HVAC Apprentice

LOCATION AREA: Uptown Denver (Near Benedict Fountain Park) SCHEDULE: Monday-Friday 9:00 am - 6:00 pm | Availability for on-call emergencies SUMMARY: Under the direct supervision of General Manager, the Building Engineer will be responsible for delivering and maintaining all facilities of a residential high-rise building. The primary expectation for this role is to maintain and preserve the life of all common area equipment, both interior and exterior, while ensuring compliance with all City, County, State, OSHA, and governmental regulations. ROLE: · Manage the engineering and maintenance of a residential facility, including common areas, amenity spaces, and parking garage. · Conduct quarterly cost analyses for maintenance items, including filters, belts, valves, and parts. · Perform efficiency analysis and energy savings audits quarterly. · Create, execute, and maintain an automated preventative maintenance program for all building components. · Implement and maintain all required maintenance Standard Operating Procedures (SOPs) as directed by GM and VP of Risk Management. · Coordinate, maintain, and keep current all inspections for building components. · Supervise the maintenance team, contractors, and any other departments as assigned by the GM, ensuring excellence in job performance through training. · Build and maintain strong relationships with outside vendors. · Coordinate contracted services and repairs in conjunction with the GM. · Maintain complete and accurate records of all maintenance requests submitted, commented on, and completed. · Available for on-call emergencies after hours, weekends, and holidays as needed. · Ensure all safety precautions and procedures are followed while performing assigned duties. · Competent in addressing water-based/plumbing emergencies (Note: This role does not perform non-emergency plumbing repairs). · Willing and able to perform minor work including painting, cosmetic repairs, light fixture installations, damper actuators, etc. · Exhibit good communication skills with the team, management, and association owners to support the community. Requirements · Minimum of 3-5+ years of engineering or maintenance experience. · Intermediate knowledge of involved trades including electrical, plumbing, fire systems, elevators, and mechanical systems. · Ability to read and interpret building design drawings. · Knowledge of annual inspections. · Maintenance knowledge of: o HVAC water-based cooling and heating systems (Cooling towers, water source heat pumps, looped systems). o Domestic water and sump pumps. o Fire pump control and safety systems. o Trash rooms/compactors. · Experience with BuildingLink or comparable facilities/CRM software preferred. Benefits $1,000 USD bonus awarded upon completion of 6 months of employment Medical Dental Vision Short term disability (STD) Long term disability (LTD) Employee assistance program (EAP) Identity theft protection Pet insurance  Retirement Paid Time Off (PTO)

Adaptive Property Solutions provides building documentation services nationwide. We are seeking an individual to perform architectural as-built field verification services at commercial spaces in Sacramento, CA. In our process, we perform a 3DVR scan to generate a point cloud, which we use to create as-built drawings in Revit. We need a local field tech to provide interior confirming measurements and exterior elevation sketches. Architects, Engineers, Drafters, and individuals with experience in commercial construction are well-suited to perform these surveys. We are seeking to establish a long-term relationship to meet future demand in the area. If you are interested, please respond with your phone number, email address, and resume.

You’ll be responsible for participating in the design process preparing thorough mechanical drawings and details. The work includes engineering design analysis for plumbing systems including water, waste and vent and HVAC systems including floor plans and schedules, and general research of new technologies as applicable. Requirements The successful candidate will: Learn the primary drafting tools, Revit and AutoCAD, as well as engineering analysis tools. Participate in development of mechanical designs from concept through completion of construction. Prepare engineering design calculations, create layouts, and write detailed engineering reports. Live out and uphold our values – Family, Service, and Trust. Live out and uphold our brand – Connections. Qualifications: Pursuing a Bachelor of Science Degree in Mechanical Engineering from an ABET accredited program; Sophomore, Junior or Senior level mechanical engineering student if seeking an internship. Minimum GPA of 3.0. Pay: $25/hr Benefits At Emanuelson-Podas, we're always looking for skilled, energetic, loyal talent that shares our company values and commitment to engineering excellence. We offer interns competitive wages and an on-site fitness studio and trainer (Minneapolis).

