Assembly and Rack Associate (Poway, CA)

Sigray, Inc. has an immediate need for a Manufacturing Technician. This is an excellent opportunity to work for a rapidly growing company under the guidance and mentorship of leading experts in the X-ray instrumentation field. The team is looking for a Manufacturing Technician to support our team in building state-of-the-art X-ray microscopes and instruments used by some of the most prominent scientists and institutions in the world. The ideal candidate will have: -Knowledge of sub-assemblies -Basic knowledge of reading schematics -Cable building experience -Knowledge of basic electronic components, motors, encoders, limits -Understanding of basic electronics – voltages, polarity, multimeter -Soldering experience Skills: -Problem-solving and troubleshooting skills -Excellent written and verbal communication skills -Excellent analytical skills, both data analysis and critical thinking -Ability to multitask and set priorities according to current demands -Experience with hand tools -Ability to deliver solutions in tight deadlines Qualifications: -1-3 years experience as a technician -Experience working on large complex systems (cars, airplanes, buses, trains, etc.) -Machine shop experience Preferred Experience: -Experience working on large semiconductor equipment (CVD, PVD, etching, etc.) is a plus -Forklift certification is a plus About Sigray Sigray is a rapidly growing business based in Benicia, CA, that manufactures X-ray sources, optics, and systems. The X-ray systems include X-ray spectroscopy, microfluorescence, and nano- and micro-computed tomography, as well as several unreleased instruments under active development. Sigray’s products are shipped worldwide to the leading laboratories worldwide at universities and corporations for research purposes. The company's culture is dynamic and R&D focused. This is an excellent opportunity to work in a rapidly growing, dynamic company under the guidance and mentorship of leading experts in the X-ray instrumentation field. Job Type: Full-time Benefits: -401(k) -Dental insurance -Health insurance -Paid time off -Vision insurance Work Location: In person

We are Winbro. We are at the heart of the green hydrogen revolution enabling production of next generation fuel cells with our ultra fast laser drilling and welding technologies. Our technology is capable of producing highly complex micro parts to micron level accuracies, creating a revolution in personalised drug delivery and medical care. Our equipment is capable of producing highly complex semiconductor parts, enabling next level efficiencies in electronics manufacturing. JOIN US as a Machine Operator at our Rock Hill facility and we can offer you an opportunity to work in a high-tech, specialist company working with some of the best global names in aerospace, medical, semiconductor and clean energy. Becoming a Machine Operator allows you to experience both the joy of working with your hands and the excitement of using our cutting-edge technologies. You get the benefit of seeing a physical representation of your effort in the components you help create. We hire for attitude over experience as we love to train great people and offer them a real opportunity to learn, develop and progress – in fact many of our senior colleagues started as Machine Operators. If you’re successful, you will work 12-hour shifts, 13-14 days over a 4-week rotation on day shift. Due to this pattern, you get 7 days straight off once a month – this is in addition to vacation and PTO. We offer a climate controlled and clean environment for a comfortable working day. We treat our colleagues with respect and understanding and are regularly told by colleagues that we provide a great place to work with great people. Your day-to-day would involve: Operating multi-axis CNC machine tools. Inspection of completed operations using CMM's, optical vision systems, and manual gauges & tooling. Changing consumables such as electrodes and tooling. Complete daily preventive maintenance checks. Assist in the development of new product introduction programs. Requirements If you are a US Citizen or existing Green Card holder, a high school graduate or have a GED and have basic computer literacy and an ability to meet minimum OSHA lifting guidelines, please apply today. Benefits We offer competitive wages and a benefits package that is unsurpassed in this geographic area, including: 100% company paid health insurance plan monthly premium for the employee, dental and vision plans. Matching 401K plan. 9 paid holidays, 5 paid personal days, and a very generous paid vacation time. $16.00 starting pay

