Browse
···
Log in / Register

Class A CDL –Chip Trucks Swing Shift – Eugene (Eugene)

$100,000/year

29166 Fox Hollow Rd, Eugene, OR 97405, USA

Favourites
Share

Description

Walsh Trucking is a family owned company operating since 1959. We provide high quality service to wood residual and solid waste customers throughout the Northwest. Our success has allowed us to grow as a known leader in the wood residual and refuse transportation industry. We also offer steady year-round work for all of our Class A CDL drivers. Most of our drivers have been with us for more than 5 years and 17% have been here longer than 10 years. Base pay is $27.50 ST/$41.25 OT for swing shift, with OT pay after 40 hours. Our drivers are earning $78-$100+K Each Year!! We are currently recruiting to fill the following swing shift chip truck driving positions out of Eugene: • 1-2 positions available for drivers possessing a valid CDL-A license with previous experience driving a 53-foot trailer To be considered, you must have minimum 1-year recent verifiable Class A CDL driving experience and a clean MVR. Chaining and ability to chain will be required. Must have physical ability to put on chains weighing up to 50lbs in inclement weather. View the video to learn more about what driving chips for Walsh is like: Walsh Trucking offers the following compensation benefit package: • Home daily • Weekly pay • Paid vacations and holidays • Medical/dental/vision • 401k company match If you are an experienced CDL A driver who is committed to safety and ready to work full time, we want to hear from you!! APPLY NOW or call Larry or Joe at (877)-469-2574 or 503-667-1912

Source:  craigslist View original post

Location
29166 Fox Hollow Rd, Eugene, OR 97405, USA
Show map

craigslist

You may also like

Craigslist
MFG-Sandblast, Mat Hander, Tube Roller, Radial Arm Drill Op, Assembly (Tulsa Metro)
Hiring for the following positions as soon as possible. Located in the West and South Tulsa Areas. Please send resume by responding to this ad, and/or please come in to interview M-Th 9:00am-4:30pm, walk ins welcome. ✔Sandblaster- Experience sand blasting on metals, to prepare for painting. Ideal candidate would have recent experience in this field. Pre-Paint/Sandblaster-Prepare metal parts for sandblasting $18.00-$20.00 Depending on experience, M-Th 7:00am-5:30pm with Friday OT ✔Material Handler-Previous experience working in a mfg warehouse, position will require using computers, inventory, driving forklift with oversized items inside and outside. M-Th 7:00am-5:30pm with Friday OT $18.00-$20.00 ✔Tube Roller-Experience running a machine that rolls sheets of metal to create tubes for heat exchangers. Load sheet metal into the machine and unload finished product. Required to use overhead cranes when needed. Will be lifting up to 50lbs or move, bend stand and stoop down as required. $20.00-$23.00+ Depending on experience. ✔Shop Helper- Previous fabrication shop and/or assembly experience setting up heat exhangers. Assemble heat exchangers per prints, use overhead crane,tape measure, assemble fans, connect frame using all types of hand tools.These positions do require ability to bend, stand and stoop over the course of the day. Ability to lift up to 50lbs as needed. Pay: $17.00 hourly Radial Arm Drill Operator -Previous experience running a radial arm drill, Will be required to set up and operate radial arm drill such as boring, reaming, and tapping placing holes into metal parts for heat exchangers. $20.00-$23.00 to start Hours: M-F 6:00am-2:30pm, Overtime as required! Resumes can be send by responding to this ad. Please come in to interview for these positions at Oklahoma Staffing Specialists 5649 S. Mingo Rd. Ste A M-Th 9:30am-4:00pm.
5620 S Mingo Rd, Tulsa, OK 74146, USA
$17-23/hour
Craigslist
MFG-Sandblast, Mat Hander, Tube Roller, Radial Arm Drill Op, Assembly (Tulsa Metro)
Hiring for the following positions as soon as possible. Located in the West and South Tulsa Areas. Please send resume by responding to this ad, and/or please come in to interview M-Th 9:00am-4:30pm, walk ins welcome. ✔Sandblaster- Experience sand blasting on metals, to prepare for painting. Ideal candidate would have recent experience in this field. Pre-Paint/Sandblaster-Prepare metal parts for sandblasting $18.00-$20.00 Depending on experience, M-Th 7:00am-5:30pm with Friday OT ✔Material Handler-Previous experience working in a mfg warehouse, position will require using computers, inventory, driving forklift with oversized items inside and outside. M-Th 7:00am-5:30pm with Friday OT $18.00-$20.00 ✔Tube Roller-Experience running a machine that rolls sheets of metal to create tubes for heat exchangers. Load sheet metal into the machine and unload finished product. Required to use overhead cranes when needed. Will be lifting up to 50lbs or move, bend stand and stoop down as required. $20.00-$23.00+ Depending on experience. ✔Shop Helper- Previous fabrication shop and/or assembly experience setting up heat exhangers. Assemble heat exchangers per prints, use overhead crane,tape measure, assemble fans, connect frame using all types of hand tools.These positions do require ability to bend, stand and stoop over the course of the day. Ability to lift up to 50lbs as needed. Pay: $17.00 hourly Radial Arm Drill Operator -Previous experience running a radial arm drill, Will be required to set up and operate radial arm drill such as boring, reaming, and tapping placing holes into metal parts for heat exchangers. $20.00-$23.00 to start Hours: M-F 6:00am-2:30pm, Overtime as required! Resumes can be send by responding to this ad. Please come in to interview for these positions at Oklahoma Staffing Specialists 5649 S. Mingo Rd. Ste A M-Th 9:30am-4:00pm.
5620 S Mingo Rd, Tulsa, OK 74146, USA
$17-23/hour
Cookie
Cookie Settings
Our Apps
Download
Download on the
APP Store
Download
Get it on
Google Play
© 2025 Servanan International Pte. Ltd.