Assemblers/Light Machine Operators -- Mon-Fri Day Shift, $17/hr (West Brighton)

This is for a light manufacturing position. Responsibilities include: Sewing the filters (on a stand up chain stitch sewing machine), cutting filter pads, pre-assemble air filters, and also working in the warehouse. Warehouse duties include helping loading and unloading trucks, pulling orders, etc. You may be asked to do other duties outside these listed. You should have a responsible and positive attitude. Requires walking, standing, and working on your feet. Previous experience not required. This job is full or part time. Part-timers - perfect for a few hours a day! 401K, healthcare, vacation (if full-time) Send in your resume but you will need to fill out an application in person. Call or stop in to interview and fill out an application, M-F 8am-5pm.

Resource Management Concepts, Inc. (RMC) provides high-quality, professional services to government and commercial sectors. Our mission is to deliver exceptional management and technology solutions supporting the protection and preservation of the people and environment of the United States of America. RMC is hiring for a Junior Inventory Management Specialist to support our customer onsite at NSWC Indian Head, MD.   The selected candidate will be expected to: Perform a wide range of substantive clerical/technical support work. Perform inventory accounting and control records entry and review, demand processing, requisition and re-supply, receipt and release of property, shipments, and management information recoverability. Perform periodic inventories of plant property, materials, and equipment. Gather information to support inventory records, discrepancies, and assist with corrective actions. Process disposal documentation as required, and post status record changes to maintain control of equipment dispositions. Process material receipts; enter data in the inventory control system; enter receiving and shipping documentation; and notify management of discrepancies with maximum supervision. Follow technical written procedures issued by the Federal Government for requisitioning, receiving, and storing supplies, repair parts, and equipment. Requirements A High School Diploma and (2-3) years of general work experience is required. An active DoD Secret clearance is required to start. The applicant selected may be subject to a security investigation and must meet eligibility requirements for access to classified information. Must have working knowledge of Microsoft Office Suite. Must be able to follow technical written procedures issued by the Federal Government. Must maintain a valid state-issued driver's license and be able to drive and operate a vehicle (car, truck, van). Must be able to lift up to 50 lbs. Benefits At RMC, we're committed to your career growth! RMC differentiates itself from other firms through its investment in our employees. We invest our resources to train, certify, educate, and build our employees. RMC can offer you a great place to work with a small company feel and give you the experience, tuition assistance, and certifications that will take your career to the next level. This also includes a competitive paid vacation package with 11 paid federal holidays. Additionally, we also offer high-quality, low-deductible healthcare plans, pet insurance, and a competitive 401K package. Salary at RMC is determined by various factors, including but not limited to location, a candidate's specific combination of education, knowledge, skills, competencies, and experience, as well as contract-specific requirements. The current salary range for this position will be $41,000 to $48,000 (annually). #LI-MB1

