Browse
···
Log in / Register

Experienced Frame-to-Finish Carpenters ($25-45/hr DOE) (Portland)

$25-45/hour

2000 SE 10th Ave, Portland, OR 97214, USA

Favourites
Share

Description

Hammer & Hand is seeking experienced full-time Frame-to-Finish Carpenters to join our Portland team! Frame-to-Finish Carpenter QUALIFICATIONS • Approximately 5 years of custom carpentry experience including framing, envelope, and trim install • Experience with remodel and new build projects • Knowledgeable of materials, methods, and the tools involved in the construction of buildings and other structures • Must be able to keep accurate records and perform timekeeping, including electronic submittals • Must have reliable transportation, a valid driver’s license, and a clean driving record • Must have full selection of tools to perform the work • High level of accuracy and pride in your craft • Ability to lift 50lbs APPLY HERE: https://hammerandhand.com/careers/ No phone calls, please. Thank you for your interest! To apply, please submit an application through the link above, and we’ll be sure to reach out to you if we decide to move forward. -- About Hammer & Hand Established in 1995, Hammer & Hand is a general contractor celebrating 30 years in partnership with clients and architects in the Pacific Northwest. Our reputation is built on decades of dedication from individuals who are as passionate about their jobs as they are about their lives outside of work. Based in Portland and Seattle, our firm serves clients by empowering employees, harnessing 21st century building science, and advancing the tradition of craftsmanship. From classic remodels to design-forward commercial build-outs and high performance passive buildings, Hammer & Hand’s projects are crafted with care and built to last. We work hard to foster an atmosphere that supports our most valuable asset: our people. As such, we are proud to announce that we are on the path to 100% employee ownership. We offer a dynamic workplace, as well as a full range of benefits, including: • Competitive Industry Wages • 100% Employer Paid Medical and Dental Benefits • Optional Vision Plan • Alternative Health Care reimbursement program for chiropractic, massage, and acupuncture • 401k Retirement Savings Plan • Employee Stock Ownership Plan • Paid Time Off and Paid Holidays • Long-Term Disability Insurance • Profit Sharing • Employee Assistance Program We are always looking for the best talent to join our team and are aware that a great candidate for a job may come from a less traditional background. Studies have shown that women, LGBTQIA+ individuals, and people of color are less likely to apply for a job when they believe they may not meet all of the qualifications in a job description. We strongly encourage you to apply even if you’re not sure you meet every one of our qualifications. If you are unsure, you can contact us through our website with questions about how this would be determined. We do occasionally have openings for those looking to hone their craft and build their skillset. These are paid positions. Please do not hesitate to apply if you feel you have the aptitude to succeed with us! See more about our employment philosophy here: https://hammerandhand.com/careers/ Hammer & Hand is committed to equal opportunity in employment and does not discriminate based on race, color, creed, religion, sex, age, national origin, mental/physical disability, sexual orientation, gender identity/transgender status, military/veteran status, genetic information, or any other status/characteristic protected under applicable law.

Source:  craigslist View original post

Location
2000 SE 10th Ave, Portland, OR 97214, USA
Show map

craigslist

You may also like

Craigslist
COMMERCIAL HVAC SERVICE / START UP TECHNICIAN (Northern California)
Northern California Based Commercial HVAC Contractor seeking to hire an experienced service technician with light installation background for accounts throughout Northern California. This is a hybrid position of sorts as the perspective employee would manage basic service calls on commercial only projects, but also complete control prewires of new construction projects, installation of cooper refrigerant line sets and installation of system components such as economizers, power exhaust, etc. This employee will also perform equipment start up; testing & commissioning as required. Minimum 5 years’ experience in COMMERCIAL HVAC systems with package units, splits systems, duct less splits & VRF-VRV systems. All applicants must possess basic service tools and complete knowledge of COMMERCIAL HVAC systems & controls. All applicants must prove a clean DMV record and be insurable under commercial auto insurance. A positive outlook, be punctual, motivated and able to perform individually on projects without supervision. This is an opportunity to join a growing team with a professional company. The position offers growth opportunity to assist in building a service department and the eventual position of managing said service department. Maxon Mechanical, Inc is committed to employees looking for a long-term secure employment opportunity with growth and advancement opportunities available. Interested candidates please provide a resume with a summary of previous work experience, references and contact information. Applications are available on our web site at www.maxonmechanical.com. Please send all applications and resumes to info@maxonmechancial.com, a representative from our team will contact you to schedule an interview. We offer competitive wage and benefit package base on experience and knowledge of commercial HVAC service & start up. Paid vacation, holidays.
50 Sierra College Blvd, Loomis, CA 95650, USA
Negotiable Salary
Craigslist
Structural Steel Fitter/Fabricator Needed
Superior Skilled Trades is seeking Structural Steel Fitters/Fabricators for immediate hire in Cocoa, FL. WEEKENDS OFF! TEMP-TO-PERM! Interested? Text "Cocoa" to SST at 321-418-6504 to get started! · PAY: $20/hr-$25/hr (based upon experience) · HOURS: Expected shifts will be 8 hour days starting at 7AM · SCHEDULE: Expected Work will be Monday-Friday, 40+ hours/week · START DATE: ASAP · DURATION: This is a temp-to-perm position Structural Steel Fitter/Fabricator Job Description: As a new Structural Steel Fitter/Fabricator at Superior Skilled Trades, you can expect each day to be filled with excitement and challenges that will keep you engaged and motivated. You will be working on a Monday through Friday schedule from 7 am to 3:30 pm, with opportunities for overtime. Your daily responsibilities will include interpreting blueprints, measuring and cutting steel pieces with precision, and fitting them together using specialized welding techniques. You will collaborate closely with our team of experts, problem-solving and ensuring that each project meets the highest standards of quality and safety. We believe in fostering a supportive and collaborative environment, where you will have the opportunity to learn from experienced professionals and expand your skillset. Your dedication and attention to detail will be instrumental in producing outstanding results and contributing to the success of our projects. Qualifications for Structural Steel Fitter/Fabricator: · Experience interpreting blueprints, measuring, cutting, fitting, and welding structural steel. Understanding of pre-heat functions to ensure optimal welding performance. · Proficiency in setting up and using a track torch is required to efficiently cut steel pieces to size. As part of our commitment to safety and quality, you must pass all tack tests for F.A.C.W. (Flux Core) welding and work in compliance with our safety policies and procedures. · Flexibility is key in this role, as you must be willing to work any schedule required, including overtime and Saturdays as needed. · Must be able to safely use hand/power tools and PPE · Must be able to perform job duties that require standing, crouching, twisting upper body, working at heights, and lifting up to 50 lbs. unassisted. · Position requires the use of PPE, including: Steel-Toe work boots, safety vest, hard hat, safety glasses, and gloves. Additional Requirements for Structural Steel Fitter/Fabricator: · Must be eligible to work in the United States · Must have reliable transportation to the job site · Depending on assignment, applicants may be subject to pre-employment drug screen and background screening. SST IS AN EQUAL OPPORTUNITY EMPLOYER! Hablamos Español! LLamenos a nuestras oficinas y pida comunicarse con alguien que hable español!
1985 Cox Rd, Cocoa, FL 32926, USA
$20-25/hour
Cookie
Cookie Settings
Our Apps
Download
Download on the
APP Store
Download
Get it on
Google Play
© 2025 Servanan International Pte. Ltd.