Laser Techniques Company is involved in the design, development and manufacture of precision, laser-based measurement and inspection systems for a worldwide client base. Our products and systems are used in a wide variety of applications including the Energy, Defense and Aerospace industries. Please visit our website at www.laser-ndt.com for more information about our business, technology and client base. Position Description: LTC is seeking an experienced Manual Machinist to join our dynamic team. The ideal candidate will have a strong background in machining and be proficient in operating manual and CNC machining equipment. This role requires an independent Machinist with great attention to detail and the ability to set up, maintain, and operate machinery. This role will be responsible for producing and reworking high-quality parts which meet strict tolerance specifications. This role will also be vital in developing the LTC machine shop into a fully functioning production shop to increase our manufacturing capability and efficiency. Responsibilities to include: • Operate manual and CNC machines to produce low-volume production parts, making real-time adjustments for optimal performance. • Utilize a manual Lathe and Mill to modify non-compliant components. • Collaborate with Engineering and Production teams to support production builds, including reworking parts and troubleshooting assembly challenges. • Perform routine and preventive maintenance tasks on machines, including cleaning, lubrication, and tool changes. • Perform troubleshooting on machine issues. • Specify new equipment and tooling. • Specify and develop fixturing for machining precision parts with moderate complexity. Requirements: • 5+ years of experience operating manual machines in a manufacturing or R&D environment. • Experience with operating multi-axis CNC machines (mills and lathes) is a plus. • Strong understanding of machining procedures, materials, and measurement tools (calipers, micrometers, etc.) • Good understanding of G-code and hand-editing code at the machine. • Strict adherence to health and safety regulations and quality standards. • Ability to read and interpret engineering drawings, schematics, and manuals. • Strong Mathematical Skills • Analytical skills • Attention to detail • Teamwork and communication skills • Ability to lift up to 50 lbs. • High school diploma or equivalent; technical degree is a plus • Familiarity with SolidWorks for interpreting designs is preferred. Please send a qualified cover letter and resume via CL mail relay. No agencies please. Any resumes submitted by agencies will be considered the property of LTC.

SUMMARY: Receives raw materials from railroad cars and delivers material in proper mixtures to hoppers in the storage area. Regrinds faulty product for re-use as raw materials. Ensures proper mixture of new and reground material. Essential duties and responsibilities include the following: • Achieves daily quota for production. • Cleans surfaces and machines located in the Raw Materials Department. • Transfers raw materials from transportation containers through mechanical receiving systems to hoppers, blenders or tumblers. Mixes, by formula, additional raw materials including pigments, reground material and chemical agents to achieve and transfer appropriate blended material for use in injection molding machines. • Writes hopper labels describing the weight of the material and the weight of pigment contained in the material. • Operates the regrind machine to grind rejected products into raw material and operates the metal detector on the material to ensure it is clean and ready for reuse. • Reads production schedule to determine amounts of virgin and reground material that is needed to meet the production plan. • Performs minor maintenance on machines. Requirements Previous manufacturing experience preferred. Effectively communicate in both written and oral forms. Read and comprehend instructions, short correspondence and memos. Write simple correspondence. Effectively present information in one-on-one and small group situations to other employees of the organization. Calculate amounts in percentages and fractions, including multiplication and division of fractions. Apply concepts of basic algebra. Basic knowledge of the metric system. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.   Heavy work: Activities will involve frequent standing and walking, and communicating verbally and in writing.  Exerting up to 50 pounds of force occasionally, up to 25 pounds of force frequently, and up to 10 pounds of force constantly to move objects.  Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.  Correct visual acuity to 20/20.  Physical ability to move body quickly in order to avoid moving mechanical parts and/or heavy machinery. Benefits 2nd shift 18.40 3rd shift 18.80 Earn a .25 cent increase after working 30 days with perfect attendance   Earn a 25.00 bonus after working first 80 hours.   This is biweekly pay.   EOE #IND456

Eastridge Workforce Solutions is now hiring Manufacturing Tech roles in Carlsbad area. Location: Carlsbad Shifts: 1st 6am - 230pm 2nd 2pm - 1030pm 3rd 10pm - 630am Pay: starting at $18/hour **MUST HAVE 6 MONTHS OF MANUFACTURING EXPERIENCE *Please simply respond to this advertisement with your resume and the desired shift you would like to work *I will then reach out to set up a time to chat In this job, you'll learn how to: - Assemble cartridges and reagent kit components - Operate manufacturing line equipment - Adhere to manufacturing schedules - Submit finished documentation for quality release For this job, you'll need **MUST HAVE 6 MONTHS OF MANUFACTURING EXPERIENCE - A high school diploma - A current resume - Ability to pass a basic online assessment for color blindness and basic math - Ability to pass a drug screen and background evaluation RESERVE A SPOT! These positions will fill quickly! *Please simply respond to this advertisement with your resume and the desired shift you would like to work *I will then reach out to set up a time to chat Eastridge Workforce Solutions is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We celebrate diversity and are committed to creating an inclusive environment for all employees. Please note that Eastridge is unable to provide visa sponsorship to applicants.

The InProduction team has spent the better part of the last decade combining the best seating and staging companies into a one-stop shop for most of what is needed to produce an event. Starting with SGA Production Services, we added and integrated T&B Equipment, CommuniLux Productions, Nussli U.S., and Seating Solutions to become today’s InProduction. These acquisitions have allowed InProduction to evolve into the largest provider of temporary seating, staging, structures, and scenic production for the United States events industry. The Company is backed by ZMC. ZMC is a leading private equity firm comprised of experienced investors and executives who invest in, and manage, a diverse group of media and communications enterprises. Founded in 2001, ZMC’s investment philosophy centers on operational value creation driven by targeted investment themes, deep sector expertise, and strong partnerships with industry and operating executives. ZMC approaches its investments in collaboration with management teams and has a successful track record of actively adding value to portfolio companies. Come join us! Check out our web page https://www.inproduction.com/ As a Professional Sports Scaffolding Laborer at InProduction, here is what you can expect: Daily Routine of scaffolding structures at some fascinating professional venues like football and soccer stadiums, baseball fields, tennis courts, golf courses, hockey rinks, and racetracks for example. You can expect to see much of the work we completed while watching a game or event on tv. Crews which you will be assigned to will be no more than 5 employees and will travel from job to job together as a crew. Full Time, Consistent and Year-Round Work without having to wonder when or if the next assignment is coming. Work Environment is generally outdoors so you will be in the sun and fresh air while building. Overnight Travel will be the routine and you can be away from home for 90+ days at a time. Travel Accommodations and hotel lodging will be arranged and provided by InProduction. We stay two crew members to a room. Hotel rooms will usually have small kitchens so you can prepare meals. Benefits are available to you and your eligible family members such as medical insurance, dental insurance, vision insurance. When eligible you will have paid vacation, paid holidays, and great opportunity for weekly overtime.· Growth and Opportunity to grow your construction skills which may provide an opportunity to become a Crew Lead, a Foreman, Project Manager, or wherever else it leads you. Additional Duties and Responsibilities: Build and breakdown scaffolds, install ladders, walkways and handrails Assist in the safe and efficient installation/removal of equipment in accordance with project specific plans and layouts Inspecting all scaffold components prior to assembly Clean and prepare construction sites, including removing debris and materials Load and unload equipment and materials form truck and vehicles Study plans and equipment lists prior to on-site installation Ensure appropriate safety measures are followed; including wearing and use of safety equipment Maintain fall protection requirements while erecting / dismantling scaffolds Make sure that tools and equipment are cleaned and maintained properly at the end of each shift Ensure full client satisfaction in relation to the quality of service and finished product within planned time schedules Other duties as required Compensation: $18 and above. Requirements Background Check and Drug screening required Valid driver's license preferred, with good driving record. Familiar with basic hand tools, drills, saws, hammers, etc. Cannot be afraid of heights Creative problem solver with the ability to handle multiple tasks simultaneously Ability to work both independently and within a team setting to achieve company goals Able to lift-up to 75Ibs Candidate should be able read and understand basic safety instructions Candidates from a Scaffolding, Carpentry, Construction, Laboring or Events background are preferred. Must be capable of working overtime Preferred but not required: Bi-lingual (English/ Spanish) Benefits Medical, Dental, and Vision Insurance 401K Match 100% company paid Basic Life and AD&D Insurance Voluntary supplemental benefits Paid Holidays Paid Vacation Paid Sick Daily Per-Diem