Warehouse**19.50/hr**Local Company! Little Exp Needed**Public Trans**

Mechanical Assembler Little previous experience in manufacturing is required. You can do this job if you have strong general mechanical skills and a desire to learn! Our client is locally owned and operated. Established in 1949, it has grown into a regional and national industrial equipment supplier, providing a combination of value added technical services, engineering, consultation, and quality products to a variety of markets. They provide mission-critical equipment to a wide variety of industries including Fortune 500 companies. PRIMARY DUTIES: Assemble and test large industrial products from bare parts, in "job shop" and production environment. This includes mechanical connections, supports and structures, and control panels. Build custom air compressor, vacuum pump, blower, and pump assembly packages. DESIRED QUALIFICATIONS: • Some experience to build and disassemble an engine or machine • Electronic Panel Assembly experience preferred but not required • Read & interpret assembly drawings • Mechanical skills • Physically able (lifting of 50 lbs occasionally) • Work well independently/self-starter and with a team DUTIES AND RESPONSIBILITIES: Such duties include, but are not limited to: • Assemble mechanical assemblies; such as air ends, blowers, and other compressed air system components, working on a shop floor. • Inspects components for proper assembly, specifications, fit and finish. • Plans assembly and positions components according to the knowledge of unit being assembled and through the interpretation of engineering drawings, layout drawings or electrical schematics. • Remove small quantities of metal with hand files, scrapers or machine tools to produce close fit between parts. • Bend and install tubing and fittings for oil lubrication/cooling systems. • Align couplings and subassemblies to the gearbox or other components. • Operate drill presses, milling machines, lathes, hydraulic presses, welders and other shop equipment to assist in assembly operations. • Test completed assemblies for proper operation, temperature, vibration and noise levels and complete required written reports. Troubleshoot, repair or replace faulty components. • Provide feedback in regards to design improvements, updates, and procedures, verbally and in writing, as required. • Work in conjunction with Floor Supervisor to ensure assemblies meet design parameters. • Perform workstation and shop clean-up duties as assigned. EDUCATION, EXPERIENCE, SKILLS, AND KNOWLEDGE Qualifications and Requirements: • Education: High School diploma or GED preferred, but not required. • Specialized training: mechanics, electrical • Previous experience is desired but not required. It should include mechanical assembly and disassembly. Desired Skills • The ability to learn to read and use handheld mechanical measurement devices (micrometer, dial indicator, caliper) as well as electrical measurement devices (Fluke meter). • Recognize common mechanical and electrical components • Passion for auto mechanics, building and/or tinkering with mechanical components • Excellent communication skills • Must work well with others in a safe and self-directed manner • Reading: Read and interpret the following documents: operating and maintenance manuals, employee manuals, safety guidelines, electrical schematics, blueprints, mechanical sketches, and electrical and mechanical reference charts. Day Shift: 5:00 am to 1:30 pm **Not public transportation accessible** Pay rate: $21.00/hr to start! Email us at portlandwest@pridestaff.com Or Call Today to Apply! 971.371.4028 And Walk-ins are welcome Monday to Friday from 9:00 am to 3:30 pm. 12600 SW Crescent Street Beaverton, OR 97005 PrideStaff Portland is a locally owned and operated Staffing Agency. PrideStaff is a winner of the coveted "Best of Staffing" Diamond award for 15 consecutive years for the highest level of satisfaction as rated by our valued Employees and Clients. Over the years, PrideStaff has been a consistent industry leader, developing technology and service processes that allow our organization to deliver superior performance. When it comes to your success, we leave nothing to chance. Let us support your job and career search and see the difference PrideStaff can make!

Subject: 🚨 Immediate Openings at Pacific NW Beverage Company! | Temp-to-Hire Forklift, Sanitation ,Dock Workers & Production Roles Are you ready to join a cornerstone of the Pacific Northwest beverage industry? CSR Personnel is actively recruiting for several exciting temp-to-hire positions with the Clackamas Distribution Company. This leading, 24/7 co-packer committed to quality and innovation, utilizing state-of-the-art equipment. If you are dependable and have a passion for efficiency, we want to hear from you immediately! Current Open Positions (Clackamas, OR) We offer competitive wages and a $2.00 per hour shift differential for all hours worked between 7:00 PM and 5:00 AM. Position Wage Schedule Details Forklift Driver (Line) $21.00/hour + differential 6:00 PM – 6:30 AM (2-2-3 rotation) Night Shift Forklift Driver (Dock) $21.00/hour Schedule 1: Friday – Tuesday, 6:00 AM – 2:30 PM Day Shift Forklift Driver (Dock) $21.00/hour Schedule 2: Wednesday – Sunday, 6:00 AM – 2:30 PM Day Shift Production Tech $21.00/hour + differential 6:00 PM – 6:30 AM (2-2-3 rotation) Night Shift Sanitation Tech $19.00/hour Schedule 1: Wednesday – Saturday, 5:00 AM – 3:30 PM Day Shift Sanitation Tech $19.00/hour Schedule 2: Monday – Friday, 12:00 PM – 8:30 PM Day Shift Next Steps: These positions are filling quickly! If you are interested in joining this Clackamas Bottling team, please reply to this email immediately with your current resume, including dates of employment. We look forward to connecting you with this great opportunity! Best regards, Jacquie Bartow CSR Personnel 347 NE Hood Ave. Gresham, OR 97030 Office: 503-665-7790

NOW HIRING: Machine Operator – Food Production (McMinnville, OR) 🚨 All Star Labor & Staffing is currently hiring Machine Operators for a fast-paced Food Production Company in the McMinnville area. If you have a strong mechanical aptitude, attention to detail, and thrive in a team-driven environment – we want to hear from you! 💼 Responsibilities: • Operate and monitor food production machinery safely and efficiently • Set up machines for production runs and ensure proper calibration • Perform routine equipment maintenance and troubleshooting • Document machine settings, output, and any production deviations • Follow strict safety and quality protocols at all times 🔧 Requirements: • Ability to read technical manuals and production documents • Strong mechanical and troubleshooting skills • Detail-oriented with a focus on product quality • Excellent communication and teamwork skills • Ability to work in a fast-paced, physically demanding environment • Flexible with schedule and open to overtime • Commitment to safety and compliance 💪 Physical Requirements: • Frequent walking, bending, stooping, and lifting (up to 70 lbs) • Use of hands/arms for repetitive tasks • Occasional kneeling, climbing, and working at heights • Ability to operate dolly/forklift to move full drums of chemicals 🕒 Schedule & Pay: Day Shift: $20.63/hr Graveyard Shift: $23.13/hr (includes $2.50 night differential) Rotating Shifts: Shift 1: Sun – Every Other Wed | 4am – 4pm Shift 2: Sun – Every Other Wed | 4pm – 4am Shift 3: Every Other Wed – Sat | 4am – 4pm Shift 4: Every Other Wed – Sat | 4pm – 4am 🎯 Perks Once Hired On: • Medical, Dental, Vision, and Voluntary Benefits • 401(k) with 3% Employer Contribution • 40 Hours of Sick Pay • Vacation Pay (Up to 120 hours per year based on tenure) If you are interested, please Call/ Text 503-619-0811

Night Shift Batching Technician - Clackamas Beverage Company! 4 /10's Are you a dependable, detail-oriented team player with a strong work ethic? CSR Personnel is recruiting on behalf of our client, a fantastic Beverage Company in Clackamas, OR, for a dedicated Batching Technician to join their team! This is an excellent opportunity to be a key player in food production excellence! The Details: Job Title: Batching Technician Location: Clackamas, OR (97015) Schedule: Sunday – Wednesday, 7:00 PM – 5:30 AM Compensation: Starting Wage: $24.00 per hour! (More for experienced Technicians!) Bonuses: Minimum monthly bonuses equivalent of up to 6% of wages! What You'll Be Doing: As a Batching Technician, you'll work closely with Quality Assurance and Production Managers to ensure the highest standards of quality and safety. Your key responsibilities include: Accurately staging and preparing raw materials for efficient mixing operations. Monitoring the mixture of ingredients according to written formulas. Pulling correct quantities of ingredients per the production plan. Strictly following Good Manufacturing Practices (GMPs) to ensure product safety and prevent contamination. Completing required production paperwork accurately. Cleaning and disinfecting mixing tools and work areas. What You'll Bring: HS Diploma or GED. The ability to lift 50 – 60 pounds regularly. Six months of experience in food processing or sanitation is preferred, but your work ethic is what matters most! A history of good job stability/work history. Competitive Benefits Package! Our client offers a positive and friendly work environment along with a truly competitive benefits package, including: Generous Paid Time Off: 3 weeks PTO + 9 Paid Floating Holidays Health: Medical (including Prescription and Vision) and Dental coverage. Financial Security: 401K with company match, Life & Accidental Death and Dismemberment, Short-Term and Long-Term Disability. Additional Perks: Tuition Reimbursement, Employee Assistance Program (EAP), Flexible Spending Account (FSA), and targeted learning opportunities. Ready to join a company that stimulates team spirit, passion, and achievement? Apply TODAY! Forward your resume immediately to CSR Personnel Recruiter or call us to schedule an interview! CSR Personnel 347 NE Hood Ave Gresham, Oregon 97030 📞 503.665.7790

Shipping, receiving, warehouse, packing, assembly. General warehouse opening. M-F 7am-3:30 pm. Chatsworth CA. Resumes via email.

Volt is immediately hiring Soldering Assembler's for a local leading manufacturing company in Kearny Mesa. As a Soldering Assembler you will: - Builds cable and wire harnesses, box assemblies, kits, and other products from start to finish while working under indirect supervision - Follows work orders, instructions, and sample assemblies to complete tasks - Performs tasks such as labeling, cutting wires, crimping, soldering, assembling parts, packaging, and testing for quality - Work with variety of different cables such as round, shielded, flat, and coax cable. - Utilize traditional and non-traditional tools such as cable strippers, cable cutters, crimp tools, heat guns, pliers, screwdrivers, and more) - Assist in the QMS and the commitment for continuous improvement - May be assigned other duties as needed This is a Full-Time Temp-to-Hire Opportunity The ideal candidate must have: - 1-2 years experience in electro- mechanical assembly - Soldering and electrical experience - High School Diploma or equivalent manufacturing work related - Knowledge IPC 610/ 620, J-STD-001 certification preferred - Must have good hand/eye coordination and the ability to use microscopes - Able to read and interpret blueprint, schematics, electrical drawings, etc. - Ability to use hand tools- long nose pliers, side cutter, and soldering iron. - Must be able to distinguish colors - Ability to compute measurements accurately Schedule: Monday – Friday, 7:00AM - 3:30PM Pay Rate: $19 - $25 per hour, DOE *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP).