NOW HIRING!!! IMMEDIATE NEEDS!!!! NOW HIRING!!! (Vernon)

Commercial Building Construction & Service – Start Immediately! SKILLS REQUIRED: • 5+ years of Carpentry and Installation • 5+ years of general construction experience, including finish carpentry • Understand the dynamics of a Building’s plumbing: electrical and HVAC systems • Determine the appropriate materials and supplies necessary for each step of the job and generate accurate lists of everything that is required • Ensure on-site Subcontractors are performing within scope of work • Physical ability to climb on roofs, into confined spaces and carry 50 -75 lbs. • Ability to work independently • Maintain accurate records of time and materials for each job. • Must own General Tools • Professional appearance/demeanor and positive attitude • Clean driving record/background check and drug free • Provide exceptional customer service Full or Part Time year-round work. Please respond with your resume, qualifications and contact information.

Construction laborer's needed. POSITIONS AVAILABLE IN THE FOLLOWING AREAS: Concrete, rebar, masonry, carpenters, operator, drilling, grading, framing, shotcrete, handyman, maintenance and labor These position start immediately after successful passing the application/screening process. Must have 1 year minimum of construction experience and some tools with reliable transportation. Expected duties: Assist in building structures for residential sites Demolitions Flat saw asphalt and concrete Mix Concrete Pump Concrete, grout, cement, sand or plaster Expected to work on scaffolds, lifts and ladders Expected to load, push and unload wheelbarrow Will be using jackhammers, shovels, skillsaw among other tools Must be able to lift 50 lbs plus Must have reliable transportation Required Experience Skilled labor 1 year construction 1 year Apply in person: Wednesdays and Thursdays 8:30am-2pm by appointment only at 727 N. Vernon Ave Azusa, CA 91702 Various job sites located in: Santa Monica, Bel-Air, Newport, Los Angeles, Manhattan Beach, PCH, Malibu and Beverly Hills.

Now Hiring Siding, Roofing & Gutter Installers! If you are looking for a steady workflow with weekly pay for your company, then look no further. DaBella is urgently hiring Siding, Roofing, Gutter, & Bath Installation Companies for ST. GEORGE and surrounding areas! With 55+ locations, DaBella is currently one of the fastest-growing Home Improvement Companies in the United States. Our skilled siding installers have the potential to make $500,000+ per year! Why Work with Us? -Steady Work: Consistent residential installation projects. -Weekly Pay: Receive pay every week for completed jobs. -High Earning Potential: Our skilled installers can make $500,000+/year -Help and Support: We provide troubleshooting assistance and strong customer service support -All Projects Are Presold: We handle the sale so you can focus on the installation Required Qualifications: -UT Registered/Active LLC or Corporation -Your own Installation Equipment & Vehicle(s) -Your own Crew(s) -An Articulate & Professional Demeanor -Ability to Meet DaBella’s Insurance Requirements -Outstanding Customer Service Skills -Ability to abide by OSHA safety standards -Utah Contractor's License -Pre-78/LEAD Certified if doing Siding (Preferred) -Experience in Construction and(or) Home Improvement Apply Today to start your journey to grow your business! For more details on DaBella, visit our website at: https://dabella.us/contractors/ APPLY HERE: https://dabella.us/contractors/ #homeimprovement #contractor #subcontractor #renovation #renovator #exteriors #remodeling #work #contracting #Builders #construction #Vinyl #jobopportunity #residential #skilledlabor #repairs #Hardie # #soffit #installation #fascia #shake #LP #shingles #tando #flahing #batten #Roofing #Gutters #seamlessgutters #eaves #asphalt #shingles #work

Job Description We are seeking a skilled Machinist to set up and operate CNC machining centers, as well as manual lathe and milling centers. The ideal candidate will adjust tool and fixture offsets to achieve documented material tolerances, interpret work instructions and product/component drawings, and use precision measuring equipment to ensure parts meet engineering specifications. Responsibilities Set up and operate CNC machining centers and manual lathe and milling centers. Adjust tool and fixture offsets to achieve required material tolerances. Read and interpret work instructions and product/component drawings. Follow work order instructions and accurately record task times. Use precision measuring equipment to check parts in accordance with engineering documents. Maintain a clean and serviced work area and machines. Perform other duties as assigned. Additional Skills & Qualifications 2-5 years machining experience in moderate to high volume production environments. Experience in setting up, operating, and adjusting both manual and CNC lathe machining. Ability to inspect parts using micrometers, gage pins, thread gages, digital/analog indicators, surface plates, calipers, and other tools. Ability to read and comprehend production Bill of Materials and production orders. Team player, professional, driven to first-time accuracy, and able to work under pressure. Work Environment This position requires working the 3rd shift OR the 1st shift. The work environment includes the use of advanced CNC machining technology and requires adherence to safety and cleanliness standards. Job Type & Location This is a position based out of San Leandro, California. Pay and Benefits The pay range for this position is $27.00 - $32.00/hr.