Reports To: President/Owner FLSA Status: Tier 2/ Full Time/ Exempt Location: In-Person, Oakley ID, Southern Idaho (Burley / Twin Falls Region). Some travel required. About Us Scrivanich Natural Stone is a growing natural stone quarrying and processing business located in Southern Idaho, Utah, and Washington, with ownership headquarters in Washington State. Our company produces high-quality landscape, building stone, and thin veneer products for regional and national markets. With steady annual revenues and a strong foundation, we are positioned for significant growth and are seeking a proven leader to help us achieve that growth and sharpen our operations. The Opportunity We are hiring a General Manager to take day-to-day responsibility for sales growth, marketing, operations, and team leadership. This person will be a strategic thinker and business builder who can grow revenue through effective sales and marketing initiatives while ensuring efficient and safe quarry operations. The GM will report directly to ownership and will play a key role in setting the company’s strategic direction. Key Responsibilities Sales & Marketing (Primary Focus) Drive revenue growth through direct sales, distribution channels, and strategic partnerships. Develop and execute marketing plans to expand brand recognition and market penetration. Build and maintain strong relationships with dealers, distributors, architects, builders, and contractors. Negotiate major sales contracts and pricing strategies. Strategic Leadership Work with ownership to define and execute business growth strategies. Identify new product opportunities, geographic markets, and customer segments. Monitor industry trends and competitive activity; adjust strategy as needed. Operations Management Oversee quarry and plant production, including equipment, safety, and compliance. Manage and develop staff across quarrying, processing, administrative, and logistics functions. This includes obtaining and managing a team of >70 H2B visa seasonal employees across several quarry locations. Ensure operational efficiency, cost control, and high product quality. Lead a culture of safety, accountability, and continuous improvement. Financial & Administrative Develop and manage budgets, forecasting, cash flow, payroll, and P&L accountability. Maintain company records confidentially, accurately, and securely. Reduce company risk by building competitive and comprehensive insurance and risk management plans. Track performance metrics and report results to ownership. Support HR needs including hiring, training, and performance management. Public Relations, Contracts, Mining Rights, and Permitting Act as the company liaison for safety, regulatory, and permitting requirements, such as those enforced by the BLM and MSHA. Develop leases and contracts for land and quarry claims, and build and maintain relationships with stakeholders. Qualifications Bachelor’s degree in Business Management, or related field (MBA a plus). 3–5+ years of management experience, ideally in building materials, quarrying, aggregates, or related industrial sectors. Proven success in sales and marketing leadership with measurable revenue growth results. Strong strategic thinking, analystical, computer, and business development skills. Ability to balance big-picture vision with hands-on operational oversight. Excellent communication, negotiation, and leadership skills. Comfortable in an entrepreneurial environment where initiative and adaptability are essential. Compensation & Benefits Base Salary: $110,000 and up, depending on qualifications. Performance Bonus Eligibility: Tied to revenue growth, profitability, and strategic goals. Benefits package 122 hours PTO (pro-rated according to start date) Medical, Dental, Vision insurance 401-k 2:1 matching, up to 2% of pay Why Join Scrivanich? This is a rare opportunity to step into a key leadership role in a growing company with strong market potential. The right candidate will have the ability to make a significant impact, shape the company’s direction, and share in its long-term success.

Shifts:  1st - Monday through Friday 7 am to 3 pm   What We Offer Competitive Pay: Starting at $20.91/hour. Bonus: $1,500 sign on bonus. Profit Sharing: Quarterly profit-sharing with no cap. Comprehensive Benefits: Health, dental, and vision insurance starting day one, with HSA contributions included. Perks: On-site gym, nurse, and barbershop. Career Growth: Opportunities for training, career development, and tuition assistance. Paid Parental Leave: Available for all regular full-time employees. We are proud to be an equal opportunity employer and strongly encourage veterans to apply. Your unique skills, experiences, and dedication are highly valued and align with our mission to foster a diverse and inclusive workplace Responsibilities: Perform all duties in a safe manner Ability to work in a team environment focusing on meeting Safety, Quality, Delivery and Cost standards Capable of working any shift with possibility of rotating Know, understand, and follow plant safety rules, policies and procedures Follow all set-up and operational procedures to ensure accuracy and quality Run entry-level equipment and ensure all processes are completed per standard operating procedures Perform duties on the production line including product transfer, parts assembly and quality inspections Ensure inventory accuracy and tracking procedures are followed Follow company policies and procedures Assist others as needed Maintain a clean work area Complete paperwork as required Other duties as assigned by lead or supervisor Requirements Desired Experience:  Possess good problem solving and troubleshooting skills and safety practices Possess a high level of initiative and personal accountability Ability to measure, read, write and document work Ability to sustain a steady work pace over an entire work day Strong basic math & reading skills Comfortable performing a wide range of responsibilities, from thinking broadly to executing detailed tasks Proven ability to effectively work in a detailed, fact based environment Commitment to personal integrity and integrity of the product(s) and processes Customer focused with the ability to function with a high sense of urgency Benefits Named to Fortune’s 100 Best Companies to Work for in America list four times, and with a people first philosophy rooted in The Golden Rule (treating others the way we would want to be treated), our company provides a safe and rewarding work environment. We have a team-oriented culture and believe employees are essential to the company's success. In addition to a competitive benefits package, we offer the ability for individuals to grow within our organization through training, development and advancement opportunities. Company Perks: Comprehensive benefits with low premiums starting day one 401k with company match Paid vacation and holidays Company profit sharing Onsite barbershop / hair salon and fitness center Great team and team dynamics Hesitant to apply because you may not meet every specific requirement? If this role is something you are interested in, but your previous experience doesn’t exactly align, we encourage you to apply! At our company we are dedicated to building a diverse and inclusive workplace. We recognize that individuals with diverse experiences and backgrounds are essential to our success. You may be the perfect candidate for this role or others within our organization. Our company is a designer and manufacturer of market-leading brands that help enable people to live safer, healthier, and more expressive lives. We operate with three segments: Building Products, Consumer Products and Sustainable Energy Solutions. Our emphasis on innovation and transformation extends to building products including water systems, heating and cooling solutions, architectural and acoustical grid ceilings and metal framing and accessories, and consumer products in tools, outdoor living and celebrations categories sold under brand names Coleman®, Bernzomatic®, Balloon Time®, Level5 Tools®, Mag Torch®, Well-X-Trol®, General®, Garden-Weasel®, Pactool International® and Hawkeye™. We also serve the growing global hydrogen ecosystem through on-board fueling systems and gas containment solutions. We are value-added partner to customers, featuring a wide variety of highly engineered products across Tools, Outdoor Living, and Celebrations. At our Chilton, WI facility we produce handheld torches and propane tanks which are essential for camping adventure and DYI’s.  Our company, and its subsidiaries, is an equal employment opportunity employer. Qualified applicants are considered regardless of race, color, religion, age, national origin, sex, disability or veteran’s status. Please contact Matt at mgeorge@fmi.vet for more information.

