Gainesville Engineering Job Listings

DCS Engineer(digital controls)63851805620993120

Workable

DCS Engineer(digital controls)

In this role, you will function as a technical bridge between our Digital Product Owners and our Regional Engineering team focused on solving our client’s business problems in the areas of Performance, Reliability and Availability. On a day-to-day basis, process control engineers spend 75% of their time in the back office on project related activities while the other 25% will be spent onsite testing and/or directing our client’s operational team (process control engineers work 9-to-5 on a full-time basis). Working Conditions: · Normal power plant environment and/or out-of-doors work environment. · Work around large rotating equipment, energized electrical equipment in high noise areas, climb stairways, ladders. · Must be prepared to work extended hours; varied/rotating shifts with weekend and holiday work as required by schedules, workload, and project conditions. · Ability to work in mentally stressful environments: must be able to react to crises where immediate action is required to correct or curtail potentially damaging or hazardous situations. · Projects tasks will include but not limited to: · Researching and developing new innovative solutions · Managing project cost and time constraints · Software Engineering for our traditional DCS modernization business · Bottom end cycle tuning and optimization · Process control health assessments · Collecting data, authoring reports, and presenting findings to senior management & our clients Requirements How You’ll Make an Impact (responsibilities) · Work with a niche project team to design and implement controls solutions using the SPPA-T3000 within a Power Plant Environment. · Effectively demonstrate the ability to deliver on complex situations or problems without guidance or supervision. · Being able to contribute to our business’s digital transformation through innovative technology tools and data analytics. · Adapt and integrate products to create digital services and achieve customer outcomes. · Aid in designing site-specific control logic from customer specifications, SAMA diagrams, logic diagrams, and reverse-engineering of ladder-logic, or existing code. · Aid in designing, developing, and testing engineering modifications of solutions. · Perform and track changes for complex new software designs, processes, or design changes to meet specified requirements. · Aid in performing on-site studies to determine cost benefits of startup optimization, heat rate optimization, startup sequencing, alarm, and manual operator intervention reduction at power generation facilities. · Aid in perform efficiency calculations for Plant Heat Rate, Boiler Efficiency, combustion turbine efficiency. · Experience with advanced analytics, artificial intelligence (AI) and/or machine learning in operational technologies · Perform plant integration and aid with loop checks of new and existing instruments and commissioning of engineered control logic. · Work with Supervisors, Maintenance, Engineering and Operations to plan, procure and document maintenance activities. · Maintaining strict adherence to site specific safety rules and regulations · Knowledge in field of industrial communication protocols for third party interfaces (Modbus, IEC60870, IEC61850, OPC UA) will be an advantage. · Proven experience with DCS system and HMI/SCADA system. · Continuously develop own knowledge and skills and help others to grow and develop Travel Requirement: · 20-35 % travel required. What You Bring (requirements) · Bachelor of Science from an accredited university · Minimum of 8 years in process control (preferable combined cycle power plants) · Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization.

Alpharetta, GA, USA

Negotiable Salary

Service Project Manager(Controls & Turbomachinery)63848207325569121

Workable

Service Project Manager(Controls & Turbomachinery)

The Service Project Manager is responsible for managing customer service requests for the Controls group reporting to the Operations Manager. The Service Operations group is responsible for supporting customers with installed Control Systems. Execution of these requests could range from service contracts, fixed price projects, and time and material jobs. The service operations is a 24/7 operation and the face to the customer. We seek responsible people with exceptional self-starting capabilities. Technically competent to assess customer needs and troubleshoot issues efficiently. Communicate professionally in difficult situations. Manage complex projects involving multiple internal and external groups Responsibilities • Managing individual service contracts • Execute fixed price projects • Create and deliver time & material quotes • Create and deliver parts quotes • Collaborate with commercial group on forecasting revenue and submitting invoices • Collaborate with proposal group on development of proposals • Collaborate with sales personnel on customer requests • Participate in resource planning meetings. • Participate in customer outage planning meetings. Requirements A degree in engineering, project management, or equivalent professional experience Minimum of 5 years’ experience in engineering or project management roles. Experience with rotating equipment is highly preferred, experience with power plants or boilers is preferred. Experience with the pulp and paper industry may be acceptable 5 years of experience in DCS (Siemens preferred) or PLC (Siemens preferred) platforms Collaborated effectively in teams, showing assertiveness and motivating others with customer focus and strong decision-making. Proven experience working in and leading project teams Ability to work effectively in international and cross-functional teams Will work from the office and travel to sites up to 20%

