service skills and a positive attitude is a must. We offer: -Competitive pay -75% medical employee coverage -75% dental employee coverage -PTO -8 paid holidays -Growth opportunities -Bi-weekly pay with direct deposit -Mileage reimbursement for travel between job sites and material runs when driving your personal vehicle -High-quality power tools supplied -Full-time, year-round work that is 70-80% indoors -Access to the woodworking shop for personal projects -Healthy work/life balance -A relatively small service area based around the core Seattle neighborhoods with the occasional Bellevue/Kirkland project, minimizing travel between job sites. Successful applicants should have: -5+ years of residential remodeling experience -Full set of hand tools -Valid driver's license and reliable vehicle -Punctuality and good communication -Professionalism and a professional appearance -Ability to work successfully with a team or comfortable working alone -Must be able to pass a background check Please respond via email with an updated resume. View some of our work at - https://www.instagram.com/bevel_builds/ Thank you and we look forward to hearing from you!

Upscale remodeling contractor in the eastern suburbs of Cleveland looking for generally skilled trades men proficient in carpentry, drywall, light mechanical work, etc. Pay range $20-$35/hr. based on skill level. Benefits would include; Year-round work, vacation pay, company truck (Clean drivers license) back ground check required. Please contact 216-662-5588

Spot-On Home Improvements is seeking an experienced contractor to help out with several aspects of home improvements such as painting, drywall repair, minor plumbing and minor electric, flooring and tile work, appliance installations, and other home renovation needs. Some jobs are located in the Akron areas, and some jobs are located in the Cleveland areas. Our company is scheduled out to about June/July of this year. We are looking for a few qualified and experienced people who want to work, want to show up on time, want to remodel kitchens and bathrooms, and want to get paid weekly for their contributions. The ideal candidate will: have experience and/or knowledge in the above home improvements have a positive outlook be polite and considerate be driven and ambitious have experience with tools / and have his/her own tools be comfortable with heights of about 10 feet (at times) be a self-starter and critical thinker have his/her own transportation.

Salary: $75,000 to $78,000 Schedule: 7am to 3pm Are you a skilled Machinist looking to move closer to the energy and opportunities of New York City? This is your chance to join a well-established, long-standing company with a rich history and plenty of room for growth. What You’ll Do: Operate various machines to manufacture and repair mechanical assemblies Perform milling operations such as drilling, tapping, boring, and conventional milling and lathe work Maintain and use measuring devices for accurate sizing Review and repair defective machine parts using proper tools Apply various metalizing techniques as needed Follow established repair procedures and plans What We’re Looking For: 5+ years of hands-on experience in machining, milling, and lathe operations Strong mechanical aptitude and attention to detail Experience with metal spraying techniques a plus Ability to follow repair procedures accurately Prior experience using Micrometers, Bench Grinders, Excellent Benefits Package! Relocation assistance provided for qualified candidates moving closer to New York City If you’re ready to take your skills to the next level and be part of a team committed to quality and growth, we want to hear from you! Send resumes to Recruiting@admiralstaffinginc.com