Triosurfaces is looking for qualified experienced CNC SAW Operator to join out team. Trio Surfaces is a Seattle-area company specializing in the fabrication and installation of high-quality custom countertops, shower surrounds, fireplaces, and other surface projects using materials like quartz, granite, marble, and porcelain. Founded by three individuals with extensive experience, the company focuses on precision, craftsmanship, and customer communication, utilizing advanced technology to ensure detailed and beautiful finished surfaces. We are also looking for qualified and experienced installers and helpers. $25-50 Must speak English

Summary The Production Technician is responsible for assembling, calibrating, and testing our products, as well as performing measurement services related to our products.  This full-time, hourly role involves hands-on assembly and testing of precision products, as well as performing repair services in a controlled lab environment. The ideal candidate will bring a strong work ethic, a collaborative mindset, and a willingness to learn technical concepts related to optics, photometry, and metrology. Essential Duties & Responsibilities Perform manual assembly and repair of components according to detailed work instructions, drawings, and specifications. Conduct visual and dimensional inspections using imaging software and other precision tools. Operate and maintain lab instruments and equipment. Maintain accurate production records, including workflow documentation and quality logs. Collaborate with engineering and quality teams to identify and resolve assembly issues. Follow all safety, quality, and cleanroom procedures, including gowning protocols and material handling guidelines. Participate in continuous improvement initiatives and cross-functional training. Requirements High school diploma or GED; A.S. Electronics, technical training or certification is preferred. 6-12 months experience in cleanroom assembly, manufacturing, or technical environment; familiar with ESD protocols and procedures. Basic understanding of electronics, electronic assembly and schematic interpretation. Proficiency with Microsoft Office applications (Word, Excel, Outlook, Access). Strong critical thinking skills with the ability to perform basic troubleshooting and data collection to aid in root cause analyses. Demonstrated ability to multi-task without compromising quality or attention to detail. Effective verbal and written communication skills. Proven ability to adapt to shifting priorities and evolving product requirements to maintain productivity and quality. This job description shows the general scope of responsibilities for the position.  Additional responsibilities can be added or deleted on an on-going basis.  A job description does not constitute an employment contract.  Compensation Range | $24.00 to $26.00 per hour  This position is eligible for experience specific compensation ranges based on candidate experience, compensation will be aligned and determined based on this criteria. Fluctuations in the job market may necessitate adjustments to pay ranges. Final pay determinations will depend on various factors, including, but not limited to experience levels, knowledge, skills, and abilities.    Radiant Vision Systems is an equal opportunity and affirmative action employer. We consider all qualified applicants for employment without regard to race, color, religion, creed, national origin, sex, pregnancy, age, sexual orientation, transgender status, gender identity, disability, alienage or citizenship status, marital status or partnership status, genetic information, veteran status or any other characteristic protected under applicable law. About Radiant Vision Systems Radiant Vision Systems works with world-class brands and manufacturers to deliver creative visual inspection solutions that improve quality, reduce costs, and increase customer satisfaction. Radiant’s legacy of technology innovation in photometric imaging and worldwide install base date back more than 30 years and address applications from consumer electronics to automotive manufacturing. Radiant Vision Systems product lines include TrueTest™ automated visual inspection software for quality control, and ProMetric® Imaging Colorimeters and Photometers, machine vision solutions, and goniometric systems.  Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Family Leave (Maternity, Paternity) Short Term & Long Term Disability Training & Development Free Food & Snacks Wellness Resources