Warehouse work in Pico Rivera M-F 7-3:30 (Pico Rivera)

Job Title: Welder (Exentec) Discover your exciting role Our people are our success. As one of us, you will contribute to engineering excellence for the high-tech markets of the future, including semiconductors, batteries, pharmaceuticals, biotechnology, and data centers. At Exentec, you will be part of a global community of challenge seekers who are ambitious and passionate about innovation. Together, we will build on our company’s long history and keep on leading the way to a better world. The primary responsibilities of this position include performing GTAW and GMAW in a manner that ensures the production of our high-quality line of PSP® products. Explore your tasks and responsibilities • Set up the work area, select and verify the material for production, and meet the daily welding production and quality demands of the Weld Shop. • Weld the following in different positions and on different gauges: stainless steel and black iron. Occasionally expected to weld other materials. • Troubleshoot the welding equipment. • Comply with health, safety, (including OSHA), and environmental procedures, and ensure the cleanliness of the area. • Comply with established production philosophies designed to increase production, safety and/or quality, e.g., Lean Manufacturing, 5s and TWI methodologies. • Continue to learn and expand one’s capacity within this job by increasing knowledge and skill base. • Perform various other assignments per Department Lead’s direction. • Other duties and related work may be assigned as necessary Show your expertise • Preferably a minimum of 1 year of experience performing GTAW or GMAW welding. • Strong GMAW, GTAW welding skills and a knowledge of how all the equipment operates. • Able to read and understand cut sheets and engineering prints thoroughly. • Knowledge of basic metallurgy and weld symbols • Able to speak and understand English, with a focus on following directions, adhering to basic shop safety procedures, and meeting production standards. • Knowledge of basic sheet metal layout. • Math skills include basic arithmetic and geometry. • Can accurately read a tape measure to 1/16" • Good communication and teamwork skills. Physical Demands • Frequent standing, bending, sitting, and use of hands is required • Specific vision abilities required to include close vision, and ability to adjust focus • Occasionally perform physical activities including lifting (up to 50 lbs. unassisted) Non-Solicitation We are not currently accepting third-party agency candidates for this position. Any agency candidate submitted to any employee of Exyte or TFS may be contacted by Exyte or TFS without obligation to the third-party agency. Employment Sponsorship Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor employment visas at this time. EEO Statement Exyte US, Inc. and its subsidiaries are proud to be an Equal Employment Opportunity employer that is committed to supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by applicable federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact Clinton Crellin via E-Mail at clinton.crellin@exyte.net Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.

Electricians earn $39.79 per hour We train and promote from within Excellent low-cost health benefits Retirement plan with employer-paid contributions Paid vacation and 10 holidays At Sierra Pacific Industries, we understand our greatest strength is the people who choose to build a career with us. We are a fourth-generation family-owned company that has grown to be one of the largest lumber and millwork producers in the United States. Our more than 6,000 employees are proud to work at our state-of-the-art sawmills and other facilities, including: manufacturing, custom wood-framed windows, fabrication, millwork, veneer, cogeneration, trucking, forestry, and other operations. Currently, we are seeking a qualified night shift Electrician to work collaboratively with our sawmill located in Centralia, Washington. About the Position Install, maintain, and repair electrical systems and equipment in manufacturing facility Maintain all components required to control machinery, including switches, sensors, programmable logic controllers, variable frequency drives, and operate interface units Recognize and effectively identify hazards and correct electrical defects Perform preventative maintenance on all electrical systems and equipment Inspect and maintain motors, switches, junction boxes, switch panels, circuit breakers, transformers, fuse panels, and lighting Read and interpret blueprints, schematics, and electrical specifications to determine layout of industrial electrical installations Install electrical conduit and pull wire Maintain efficiency and safety of all plant electrical circuits, assembles, and equipment Troubleshoot and install encoders, linear transducers, vision systems, and other advanced sensors Identify and help implement process improvements to optimize performance and production Effectively troubleshoot issues for best resolution while staying calm in stressful situations Communicate effectively, comprehend, and follow complicated verbal and written instructions Perform general maintenance in a safe and efficient manner and maintain a clean work area Work may consist of overtime during busy production times Qualifications 2 years’ recent verifiable related work history or equivalent education Understanding of industrial electrical safety, MCCs, three-phase power, running conduit, lighting, electrical, and hydraulic systems required Familiarity with programmable logic controllers and their programming, preferable Read and understand blueprints and circuit diagrams Why Join Our Team? Because this is more than an invitation, it's a commitment to offer opportunities for personal and professional growth to everyone! We ask people to grow with us and make the company even better. We provide an excellent benefit package including a full Health Benefits Plan (including medical, dental, and vision) with low-cost premiums, a 401(k) with Company Match, additional Retirement Contributions, and company-paid Life Insurance. How to Apply If you are qualified and would like to join our team, please apply in person Monday through Friday from 9am to 3pm. Let’s talk! Sierra Pacific Industries 3115 Kuper Road Centralia, WA 98531 (360) 623-1285 Interested in SPI, but not this opportunity? View all opportunities at: spi.careers Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans. About Our Company Sierra Pacific Industries is a fourth-generation family-owned company based in Northern California that started in 1949 and has grown to be one of the largest lumber and millwork producers in the U.S., employing around 6,500 crew members. Sierra Pacific continues to be a company where its employees are proud to work at state-of-the-art facilities and others strive to become part of the team. We own and sustainably manage more than 2.4 million acres of timberland in California, Oregon, and Washington. Our forests are sustainably managed under a 100-year plan by Registered Professional Foresters, Wildlife Biologists, Botanists, and other professionals. We are growing forests for our future, planting over 6 million new trees every year. In Spring 2024, we planted our 300 millionth seedling on our timberlands. This milestone was decades in the making, reflecting our commitment to sustainable forest management and ensuring we have forests not just for today, but for generations to come. Sierra Pacific effectively uses nearly 100% of every piece of wood we bring to our facilities. In fact, any small amount that isn't turned into hand-crafted doors and windows, millwork, lumber, or landscaping material is actually converted into electricity in our eight biomass-fueled power plants. We are proud that all Sierra Pacific facilities follow our drug-free and tobacco-free policies. As part of our safety in the workplace policy, an offer of employment is subject to a negative drug screen result. We use E-verify to verify the social security number and work authorization of all newly hired employees. Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans.

Mall shop needs a fabricator/ installer Top pay DOE

Position summary: Operate CNC press brake and laser cutting equipment, in both a prototyping and production capacity. Conduct “job shop” sheet metal work to fulfill new or existing production orders, on a recurring and repeat basis, according to required delivery schedules. In addition to production work, conduct R&D sheet metal work, in the form of short run/one-off projects to prototype new designs as they are created, and provide design input and feedback as applicable to improve and help create new designs. Manage the production schedule and keep a running priority of existing and upcoming work to ensure deadlines are met, for both R&D and production jobs. Employee is expected to carry a manufacturing project from raw material, through production, to packaging and prep for shipping. Ideal applicant has experience in welding, as well as other manufacturing processes like fastener installation and using hand/power tools, although these abilities can be trained on the job to a certain extent. Primary materials to be used are mild steel, stainless steel and aluminum, with potential to use additional materials as required. Employee may be needed to deliver parts directly to clients, generally located in the greater Seattle area. Nice-to-have: Experience with a modern Amada control interface Advanced fabrication techniques (skilled in MIG/TIG welding, etc.) Essential Responsibilities: Run CNC sheet metal equipment: laser cutting and brake forming (and manual machines as applicable) in production and prototyping capacities Run multiple machines simultaneously as required, and/or bounce back and forth between machines Check and monitor parts being run; maintain attention to detail in every aspect of the project Program parts at the console Familiarity with speccing/installing hardware Interpret and work off of manufacturing drawings Perform typical post-production such as deburring, polishing, cleaning, etc. Perform QC and dimensional verification to ensure standards are met and maintained Perform daily and periodic maintenance on machines (fluid levels, chip clearing, etc.) Be accountable and on time; maintain clean and orderly workspace Work as a team member and maintain a scrutinous eye for ways that a part or a project could be improved (this role is not simply button pushing or "turn off your brain" production) In downtime between projects, contribute to the R&D/production effort through collaborative problem solving with other team members, and assist with other projects Education and Experience: Trade school for sheet metal manufacturing, or equivalent experience Proficiency in basic math required for programming and operation of machines Examples of personal projects and/or creative exploration and self-education are preferred Metal fabrication and general shop work experience preferred Bonus points if applicants are already familiar with Laguna laser cutters and Amada press brakes Physical Requirements: Ability to sit or stand for extended periods of time Operate in a shop environment that is frequently noisy Wear proper PPE as required by task Lift or move between 10-50 lbs regularly Operate small forklift or pallet jack Occasionally assist team members in other projects throughout the shop, like relocating equipment, etc. Use hand and power tools (with wood and metal) in a basic or “homeowner” capacity at a minimum Compensation/benefits: Flexible work schedule including opportunities for occasional remote work After-hours access to the R&D Shop for personal projects Comprehensive benefits program including subsidized medical, dental, and vision insurance for employees Eligible for Overtime Pay Company 401(k) plan 14 days of PTO (7 sick days and 7 vacation days) 8 paid Holidays This job description is not exhaustive and the position may include additional responsibilities and expectations not listed here. This job posting is not an employment contract, and employees of this company are employed on an “at will” basis and may be terminated at any time. Please respond with resume and a brief introduction, and include your email address in the subject line.

Apogee Electronics is a leading designer and manufacturer of products for audio recording in the music, film, digital streaming, and voice-over industries. Based in Santa Monica, CA, and founded in 1985, Apogee has consistently created innovative and award-winning technology recognized globally as an industry leader in professional and consumer audio. Throughout our 37-year history, we have been instrumental in capturing countless GRAMMY and OSCAR-winning performances by today’s most successful artists. Job Overview We’re seeking a strategic, hands-on Project Manager with experience in electronics manufacturing and managing contract manufacturers. This role will lead core operational functions—production, inventory forecasting, vendor relationships, and new product introduction—while providing oversight of warehousing, logistics, compliance, and cost management, in close collaboration with the CEO and cross-functional teams. Key Responsibilities Production Management: Oversee production schedules, CM coordination, and quality processes; resolve production issues to meet deadlines. Inventory & Forecasting: Manage raw material and finished goods levels, reconcile inventory, and align supply with demand. Vendor & CM Management: Handle contracts, pricing, performance, and inventory with contract manufacturers and suppliers. New Product Introduction (NPI): Partner with Engineering to launch new products into production, ensuring operational readiness. Oversight (executed by the Ops team): Warehousing – Ensure safe, efficient storage of materials and finished goods Supply Chain – Guide supplier selection and delivery timelines Quality Control – Oversee QA processes and improvements Logistics – Monitor fulfillment and outbound shipping Cost Management – Drive cost reduction while maintaining quality Compliance – Ensure regulatory and safety compliance Qualifications 7+ years in operations or supply chain (electronics or hardware preferred) Proven experience managing contract manufacturers Expertise in production planning, forecasting, and vendor negotiation Proficiency in ERP systems and operational reporting Strong leadership, communication, and strategic execution skills Bachelor's degree in Operations, Engineering, Business, or related field What We Offer Flexible part-time schedule (~25 hours/week) A collaborative, innovation-driven culture Opportunity in a globally respected electronics company Competitive compensation The job is in-person.

Position summary: This role is more than a rank-and-file machinist or a “just make this part” machinist. It is an “R&D machinist” with a designer’s mind, who is a problem solver, conceptual thinker, and who is eager to figure it out, through individual effort as well as in collaboration with the team. This position will be largely centered around programming and machining custom parts in one-off or small batch quantity, which may need redesign or rework as the project progresses. Medium-sized, production-style machining projects may also be required. Most parts are designed from scratch by in-house designers, and this position will require fluency with CAD software (Solidworks), not just CAM, as it is expected that machinists can conceptualize and draw a design in CAD, not just carry out the steps to machine it. Essential Responsibilities: Run CNC equipment (and manual machines as necessary) in production and prototyping capacities Run multiple machines simultaneously as required Check and monitor parts being run; maintain attention to detail in every aspect of the project Program parts using Fusion 360 and HSM Works Have proficiency with Solidworks design software Create, interpret and revise manufacturing drawings Perform typical post-production such as deburring, polishing, etc. Perform QC and dimensional verification to ensure standards are met Perform daily and periodic maintenance on machines (fluid levels, chip clearing, etc.) Be accountable and on time; maintain clean and orderly workspace Work as a team member and maintain a scrutinous eye for ways that a part or a project could be improved (this is not simply button pushing or "turn off your brain" machining) At times between machining projects, contribute to the R&D effort through CAD work or collaborative problem solving with other members of the design and manufacturing team as required Education and Experience: Trade school for machining practices or equivalent experience Proficiency in basic math required for programming and machining Design experience in the form of product development or engineering, etc. Examples of personal projects and/or creative exploration and self-education are preferred Metal fabrication and general shop work experience preferred Proficiency in CAM programming in HSM Works/Fusion 360, including advanced techniques like multi-axis and 3D toolpaths. Nice to have: Existing familiarity with HAAS/PROTOTRAK/TRAK mills and lathes Experience in an ISO / ITAR setting Experience with a Quality Management System (QMS) Experience operating a CMM Physical Requirements: Ability to sit or stand for extended periods of time Operate in a shop environment that is frequently noisy Wear proper PPE as required by task Lift or move approximately 10-50 lbs regularly Operate small forklift or pallet jack Occasionally assist team members in other projects throughout the shop, like relocating equipment, etc. Use hand and power tools (with wood and metal) in a basic or “homeowner” capacity at a minimum Compensation/benefits: Flexible work schedule including opportunities for occasional remote work After-hours access to the R&D Shop for personal projects Comprehensive benefits program including subsidized medical, dental, and vision insurance for employees Eligible for Overtime Pay Company 401(k) plan 14 days of PTO (7 sick days and 7 vacation days) 8 paid Holidays We are ultimately seeking talented individuals with a wide range of experience and abilities. Prospective applicants whose work experience is more firmly rooted on the design/engineering side but still have strong abilities in machining and programming are encouraged to apply. This job description is not exhaustive and the position may include additional responsibilities and expectations not listed here. This job posting is not an employment contract, and employees of this company are employed on an “at will” basis and may be terminated at any time. Please respond with resume and a brief introduction, and include your email address in the subject line.