Please apply at: https://secure7.saashr.com/ta/6206871.careers?CareersSearch=&lang=en-US Summary: Leads Injection Molding and Automation (IM&A) team members on required tasks, work orders, and daily 5S upkeep with all IM&A processes.  Performs and trains team on machine set-up, in-process production quality inspections, machine tear down, troubleshooting, maintenance, and workflow. DUTIES and RESPONSIBILITIES •           Directs production Work Order execution with prioritization from Production Manager, coordinates supporting equipment setup and line clearance operations, and team activities for equipment preventative maintenance. •           Participates in Production Planning meetings to provide Work Order execution status and scheduling updates. •           Participates hands-on in IM&A activities including work order execution, process equipment setup and shut down operations, mold/material/tooling changes, troubleshooting, equipment maintenance, and required quality assurance activities. •           Sustains on-going training and development of IM&A team members on all injection molding and machine automation processes, along with required quality assurance inspections to confirm production parts meet LEMO quality standards and dimensional requirements per drawings. •           Monitors processes at start up, production, and shut down to ensure the proper operation of injection molding and over-molding machines, automated pin insertion machines, and other IM&A work area process equipment. •           Collaborates with Engineering and Quality to investigate root causes of molding and secondary operation issues; helps with implementing corrective actions and process control plans. •           Provides input and participates in continuous improvement projects on cycle time reduction, process and machine up-time improvements, and scrap/waste reduction •           Follows all policies and work rules including but not limited to safety, 5S (housekeeping), Lean Manufacturing practices and quality systems •           Assists with new mold samples, verifies that process parameters are set per the process qualification documentation, collects and provides requested documentation of results. •           Other duties as assigned See job posting for more specific details and job qualifications. Company Overview: LEMO is a privately owned Swiss company, located in Sonoma County among the rolling hills of Northern California's wine county, centrally located just 45 minutes north of San Francisco. LEMO is a global leader in the design and manufacture of precision custom connection solutions since 1946. Providing high-quality push-pull connectors that can be found in a variety of challenging application environments including medical, industrial control, test and measurement, broadcast/audio/video, and telecommunications. LEMO also provides cable assembly services, prototyping and custom designs. LEMO requires an uncompromising commitment to QUALITY, EXCELLENCE, and INNOVATION. As such, we encourage and invest in each employee to promote responsibility, personal growth, and integrity. LEMO is an Equal Opportunity Employer

Kitchen Manager - Future Bars Click here to APPLY for the Kitchen Manager position Future Bars Group is the largest craft cocktail and bar group in San Francisco. We have a strong hospitality focus: an immersive environment, craft cocktails made with the best ingredients, and unparalleled customer service. Our award-winning bars include: Pagan Idol, Rickhouse, Bourbon and Branch, and Local Edition. Our commissary kitchen produces and distributes the ingredients (syrups, tinctures, bitters, prepared foods, etc.) used in our cocktails at all our bars. If you’re someone who is excited by food manufacturing, then this may be a great opportunity for you. We’re looking for a production manager to head our commissary kitchen production facility. You will be responsible for the quality of production, the supply logistics, the management of staff, operations, and managing financial resources. We’re fastidious about what we put into our cocktails; we invite you to apply if you share the same passion. Responsibilities: • Supervise and mentor hourly production employees • Evaluate and refine manufacturing processes to ensure maximum efficiency and quality control • Oversee and manage distribution logistics • Liaise with the heads of 13+ bars • Inspect products prior to shipment • Enforce and refine safety procedures • Create and oversee good manufacturing processes (GMPs), and employee training • Manage, create, and enforce employee schedules • Generate purchasing and sales reports for accounting • Maintain kitchen equipment, and independently contact service experts as needed Qualifications: • 1-2 years of kitchen or manufacturing experience required • 1+ years of experience managing a team • Bachelor’s degree with an operations focus, or kitchen/manufacturing leadership experience • Heavy lifting (up to 50 lbs.) and standing for long periods of time • Excel and Google Docs experience required • ServSafe Food Protection Manager Certification required (can be obtained after starting) • Must have strong interpersonal skills • Spanish and English fluency preferred • Excellent verbal and written communication skills required • Demonstrate attention to detail Benefits: • Annual compensation $62000-$79000, hourly compensation starting at $30-38/hr • Company-sponsored medical with optional dental/vision • Matching 401(k) is offered to qualifying employees • Commuter check benefit Resumes without a cover letter stating why you’re interested and why you might be a good member of our team will not be considered. We look forward to hearing from you! Future Bars is an at-will, equal opportunity employer. Future Bars considers applicants for all positions without regard to race, color, creed, religion, national origin, place of birth, ancestry, sex, age, disability, genetic information, veteran status, gender identity, sexual orientation, HIV/AIDS status, weight, height, marital status, or any other legally protected status under local, state, or federal law. Click here to APPLY for the Kitchen Manager position