Quality Inspector (Port Huron)

Purpose – This Document will identify the job that the Packer will perform, and it will outline the correct methods of operation that will ensure safety of the worker and others, while preserving the machine integrity and the product quality and traceability.  Scope – The packer is responsible for checking each packaged unit and packing it into the corresponding carton. The packer ensures only sealed, sound products (bags, jars, sachets) without leaks are packed into the cartons. The following is a list of responsibilities and expectations assigned to the position. Please see the supervisor for any questions. Personal hygiene and safety are paramount when handling food products and / or packaging. The packer is responsible for always following all the sanitation guidelines and the GMPs during the workday; this includes but it is not limited to wearing a clean uniform t-shirt, long pants and closed shoes, washing and sanitizing hands periodically, not wearing any jewelry, wearing hairnet and/or beard net as applicable in the designated areas, and not eating or drinking outside of designated areas.  The packer is responsible for following the Safety guidelines and for working diligently to help prevent any accident in the facility, and to prevent damage to the product and the equipment. Requirements Responsibility At the start of the shift, bring enough packaging materials to the work area, ensure there are cases, and labels or any other applicable material needed for the product being packaged. Before starting any production, wait for the verification from the QA specialist that the packaging materials are correct. Without the QA specialist confirmation, or in their absence the confirmation from Manager, the production and packing of any products is not allowed to commence. Check with the Quality Specialist the Julian Date for the production day. Check all the units for the code date, make sure it is visible, complete, legible and in the right spot. Check all the units for leaks by squeezing them and checking the seals and the corners for any potential leaks. Discard any leaking units into the reject bin for rework. If there are any discrepancies identified when comparing to the specifications, set the product in the reject bin for rework. If the incident is not isolated, notify the Operator and the Quality Specialist immediately so the machine can be stopped, the cause for the problem identified and corrected, before continuing production. If the quality of the packaged unit is questionable, consult with the Quality Specialist before packing or rejecting the product. Assemble the cases per the instructions. When applicable, label the cases. Pack the good, packaged units into the cartons, according to the specifications. Ensure the correct number of units is packed in each case. Stay in permanent communication with the operator, resolve any issues timely, and make sure the line is always running at the maximum allowed speed according to the product being packaged. Maintain the area clean throughout the day. Pick up any sugar spills promptly. During film / pouch changes or at any downtime, take care of the regular sanitation activities of the area. At the end of the shift, clean the area and leave it ready for the next shift, sweep and clean all the area. Completes other warehouse production duties as needed. Basic computer skills Work well with others to meet team goals and adjusting to important change Ability to lift 50 lbs. Frequent movements including walking, standing, bending/stooping, urning, twisting, pushing, pulling, raising arms, lifting, climbing and other active movements. Working across temperature zones that may include cold and/or hot environments or extended periods and may include work in environments where dust is present. Should the situation arise, complete any additional task assigned by the Supervisor or by the Manager. Packers from other lines are responsible for covering responsibilities of the position in case of the absence of the primary person.  Packers, Palletizers and Operators are all cross-trained and can fill in this position in case of absences. $15.00 per hour. Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Family Leave (Maternity, Paternity) Short Term & Long Term Disability Training & Development

TOOL DESIGNER We are a custom tool and die, family run manufacturer, been in business since 1965, we are the largest and best at making our niche product that we ship all over the world. A degree in mechanical engineering is to much, but some college is a plus, we use Solid Works & AutoCad, so you must have experience using those programs. Mechanical experience is a plus. We have spared no expense in providing the best tools for our people, a few still work here after 40 years on the job. We have a very good benefits program including, health, dental, disability, life insurance, 401K with match, and profit sharing. Hours are Monday to Friday 6 to 2:30. We are located 2 miles South of downtown off Broadway. EOE / AAE send resume and email, all applicants will be considered.

STEEL/METALS COMPANY WAREHOUSE WORK, DRIVER CDL CLASS B PREFERRED, NEEDS ENERGETIC, ENTHUSIASTIC, CANDIDATES, WILLING TO WORK AND TO BE TRAINED ON VARIOUS PROCESSING EQUIPMENT OVERHEAD CRANES, FORKLIFTS, METAL WORKING, MULTI-TORCH HEAD CNC BURNING MACHINES WITH PLASMA TORCH, SHIPPING / RECEIVING, IMPORT ,EXPORT, Health Insurance, Vision Coverage, 401K/IRA Savings Match, Paid Vacation, Start at $30,000.00+ Monday through Friday 8:00 AM to 5:00 PM regular hours over-time pay over 40 hours Equal Opportunity employer EOE Drug Free Work Place DFWP Please submit your resume with contact information. Requirements CDL Class B a plus Benefits Health Insurance, Vision, 401K/IRA Savings Match, Paid Vacation, M-F 8:00 AM to 5:00 PM regular hours

