Warehouse Administrative Clerk/ $16.50- Urgent (San Antonio)

Position summary: This role is more than a rank-and-file machinist or a “just make this part” machinist. It is an “R&D machinist” with a designer’s mind, who is a problem solver, conceptual thinker, and who is eager to figure it out, through individual effort as well as in collaboration with the team. This position will be largely centered around programming and machining custom parts in one-off or small batch quantity, which may need redesign or rework as the project progresses. Medium-sized, production-style machining projects may also be required. Most parts are designed from scratch by in-house designers, and this position will require fluency with CAD software (Solidworks), not just CAM, as it is expected that machinists can conceptualize and draw a design in CAD, not just carry out the steps to machine it. Essential Responsibilities: Run CNC equipment (and manual machines as necessary) in production and prototyping capacities Run multiple machines simultaneously as required Check and monitor parts being run; maintain attention to detail in every aspect of the project Program parts using Fusion 360 and HSM Works Have proficiency with Solidworks design software Create, interpret and revise manufacturing drawings Perform typical post-production such as deburring, polishing, etc. Perform QC and dimensional verification to ensure standards are met Perform daily and periodic maintenance on machines (fluid levels, chip clearing, etc.) Be accountable and on time; maintain clean and orderly workspace Work as a team member and maintain a scrutinous eye for ways that a part or a project could be improved (this is not simply button pushing or "turn off your brain" machining) At times between machining projects, contribute to the R&D effort through CAD work or collaborative problem solving with other members of the design and manufacturing team as required Education and Experience: Trade school for machining practices or equivalent experience Proficiency in basic math required for programming and machining Design experience in the form of product development or engineering, etc. Examples of personal projects and/or creative exploration and self-education are preferred Metal fabrication and general shop work experience preferred Proficiency in CAM programming in HSM Works/Fusion 360, including advanced techniques like multi-axis and 3D toolpaths. Nice to have: Existing familiarity with HAAS/PROTOTRAK/TRAK mills and lathes Experience in an ISO / ITAR setting Experience with a Quality Management System (QMS) Experience operating a CMM Physical Requirements: Ability to sit or stand for extended periods of time Operate in a shop environment that is frequently noisy Wear proper PPE as required by task Lift or move approximately 10-50 lbs regularly Operate small forklift or pallet jack Occasionally assist team members in other projects throughout the shop, like relocating equipment, etc. Use hand and power tools (with wood and metal) in a basic or “homeowner” capacity at a minimum Compensation/benefits: Flexible work schedule including opportunities for occasional remote work After-hours access to the R&D Shop for personal projects Comprehensive benefits program including subsidized medical, dental, and vision insurance for employees Eligible for Overtime Pay Company 401(k) plan 14 days of PTO (7 sick days and 7 vacation days) 8 paid Holidays We are ultimately seeking talented individuals with a wide range of experience and abilities. Prospective applicants whose work experience is more firmly rooted on the design/engineering side but still have strong abilities in machining and programming are encouraged to apply. This job description is not exhaustive and the position may include additional responsibilities and expectations not listed here. This job posting is not an employment contract, and employees of this company are employed on an “at will” basis and may be terminated at any time. Please respond with resume and a brief introduction, and include your email address in the subject line.

Position summary: Operate CNC press brake and laser cutting equipment, in both a prototyping and production capacity. Conduct “job shop” sheet metal work to fulfill new or existing production orders, on a recurring and repeat basis, according to required delivery schedules. In addition to production work, conduct R&D sheet metal work, in the form of short run/one-off projects to prototype new designs as they are created, and provide design input and feedback as applicable to improve and help create new designs. Manage the production schedule and keep a running priority of existing and upcoming work to ensure deadlines are met, for both R&D and production jobs. Employee is expected to carry a manufacturing project from raw material, through production, to packaging and prep for shipping. Ideal applicant has experience in welding, as well as other manufacturing processes like fastener installation and using hand/power tools, although these abilities can be trained on the job to a certain extent. Primary materials to be used are mild steel, stainless steel and aluminum, with potential to use additional materials as required. Employee may be needed to deliver parts directly to clients, generally located in the greater Seattle area. Nice-to-have: Experience with a modern Amada control interface Advanced fabrication techniques (skilled in MIG/TIG welding, etc.) Essential Responsibilities: Run CNC sheet metal equipment: laser cutting and brake forming (and manual machines as applicable) in production and prototyping capacities Run multiple machines simultaneously as required, and/or bounce back and forth between machines Check and monitor parts being run; maintain attention to detail in every aspect of the project Program parts at the console Familiarity with speccing/installing hardware Interpret and work off of manufacturing drawings Perform typical post-production such as deburring, polishing, cleaning, etc. Perform QC and dimensional verification to ensure standards are met and maintained Perform daily and periodic maintenance on machines (fluid levels, chip clearing, etc.) Be accountable and on time; maintain clean and orderly workspace Work as a team member and maintain a scrutinous eye for ways that a part or a project could be improved (this role is not simply button pushing or "turn off your brain" production) In downtime between projects, contribute to the R&D/production effort through collaborative problem solving with other team members, and assist with other projects Education and Experience: Trade school for sheet metal manufacturing, or equivalent experience Proficiency in basic math required for programming and operation of machines Examples of personal projects and/or creative exploration and self-education are preferred Metal fabrication and general shop work experience preferred Bonus points if applicants are already familiar with Laguna laser cutters and Amada press brakes Physical Requirements: Ability to sit or stand for extended periods of time Operate in a shop environment that is frequently noisy Wear proper PPE as required by task Lift or move between 10-50 lbs regularly Operate small forklift or pallet jack Occasionally assist team members in other projects throughout the shop, like relocating equipment, etc. Use hand and power tools (with wood and metal) in a basic or “homeowner” capacity at a minimum Compensation/benefits: Flexible work schedule including opportunities for occasional remote work After-hours access to the R&D Shop for personal projects Comprehensive benefits program including subsidized medical, dental, and vision insurance for employees Eligible for Overtime Pay Company 401(k) plan 14 days of PTO (7 sick days and 7 vacation days) 8 paid Holidays This job description is not exhaustive and the position may include additional responsibilities and expectations not listed here. This job posting is not an employment contract, and employees of this company are employed on an “at will” basis and may be terminated at any time. Please respond with resume and a brief introduction, and include your email address in the subject line.

We are a NY based consulting firm searching for credentialed US tax practitioners (EA/CPA/JD) with experience preparing 1040's, 1065's and 1120S's. This customer-facing position runs from Dec-April with the possibility of working Sept- October. We provide: a computer, flex-schedule, hourly compensation (start at $30/hr), 401K, PTO, training. No restrictions on your own practice. You will need: hard-wired internet connection (No wi-fi), ability to pass a background check, active PTIN, fluency in English. You must work from the US (no exceptions). We are a growing firm with an excellent track record and good reputation that thrives on collaboration among its employees. Send your full name, a brief explanation of your tax experience, credential, email and phone.

The Little Red Day Spa is growing. We are looking for 2 licensed massage therapists. Our spa offers a premier experience in high quality and very unique suites specializing in services for couples. Our clients come to relax and reconnect with themselves and each other. They are not coming for injury recovery or chronic pain. This is relaxing salon style massage. You can work as much or as little as you want. Since we don’t get or take walk-ins, all appointments are booked in advance so we schedule therapists a day in advance. There are no set hourly or weekly schedules. We are open 7 days a week and are busiest on the weekends. You may choose to be a w2 employee or an independent contractor. We welcome LMP’s at all levels of experience. However, we are looking for people who understand and appreciate the unique vibe and mission of the spa at whatever level of experience. We have a dream team of wonderful people as therapists and our receptionist staff. Please take a look at our website to get a look at what the spa looks like and what you work environment would be like. Www.LittleRedDaySpa.com

Established downtown practice seeking a RDA or CDA extraordinaire with 2+ years experience. We are looking for an energetic team player that possesses excellent communication skills and an outstanding work ethic. Experience with Dentrix and Dexis a plus! We offer a competitive wage of, $29/hr - $34/hr DOE, with benefits including medical insurance, in-house dental, paid vacation and sick leave, paid holidays, plus a loaded ORCA card or parking reimbursement and a $500 signing bonus after 6 months. We work a four-day work week from 8:00 AM to 5:00 PM alternating Mondays and Fridays, giving you a four-day weekend (mini vaca) every other week. If this sound like your perfect job, please submit your cover letter and resume with references. We look forward to hearing from you!

Job Offer: Etsy Shop Manager Position: Etsy Shop Manager Location: Remote / Flexible Hours: Part-time (10–20 hours per week, with potential to grow) Start Date: ASAP About the Shop: We’re a start-up Etsy shop focused on curated vintage finds, home décor, and one-of-a-kind treasures sourced from thrifting, estate sales, and unique collections. With an eye for design and storytelling, we want a beautiful, welcoming shop that helps customers find pieces they’ll love for years to come. Role Overview: We’re looking for an organized, creative, and detail-oriented Etsy Shop Manager to help run daily operations and grow the shop’s presence. Key Responsibilities: Create and optimize product listings (titles, descriptions, tags, photos) Manage shop inventory and organize new listings from incoming finds Track orders, shipping Research SEO keywords and trending styles for visibility Assist with shop branding, social media posts, and occasional promotional ideas Monitor analytics to improve shop performance Qualifications: Experience with Etsy (as a seller, manager, or frequent buyer) Strong writing and editing skills for product descriptions Attention to detail and aesthetic sense Basic photo editing and familiarity with SEO best practices Friendly, responsive communication style Bonus Skills: Knowledge of vintage or home décor categories Experience in social media marketing or photography Graphic design (Canva or similar tools) Compensation: Hourly rate based on experience, plus potential performance bonuses as the shop grows. How to Apply: Please send a brief introduction, examples of your past Etsy or e-commerce work, and a note on why you’d love to help manage this shop to staging@revealnw.com.