Product Manager – Data & AI (full remote) (Seattle)

Our company is looking for a part time data analyst to research and enter equities data for 2-3 hours each day M-F. Work could be done after 5 pm. You will be paid on 1099 and you should be a US citizen. Decent excel skills required. Work starts immediately.

Position Title:  Space Sensitive Activities Technician, Journeyman Company: ACT1 Federal Location: Colorado Springs, CO About ACT1: Delivering mission-critical solutions and industry-leading talent to advance the missions of the partners, organizations, and communities we serve. ACT1 Federal is seeking a Journeyman Space Sensitive Activities Technician. This program provides support to the United States Space Force (USSF), Space Operations Command S33X, Sensitive Activities Division office/staff. Generally, you will provide the client with identity and signature management (ISM) augmentation to the government staff in the execution of the command sensitive activities support program. The client anticipates a high level of knowledge on the full breadth of ISM supporting worldwide operations. Responsibilities: Providing direct support to Command sensitive activity stakeholders throughout the operational lifecycle, to include mission analysis, planning, development, staffing, implementation, and termination. Identifying mission critical vulnerabilities, assess risk to mission, and provide mitigation strategies to decision makers. Understanding and applying DoD policy requirements for sensitive activities and apply to operations, training and force development. Applying identity management protocols to assess risk to personnel and missions and provide mitigation strategies to decision makers. Maintaining currency on key technologies and capabilities, to include ubiquitous technical surveillance, that impact Space Force missions. Developing and maintaining familiarity working within the Joint Community (processes, structure, C2, etc.). Conducting risk analysis to inform Combatant Command leadership decisions. Conducting open-source research, as directed by the client, in preparation for mission analysis and threat assessments. Reporting significant events/incidents. **Physical Demands: Travel may be required** Requirements Active TS/SCI clearance with ability to be SAP cleared. BA/BS degree or additional experience. FOSS or equivalent (Advanced Technician Course or Advanced Planners Course, and Due Diligence Course) Minimum of three (3) years of DoD sensitive activities experience. Minimum of five (5) years overall DoD experience. Preferred: FOSS and PAC or equivalent (Advanced Technician Course, Advanced Planners Course, and Due Diligence Course). MA/MS Degree. Ten (10) years overall DoD experience. Benefits Medical/Dental/Vision Insurance  ACT1 Employee Stock Ownership Plan (ESOP)  Company Paid Life and AD&D Insurance  Company Paid Short-Term Disability   Voluntary Long-Term Disability  Flexible Spending Accounts (FSA)  Health Savings Account (HSA)  401K with employer match  Paid Time Off   Paid Holidays  Parental Leave  Military Leave  Education, Training & Professional Development  Voluntary Accidental Injury/Critical Illness/Hospital Care  Voluntary Pet Insurance, Legal Resources, and Identity Protection   Salaries are commensurate with experience and qualifications, as well as market and business considerations.  Colorado Pay Transparency Range: $110,000-$117,000 All qualified applicants will receive consideration for employment without regard to disability, status as a protected veteran or any other status protected by applicable federal, state, local, or international law.

Manufacturing Technology, Inc. Machine Control Software Engineer Job Label: Machine Control Software Engineer-2025 Are you a Software Engineer with in-depth programming experience in one programming technology?  Have you developed and maintained machine interface and machine control software? Are you looking for a consistently challenging opportunity with an industry leading, global manufacturing company that is thriving? For over thirty years, Manufacturing Technology, Inc. (MTI) has been combining sophisticated control systems with friction welding technology to create the world's leading automated friction welding equipment, friction welding technology and friction welding services. Our custom engineered solutions have served companies around the globe by solving their part joining and manufacturing problems in the most efficient way possible. Founded in 1926, Manufacturing Technology, Inc. (MTI) remains a family-owned South Bend, IN headquartered business which is currently operated by the 4th generation of the family.  MTI is the global leader in friction welding solutions with locations in the United States, United Kingdom, Slovakia and a majority-owned facility in India. Leveraging the outstanding MTI reputation and our strong customer relationships, MTI has developed a significant global presence as provider of critical friction welding solutions for Aerospace / Astrospace, Automotive, Military, Oil & Gas and Mining industries and boasts customers such as NASA, Boeing and large tier 1 automotive suppliers such as Rolls-Royce.  We are known as an independent, nimble, and fast responding partner for customized solutions. With over 250 global employees MTI generates over $40M in annual sales.  There are three main branches of the business: Friction Welding Machine Build, Resistance Welding in Europe and Contract Friction Welding.  