Vestas Hiring Assembly Technicians at Two Colorado Locations Assembly Technicians—Available Locations Nacelles Factory - Brighton, CO The Nacelles Factory in Brighton proudly manufactures nacelles and hubs for wind turbines in 265,000 square feet of building space. All shifts available ($3 shift differential for night shift) Assemble components utilizing both hand and power tools Operate a bridge crane for loading, stacking, and transportation 1+ years of previous manufacturing experience is required Required previous experience with standard power and hand tools, including a torque wrench Mechanical Aptitude (pneumatic, hydraulic and electrical experience) is required Ability to read and follow written instructions in English High school diploma or GED or equivalent is required Pay: $23.50 - $30/hr (depending on experience) Blades Factory - Windsor, CO The Blades Factory in Windsor produces blades for the new V163-4.5 MW turbine as well as the 2 MW platform in our 666,000 square feet of building space. Engage in manual production processing to fit and assemble components, such as bolts, screws, shafts, or bearings into a complete assembly Load, stack and transport materials by hand, truck, crane or jib 2+ years’ experience of either manufacturing, trade labor, craning, or fabrication experience is required Ability to read and follow written instructions in English High school diploma or general education degree (GED) required Basic system skills-Microsoft office, SAP and Apriso preferred Must pass confined spaces test as required Pay: $23.50 - $28/hr (depending on experience and skill set) Click Here: Apply & Express Interest What Vestas Offers You Healthcare, vision, and dental insurance Retirement plan  Tuition reimbursement  Flexible time off  Paid parental leave  State-of-the-art training programs Click Here: Apply & Express Interest Why Vestas Vestas is the energy industry’s global partner on sustainable energy solutions. We specialize in designing, manufacturing, installing, and servicing wind turbines, both onshore and offshore. Across the globe, we have installed more wind power than our competitors in the renewable energy arena with more than 145 GW of wind power installed worldwide and 40+ years of experience in wind energy, Vestas has an unmatched history demonstrating our expertise within the field. With 29,000 employees globally, Vestas is a diverse team united by a common goal: to power the solution – today, tomorrow, and far into the future.

Recycling Technician 1 Wednesday-Saturday, 5:00 AM to 3:30 PM Base Rate $19.50 + $1.00 Shift Differential   For over 100 years, we’ve been committed to high quality American manufacturing, and we continue to pour that passion into our line of innovative, battle-proven optics products for the world’s most relentless hunters, shooters, law enforcement and military professionals. We design, build and test our best-in-class products with a single-minded focus - to make sure they’ll perform forever. At Leupold and Stevens we’re American to the Core and passionate about what we do. We offer a friendly work environment where innovation, quality, and continuous improvement are our priorities, and where your ideas matter.   Our benefits package is amazing: affordable health and dental insurance a strong commitment to training and professional development including an internal skills development program for all manufacturing team members a generous tuition reimbursement program company contributions up to 8% of base pay into a 401K retirement account profit sharing product discounts What You’ll Be Doing as a Recycling Technician 1: Performs maintenance tasks to sustain the operation of assigned machines, assists Hazardous Materials operations, and maintains clean and orderly manufacturing areas. Skills and Experiences You’ll Need as a Recycling Technician 1: Requires high school education or equivalent. An equivalent combination of education, training and/or experience may be considered. Related work experience in a manufacturing environment is preferred. Requires an initial 24 hours of training in RCRA hazardous waste operations, OSHA and RCRA emergency response training. Ability to understand and apply detailed written and oral instructions, documents, and procedure manuals.  Ability to identify the hazardous materials for the work area, their proper safe usage, and the health hazards of applicable substances. Ability to use a computer. Certified forklift operator, or able to obtain certification. Work Environment for a Recycling Technician 1: Work takes place in a manufacturing environment with exposure to noise and chemicals. Ability to use PPE. Ability to stand or sit for long periods; Good manual dexterity, fine motor skills, visual acuity, and ability to use full range of motion. Ability to lift or move up to 25 pounds with assistance.   For details on positions and to apply, go to: www.leupold.com/careers   Leupold & Stevens, Inc. 14400 NW Greenbrier Parkway Beaverton, Oregon 97006   * A core business objective at Leupold & Stevens is to maintain a workplace in which each employee can achieve their full potential.  The company was founded on the principle of giving customers and our team members ‘A Square Deal’; to us, this means advocating for the employment opportunities and advancements of all individuals regardless of race, color, sex, national origin, age, religion, physical or mental disability, marital status, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. We resolutely believe all aspects and privileges of employment should be determined by skills and behaviors, not personal identities.   * With our commitment to make our application process and workplace accessible for individuals with disabilities, we will provide reasonable accommodations, upon request, for an individual applicant to participate in the job application process.  To request an accommodation to the application process, please send an email to HRDept@Leupold.com or call (503) 646-9171 and a Leupold & Stevens representative will contact you.   * Leupold & Stevens, Inc. is a drug free workplace.  All final candidates must successfully pass a pre-employment drug screen and background check.   * Leupold & Stevens, Inc. complies with all applicable FAR & DFAR regulations.   * We hire U.S. citizens and persons lawfully authorized to work in the U.S. All new employees must complete an INS Employment Eligibility Verification Form (I-9). Positions may require a deemed export control license for compliance with applicable laws and regulations. Placement is contingent on Leupold & Stevens, Inc.’s ability to apply for and obtain an export control license on your behalf.

Experienced in welding, fabricating, rebuilding of new and used trailers and shipping containers.. A separate person normally does the painting after finishing. A good spray painting position also open. Working with us at a very nice-ranch east of Sacramento. Some tools required. Start ASAP, call or text for a quick mini interview.