DraftWorks Architecture is seeking a Licensed Architect (California) for ongoing freelance, project-based collaboration. About the Role: You’ll handle plan drafting, HOA submissions, and city permitting for residential projects such as garage-to-ADU conversions, remodels, and additions. Perfect for an independent architect seeking flexible, steady project work without full-time commitment. Responsibilities: Prepare and stamp plan sets for City of Sacramento and HOA approval Coordinate with homeowners, engineers, and city planning departments Respond to plan check comments and maintain project compliance Provide design input and revisions as needed Requirements: Active California Architectural License (required) Minimum 1 year of residential design and permit experience Skilled in AutoCAD or Revit Reliable communication and attention to deadlines Compensation: Per-project pay depending on scope (average $1,500–$3,500 per project) We average 10–20 projects per month, offering a consistent stream of work with flexible scheduling. Flexible schedule – remote or local collaboration Paid directly per approved project phase Travel reimbursement is provided for occasional site visits (measurements, inspections, or HOA review meetings) within the Bay Area or Sacramento region. About Us: DraftWorks Architecture is an independent Sacramento-based design firm specializing in ADUs, remodels, additions, and permitting. We focus on simplifying the design-to-permit process for homeowners while maintaining professional design quality.

You'll be responsible for participating in the design process preparing thorough electrical drawings and details. The work includes engineering design analysis for short circuit fault current, arc flash hazard, photometric anaylsis, voltage drop, load flow analysis, and general research of new technologies as applicable. Requirements The successful candidate will: Learn the primary drafting tools, Revit and AutoCAD, as well as engineering analysis tools such as SKM Power Tools for fault current studies and AGI for photometric analysis. Participate in development of electrical designs from concept through completion of construction. Prepare engineering design calculations, create layouts, and write detailed engineering reports. Live out and uphold our values - Family, Service, and Trust. Live out and uphold our brand - Connections. Qualifications: Pursuing a Bachelor of Science Degree in Electrical Engineering; Sophomore, Junior or Senior level electrical engineering student. Minimum GPA of 3.0. Must be authorized to work in the United States. Pay: $25/hr Benefits At Emanuelson-Podas, we're always looking for skilled, energetic, loyal talent that shares our company values and commitment to engineering excellence. We offer interns competitive wages and an on-site fitness studio and trainer (Minneapolis).

BMA Mechanical+ is a company for problem solvers, innovators, and team players. We get excited about things like saving energy and water, designing with the latest and greatest, and helping our customers achieve their vision. Our mission is to develop, support, and shape the built environment with innovative, resilient, and sustainable solutions. We call it the California Standard. Job description:  As an HVAC & Plumbing Drafter/Specialist or Designer, your primary responsibility is to support the design and engineering teams by creating detailed and accurate drawings using relevant software and tools. Specializing in HVAC and plumbing engineering, you play a crucial role in translating conceptual designs into comprehensive, precise, and technically sound construction documents. Your role involves collaboration with architects, engineers, and other stakeholders to ensure that the HVAC and plumbing systems are efficiently integrated into the overall building design. This is a full-time in-office position. Role & Responsibilities: Ensure accuracy and compliance with industry standards and project specifications. Ensure Seamless Integration of HVAC and Plumbing Systems. Must be familiar with building codes, standards and regulations related to HVAC and plumbing systems. Ability to take on and complete tasks independently and/or with a team. Timely resolution of design-related issues through effective communication. Stay Technologically Current with awareness and application of the latest developments in relevant software tools. Team player. Qualifications: Proficiency in using AutoCAD is required. 3+ years working in Architecture/Engineering/Construction field is preferred Preferred Software skills: AutoCAD, Bluebeam, MS Office365 & REVIT A growth mindset is essential. What we offer: We encourage a healthy work/life balance and are dedicated to cultivating an excellent work atmosphere for our team. Our benefits package includes generous vacation time, paid holidays, medical, dental, vision benefits, Annual bonus, 401(k) retirement plan with matching contributions. We promote a healthy work/life balance.  For consideration, please provide a cover letter that includes information on why you are interested in this position as well as a detailed resume. Please apply online with BMA Mechanical+ at: https://bmamechanical.hiringthing.com/job/877820/plumbing-drafter-specialist-junior-plumbing-designer?s=cl