Alpharetta, GA, USA

Negotiable Salary

Workable

Project Manager

The Project Manager position is responsible for the delivery of Control Systems for the Power Generation Industry. These projects include design, manufacturing, testing, installation, and commissioning. Solutions include Distributed Control Systems, PLCs, and Excitation (SEE/SFC) systems. Equipment to be controlled includes Gas Turbines, Steam Turbines, HRSGs, and Generators. The successful candidate will directly support the Manager of Project Execution and will have responsibility for the profit/loss, schedule performance, and customer satisfaction of the projects assigned. The role of the Project Manager is to plan, execute, and complete projects according to deadlines and within budget Requirements · Define and track scope, schedule, budgets, risks and deliverables. · Delegate tasks, and effectively communicate with team members. · Report project financial status regularly to management. · Generate change order requests. · Select and procure the services of Electrical Contractors for installation. Required Knowledge/Skills, Education, and Experience: · Bachelor’s degree in engineering or equivalent. · 3 to 5 years of successful Project Management experience with complex control/electrical systems projects for external customers. Must be external customer-facing experience. · Ability to manage multiple projects simultaneously. · Strong leadership, technical, oral, and written communication skills; presentation skills · Travel required: 5% · Qualified Applicants must be legally authorized for employment in the United States and will not require employer sponsored work authorization now or in the future for employment in the United States. Preferred Knowledge/Skills, Education, and Experience: · Experience with DCS or PLCs is a plus. · Experience with SFC/SEE (Thyripol, WDR, RG3) is a plus. · Technical/Commercial knowledge of Combined Cycle Power Plants (CCPP) is a plus. · Cybersecurity/NERC CIP knowledge is a plus. · PM Certification, PMP Certification, or IPMA certification highly desirable.

Alpharetta, GA, USA

Negotiable Salary

Part-Time Seasonal Landscaper (Lawrenceville/ Snellville)63517618587139123

Craigslist

Part-Time Seasonal Landscaper (Lawrenceville/ Snellville)

🌿 Now Hiring: Part-Time Seasonal Landscaper (Commission-Based) 🌿 📍 Work Location: Based in Lawrenceville / Snellville Company: 3 Guys and a Cybertruck Landscaping Are you looking for an opportunity to earn competitive pay, work outdoors, and be part of a motivated, professional team? 3 Guys and a Cybertruck Landscaping is currently hiring a Part-Time Seasonal Landscaper to join our crew for the season. 💼 Position Overview: This is a commission-based position—your earnings are directly tied to your effort and productivity. The harder you work, the more you earn. Responsibilities Include: • Lawn care, trimming, edging • Planting, mulching, weeding • Yard cleanup and general maintenance • Working collaboratively with a friendly, professional team Qualifications: • Reliable transportation to our meetup location in Lawrenceville or Snellville (transportation to job sites provided) • Capable of performing physical outdoor work • Dependable and punctual • Positive attitude with a willingness to learn Compensation & Schedule: • Commission-Based Pay – Compensation is based on the volume and quality of work completed • Flexible, part-time schedule available About Us: We are a local landscaping company dedicated to making lawns look their absolute best—known for our professional service and distinctive Cybertruck that gets noticed everywhere we go. 📲 How to Apply: To apply, please contact us at [Your Contact Information] with your name, availability, and any relevant experience. Come grow with us! 🌿

722 Winer Industrial Way, Lawrenceville, GA 30046, USA

Negotiable Salary

Workable

Field Service Engineer

The Field Service is specifically responsible to start-up commissioning Control System and in addition will support engineering and assist with factory test products. Familiar with the technologies for turbine generators of combustion turbines, steam as well as hydro units is a plus. This person is involved in all engineering activities associated with our business in the US, Canada and Americas. Position requires engineer to travel up to 90% of his time and stay for extended time (~ 6 weeks) on jobsites. There is allowance for Field Engineer to return home every third weekend subject to jobsite activities and at least one more week of that assignment. Field engineer is expected to work in non-air conditioned and high humidity environments during the removal of the old equipment and installation of the new equipment. