Cabinet Maker / Installer (Astoria, Queens)

Apply Now Means Engineering is looking for a highly experienced Sr. Machinist to join our team. Under limited supervision and with detailed instructions the individual will fabricate, maintain, repair and/or alter metal parts, set up and operate metalworking machines, compare finished work to specifications, measure, mark and scribe metal stock, and perform related work as required. The Machinist III will assist Machinists I and II as needed and will partner with the Lead to help train and develop the team. The Machinist III should be able to complete the most complex machining tasks with little to no assistance.  Essential Functions: Perform the following functions in accordance with MEI policies and procedures. Inspect parts for quality and compliance; capability level: advanced Plan job and prepare materials, work; capability level: advanced Perform benchwork and layout activities; capability level: advanced Milling set-up, operations and processes; capability level: advanced Turning set-up, operations and processes; capability level: advanced Grind parts, components, and surfaces; capability level: advanced Troubleshoot processes and parts; capability level: advanced Edit CNC Programming Setup Sheets with necessary adjustments, corrections, or propose improvements. Document all worked operations in the ERP system in an accurate and timely manner. This includes documenting the job/operation, documenting the time, and indicating conformance (including written comments to document/clarify transactions); work to meet job time standards Create nonconformance report as needed, properly identifying the nonconformity, root cause and labeling the part. Assist process engineering in determining job time standards and developing new production processes for new product introduction (NPI) and for continuous improvement Complete housekeeping and preventative maintenance and cleaning tasks as needed every shift Expected to work in a safe manner and in accordance with established operating procedures and practices Observe all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the company   Education, Experience, and Skills: 7+ years of related experience with at least 5 years of experience as a machinist; or equivalent combination of education and experience Must have strong English communication skills to understand verbal and written instructions, communicate with other employees both verbally and in writing, follow directions and tasks lists, and participate in departmental team meetings and required training classes Advanced math skills- college level Algebra, geometry, and some trigonometry Advanced measurement skills Ability to read, interpret technical drawings and standards Ability to interpret, and document QC standards as part of the operation Knowledge of tooling capabilities Knowledge of safety standards for equipment being run Ability to quickly react to non-conforming operations as they occur Ability to produce parts within tolerances Ability to measure, cut, or work on items with great accuracy Salary Range $31.26 - $40.57 per hour or DOE ITAR Requirements This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. MEI is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. recblid qezsevehx7cr5eeflctradrm6bbt33 Apply Now

Rex Engineering Corporation is a Manufacturing Company that was founded in 1974 in Miami and relocated to Titusville in 1994. Many of our employees made the move with us and some remain employed here today. We manufacture small electric, sub fractional horsepower gear motors, and service a worldwide market. Currently we are a family of 60+ employees. We offer Medical, Dental, Life Insurance, 401k Benefits, paid Vacation and Holidays. Our facility is air conditioned and comfortable. If you feel you would be a good fit for our company, please consider the below information and submit your resume or reply to this post. Shipping Clerk: The Shipping Clerk is responsible for packing and preparing packages for delivery, both nationally and internationally. Must be a Self-Starter with excellent organizational Skills. Must have excellent communication skills. Must be Reliable. Must be Detail Oriented. Must have the ability to read shipping documents. Place finished products in boxes for shipping and storage using the appropriate packing materials to prevent breakage or damage. Ensuring the packaging of shipments to customer specifications are in compliance with policy. Closing and sealing boxes, applying labels, or entering identifying data onto boxes. Must be able to lift 60 lbs. Must have reliable transportation Must be on time and ready to work

Mount This Fish Company is looking for a highly motivated individual to fill the last open position and join our team at entry level to assist our production staff with assembly of our fish replicas. Mount This Fish Company replicas are life lasting memories for avid anglers and wall decor displayed throughout the world. Primary tasks: -- Glassing Molds -- Assembling Blanks -- Cutting Blanks Occasional Additional tasks: -- Prepping Blanks For Paint -- Assisting Senior Staff On Misc Production Tasks Starting rate is $16/hr with a 30 day evaluation period. Raise is possible at the 90 day review dependent on ability to comprehend and complete our process and techniques. Most employees are up to $17/hr at the 90 day mark. We do have an incentive program that rewards the team for high performance increasing hourly rate by up to $3/hr. Employees may be eligible after 90 days. Hand eye coordination is necessary for pneumatic tool use. Knowing your fish specie is not required but is highly preferred. Medical Insurance 50% copay available after 6 months. PTO available after 1 year. This position will require you to wear a ventilation mask at times. Please message with questions or resume if interested. This is a Fiberglass Manufacturing Company. If you have sensitive skin, can't handle the heat or are extremely sensitive to a fast paced environment please do not apply. Position is available to begin immediately at part time (30 hours) and work into full time as techniques and processes are learned. This normally takes about 2 weeks to transition into full time. No Recruiters Please

Mount This Fish Company is looking for a highly motivated individual to fill the last open position and join our team at entry level to assist our production staff with assembly of our fish replicas. Mount This Fish Company replicas are life lasting memories for avid anglers and wall decor displayed throughout the world. Primary tasks: -- Glassing Molds -- Assembling Blanks -- Cutting Blanks Occasional Additional tasks: -- Prepping Blanks For Paint -- Assisting Senior Staff On Misc Production Tasks Starting rate is $16/hr with a 30 day evaluation period. Raise is possible at the 90 day review dependent on ability to comprehend and complete our process and techniques. Most employees are up to $17/hr at the 90 day mark. We do have an incentive program that rewards the team for high performance increasing hourly rate by up to $3/hr. Employees may be eligible after 90 days. Hand eye coordination is necessary for pneumatic tool use. Knowing your fish specie is not required but is highly preferred. Medical Insurance 50% copay available after 6 months. PTO available after 1 year. This position will require you to wear a ventilation mask at times. Please message with questions or resume if interested. This is a Fiberglass Manufacturing Company. If you have sensitive skin, can't handle the heat or are extremely sensitive to a fast paced environment please do not apply. Position is available to begin immediately at part time (30 hours) and work into full time as techniques and processes are learned. This normally takes about 2 weeks to transition into full time. No Recruiters Please

Mount This Fish Company is looking for a highly motivated individual to fill the last open position and join our team at entry level to assist our production staff with assembly of our fish replicas. Mount This Fish Company replicas are life lasting memories for avid anglers and wall decor displayed throughout the world. Primary tasks: -- Glassing Molds -- Assembling Blanks -- Cutting Blanks Occasional Additional tasks: -- Prepping Blanks For Paint -- Assisting Senior Staff On Misc Production Tasks Starting rate is $16/hr with a 30 day evaluation period. Raise is possible at the 90 day review dependent on ability to comprehend and complete our process and techniques. Most employees are up to $17/hr at the 90 day mark. We do have an incentive program that rewards the team for high performance increasing hourly rate by up to $3/hr. Employees may be eligible after 90 days. Hand eye coordination is necessary for pneumatic tool use. Knowing your fish specie is not required but is highly preferred. Medical Insurance 50% copay available after 6 months. PTO available after 1 year. This position will require you to wear a ventilation mask at times. Please message with questions or resume if interested. This is a Fiberglass Manufacturing Company. If you have sensitive skin, can't handle the heat or are extremely sensitive to a fast paced environment please do not apply. Position is available to begin immediately at part time (30 hours) and work into full time as techniques and processes are learned. This normally takes about 2 weeks to transition into full time. No Recruiters Please

Join the Kniesel’s Collision Family! Company Overview: Kniesel's Collision is a family-owned and operated business with over 56 years of excellence in the collision repair industry. With 13 state-of-the-art locations across El Dorado, Placer, Sacramento, and Yolo counties, we pride ourselves on delivering high-quality repairs and exceptional customer service. Join our team and be part of a company where your skills are valued and you can grow your career in a dynamic, supportive environment. Position Summary: Kniesel's Collision, a family-owned leader in collision repair with multiple locations across Northern California, is seeking a dedicated and detail-oriented Auto Body Detailer to join our team. The ideal candidate will be responsible for performing thorough cleaning and detailing of customer vehicles following repair services, ensuring a pristine presentation that reflects our commitment to excellence. Position Available: Auto Body Detailer (Full-Time) Location: Kniesel's Collision – Auburn, 13810 Lincoln Way, Auburn, CA 95603 Key Responsibilities: Vehicle Detailing: Perform comprehensive interior and exterior detailing of vehicles following collision repairs, including washing, waxing, polishing, vacuuming, and removing dust and debris. Quality Assurance: Conduct thorough inspections to identify any remaining dirt, damage, or imperfections, ensuring all vehicles meet Kniesel’s Collision’s high-quality standards before delivery. Cosmetic Touch-Ups: Perform minor cosmetic enhancements such as paint touch-ups, headlight polishing, and blemish correction to improve overall vehicle appearance. Customer Satisfaction: Collaborate with team members to ensure vehicles are returned to customers in pristine condition, contributing to a positive customer experience. Work Area Maintenance: Maintain a clean, organized, and safe detailing area, ensuring all tools and equipment are in proper working condition. Technical Assistance: Support repair technicians with prep work such as masking, taping, and sanding as needed. Inventory Management: Monitor and restock detailing supplies and tools to maintain adequate inventory. Other Duties: Perform additional responsibilities as directed by the Production Manager or General Manager. Skills and Requirements: Prior experience in automotive detailing or a related field is a plus. Strong attention to detail with a commitment to excellence. Ability to work efficiently both independently and in a team environment. Basic knowledge of automotive cleaning products and procedures. Valid driver’s license and clean driving record. Physically able to stand, kneel, bend for extended periods, and lift up to 50 lbs. Core Values: Our ideal candidate aligns with Kniesel’s Core Values: WOW Customer Service Integrity Humility Family The Golden Rule Quality What We Offer: Competitive hourly wage ($18–$25/hr DOE) Medical, dental, and vision insurance Paid time off, including vacation, sick time, and paid holidays 401(k) retirement plan with company match Free I-CAR training and ongoing professional development A positive, respectful, and collaborative team environment Opportunities for career advancement within a growing, multi-location company A stable and reputable company with over 55 years of family-owned excellence State-of-the-art equipment and a clean, modern workspace Employee discounts on services How to Apply: If you take pride in making vehicles shine and want to grow your career in a professional, supportive environment, we’d love to hear from you! Please submit your resume and cover letter at: www.kniesels.com/careers Kniesel's Collision is an Equal Opportunity Employer We are committed to creating a diverse and inclusive work environment and welcome applicants from all backgrounds.