If you would be new to South Bend, IN, please visit http://www.southbendin.gov to learn more about our vibrant and engaging community. MTI is a EOE/Affirmative Action and Drug Free Workplace. As a Machine Control Software Engineer for MTI, you will work with a multi-disciplined engineering team of Controls, Mechanical, and Fluid Power Engineers to provide a variety of machine control and machine interface solutions for industry titans that drive the world economy and lead technical advancements including: NASA, Honeywell, Boeing, Pratt and Whitney, and GE. This is an opportunity to bring together your years of experience and intimate programming knowledge to state-of-the-art, custom-engineered solid-state joining & welding solutions and equipment! Our Machine Control Software Engineer is based in South Bend, Indiana and has as a primary responsibility the development, documentation, integration and maintenance of control software for Friction Welding Machines. The software scope spans low-level device drivers through end-user HMI development and implementation.  An extensive background and demonstrated programming experience is necessary to interpret customer requirements and specifications and develop the technical requirement for the software and documentation needed.   This position designs and implements user interfaces and control software for manufacturing machinery.  This position also assists Controls Engineers as necessary with machine start-up, interface software commissioning, software de-bug and operational readiness of the machines.  Another key responsibility is the architecture and programming conventions of new software applications and active involvement in the improvement process for existing architecture and programming conventions.  Additionally, this position is relied upon to develop, advocate for and maintain programming techniques, standards, verification and validation methods. Therefore,  strong communications skills are critical in this role so that effective technical support to customers, Service Technicians and machine build and installation personnel is provided. Manufacturing Technology, Inc. (MTI) is an ISO 9001 registered company, we also provide contract services at our 65,000 facility in South Bend, IN.   This important role strives to achieve success by following MTI’s Core Values: Purposeful Innovation, MTI Family Company, Stellar Reputation, Customer Intimate, Supported Accountability, and An Environment Where You Are Expected to Contribute and Grow. Location: South Bend, IN The Challenge: MTI is a company in significant growth, and rapid development in terms of globalizing and becoming best in class. MTI is looking for driven, collaborative, and innovative people to help us achieve our goals. Job Type: Full-time                      This is not a remote position.  This position requires your onsite presence. Required Skills and Competencies   Experience with designing and developing WPF applications in the MS Visual Studio environment. Experience using XML within WPF applications in the MS Visual Studio environment. Experience with Industrial machine HMI development in a .NET framework environment. Strong background in object-oriented programming in a .NET framework environment. Experience with designing and specifying HMI software using UML. Experience with developing multi-threaded Windows applications. Experience with developing and interfacing C++ DLLs in .NET framework environment Strong working knowledge of streaming concepts. Experience with streaming using the of UDP protocol. Experience developing software deployment packages. Understanding of Distributed Real-Time Control Systems (DCS, SCADA)  Understanding of Hardware Abstraction Design and Implementation  Understanding of Motion Control of motors, actuators, etc.  Experience with Data Acquisition (DAQ, sensors, calibration, etc.)  Understanding of PLCs (functionality, communications, programming, tags, etc.)  Machine Networking (Ethernet, TCPIP, bus protocols (Modbus, Profibus, etc.), IoT, etc.)  Experience with Source Control using Subversion (SVN), GitLab Must have excellent communication skills Must possess good documentation methods and practices. The ability and willingness to learn new processes Must be eligible to work in the US permanently Must conduct oneself with the highest level of professional and ethical standards.   Preferred Skills or Competencies   Experience with Windows based Real-Time Graphics development Hydraulic controls experience MATLAB programming experience PLC programming experience Linux familiarity Data Acquisition systems programming experience Working knowledge of Signal Processing concepts and procedures. Working knowledge of PID Control fundamentals   Benefits: 401(k) matching Health Insurance: both High-Deductible HealthCare Plans and PPO available H.S.A. (for HDHP) Dental insurance Flexible working schedule Life insurance Paid time off, new hires receive 20 days per year 10 paid holidays Paid short term disability Continuing Education: Tuition reimbursement Vision insurance Employee Assistance Program Voluntary uniform service EV charging station for employees Schedule: Day shift To apply for this position or refer someone you know, please use our online interview system managed by HireMojo. Apply for this job https://app.hiremojo.com/mojo/ce/504921129/Manufacturing-Technology-Inc/Indiana/South-Bend/Software-Engineer?sourceType=9 Once you have completed the interview, your information will be forwarded to the recruiting team for decisions on next steps. Related Keywords: C, C++, WPF, VB, .NET Framework, .Net, programmer, software engineering, machine control, software engineer, machine diagnostic, heavy machinery, machine tools, HMI, flow charts, sequence of operations, controls, control systems, user interface, PLC

Resource Management Concepts, Inc. (RMC) provides high-quality, professional services to government and commercial sectors. Our mission is to deliver exceptional management and technology solutions supporting the protection and preservation of the people and environment of the United States of America. RMC is hiring a Program/Project Management Analyst to support our NAVAIR customer in Patuxent River, MD. The selected applicant will perform a variety of program and project management support activities, including, but not limited to: Applying analytic techniques in the evaluation of program/project objectives Analyzing requirements, status, budget, and schedules. Performing management, technical, or business case analyses Collecting, completing, organizing, and interpreting data relating to aircraft/weapon/project acquisition and product programs Tracking program/project status and schedules Applying Government-instituted processes for documentation, change control management, and data management Requirements A bachelor's degree and a minimum of three (3) years of relevant experience are required. An associate degree plus four (4) years of additional experience performing work related to the labor category functional description may be substituted for a Bachelor’s degree. An active DoD SECRET clearance is required to start.  The applicant may be subjected to a security investigation and must meet eligibility requirements for access to classified information. The applicant must meet the designated clearance requirements and certification requirements as established IAW the DoD Manual 8570 / 8140 Cyber Workforce Program. The applicant must have one of the following certifications to start: Security+ CE SecurityX (formerly CASP) CGRC (formerly CAP) GSLC CISM CISSP (or Associate) The applicant must be knowledgeable and proficient in the following: Program and project management Written and verbal communications Customer interfacing Ability to work within secure environments Benefits At RMC, we're committed to your career growth! RMC differentiates itself from other firms through its investment in our employees. We invest our resources to train, certify, educate, and build our employees. RMC can offer you a great place to work with a small company feel and give you the experience, tuition assistance, and certifications that will take your career to the next level. We offer Monday to Friday full-time day shift work and can assist in paid relocation. This also includes a competitive paid vacation package with 11 paid federal holidays. Additionally, we also offer high-quality, low-deductible healthcare plans, pet insurance, and a competitive 401K package. Salary at RMC is determined by various factors, including but not limited to location, a candidate's specific combination of education, knowledge, skills, competencies, and experience, as well as contract-specific requirements. The salary range for this position is $90,000 - $130,000.

We train and promote from within Excellent low-cost health benefits Retirement plan with employer-paid contributions Paid vacation and 10 holidays At Sierra Pacific Industries, we understand our greatest strength is the people who choose to build a career with us. We are a fourth-generation family-owned company that has grown to be one of the largest lumber and millwork producers in the United States. Our more than 6,000 employees are proud to work at our state-of-the-art sawmills and other facilities, including: manufacturing, custom wood-framed windows, fabrication, millwork, veneer, cogeneration, trucking, forestry, and other operations. We are seeking an experienced IBM i Application Development Manager to direct our IT team based at our main office in Anderson, California. This position is not remote and requires living in the surrounding areas. The successful applicant requires current authorization to work in the United States as Sierra Pacific does not provide a Visa sponsorship. Sierra Pacific is a family-oriented company where employees are respected, integrity is valued, and a strong work ethic is recognized and rewarded. We seek qualified IT professionals to become a valued members of our IT team that takes pride in effectively responding to business needs and directly contributing to the success of the company. About the Position Manage, motivate, and effectively supervise a team of Application Developers on the IBM i (Power Systems) platform Effectively discern user and business needs, translate those needs to actionable requirements, and communicate realistic expectations Engage with team members and end users to solicit collaboration, facilitate productivity, and clarify program intent Identify and schedule work to meet company priorities and goals Partner with other IT department managers to coordinate project activities and promote a team environment Utilize business and technology experience to solve problems and innovate diverse software solutions Provide technical support, mentorship, training, and cross-training for team members Collaborate, maintain heightened awareness, and ensure commitment to support of all security and compliance requirements and cyber response plans Effectively communicate with both technical and non-technical audiences of various levels within the Company Participate in staffing decisions Test, troubleshoot, and program as needed Qualifications Bachelor’s Degree in Software Engineering, Application Development, or related Computer Science program 3 years’ project lead or management/supervisory experience 5 years’ experience with RPG IV / ILE RPG in a business environment Demonstrated leadership, motivation, and interpersonal skills to foster positive relationships Experience in manufacturing and wood products is highly preferred Demonstrated sense of urgency and commitment to achieve efficient and accurate results Independently motivated, detail-oriented, and able to maintain focus on long-term projects Proven problem-solving and time-management skills Committed to the highest levels of integrity and ability to maintain confidentiality Why Join Our Team? Because this is more than an invitation, it's a commitment to offer opportunities for personal and professional growth to everyone! We ask people to grow with us and make the company even better. We provide an excellent benefit package including a full Health Benefits Plan (including medical, dental, and vision) with low-cost premiums, a 401(k) with Company Match, additional Retirement Contributions, and company-paid Life Insurance. How to Apply If you are qualified and would like to join our team, please send a cover letter referencing this position and a resume to: Sierra Pacific Industries Human Resources PO Box 496011 Redding, CA 96049 (866) 378-8001 or apply online and view all our career opportunities at: spi.careers Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans. The general wage range for this position at Sierra Pacific Industries is from $135,000 to $195,000 per year, and is dependent upon a number of factors, including, but not limited to: relevant work experience, skill, knowledge, and/or education. About Our Company Sierra Pacific Industries is a fourth-generation family-owned company based in Northern California that started in 1949 and has grown to be one of the largest lumber and millwork producers in the U.S., employing around 6,500 crew members. Sierra Pacific continues to be a company where its employees are proud to work at state-of-the-art facilities and others strive to become part of the team. We own and sustainably manage more than 2.4 million acres of timberland in California, Oregon, and Washington. Our forests are sustainably managed under a 100-year plan by Registered Professional Foresters, Wildlife Biologists, Botanists, and other professionals. We are growing forests for our future, planting over 6 million new trees every year. In Spring 2024, we planted our 300 millionth seedling on our timberlands. This milestone was decades in the making, reflecting our commitment to sustainable forest management and ensuring we have forests not just for today, but for generations to come. Sierra Pacific effectively uses nearly 100% of every piece of wood we bring to our facilities. In fact, any small amount that isn't turned into hand-crafted doors and windows, millwork, lumber, or landscaping material is actually converted into electricity in our eight biomass-fueled power plants. We are proud that all Sierra Pacific facilities follow our drug-free and tobacco-free policies. As part of our safety in the workplace policy, an offer of employment is subject to a negative drug screen result. We use E-verify to verify the social security number and work authorization of all newly hired employees. Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans.

Modern Construction Services specializes in the renovation and commercial construction of warehouses, distribution centers, retail, business offices, restaurant, and healthcare related properties. The Commercial Project Manager is responsible for managing small-scale commercial construction projects, including renovations, retrofits, and upgrades to existing facilities. This role is ideal for experienced construction professionals seeking to advance toward a Project Manager position. Annual Salary: $75,000.00 - $110,000.00, depending on experience. This salary range reflects a scale from a competent early-career project specialist to a highly experienced, leadership-level project manager who adds strategic value to the organization. Key duties include developing scopes of work, soliciting and evaluating subcontractor bids, and overseeing project execution through completion. The successful candidate will demonstrate strong analytical skills, strategic planning capabilities, and effective leadership to ensure projects are delivered on time and within budget. Requirements Prepare detailed cost estimates for commercial reconstruction projects (materials, labor, equipment, subcontractors). Review architectural and engineering drawings to determine scope and requirements. Solicit and evaluate bids from subcontractors and suppliers. Develop budgets and proposals for clients and internal stakeholders. Analyze historical data and market trends to improve accuracy of estimates. Value engineering to identify cost-saving opportunities without compromising quality. Plan, coordinate, and oversee all phases of construction projects from pre-construction to closeout. Develop project schedules, timelines, and milestones. Manage subcontractors, vendors, and internal teams to ensure timely and quality execution. Monitor project budgets and control costs throughout the project lifecycle. Ensure compliance with safety regulations, building codes, and company standards. Communicate with clients, architects, engineers, and other stakeholders regularly. Skills & Qualifications: Strong knowledge of construction methods, materials, and regulations. Proficiency in estimating software (e.g., Bluebeam, PlanSwift, etc.). Experience with project management tools (e.g., Procore, BuilderTrend, Fieldwire, etc.). Excellent analytical, organizational, and communication skills. Ability to read and interpret blueprints and technical documents. Bachelor's degree in Construction Management, Civil Engineering, or related field (preferred). 3+ years of experience in commercial construction estimating and/or project management. Benefits Competitive, performance-based bonus paid quarterly. Annual profit sharing. Medical, vision, and dental. Flexible Spending Account (FSA), Health Saving Account (HSA). Employer-paid Basic Term Life Insurance, Short- and Long-term disability insurance. Voluntary supplemental life insurance. 401(k).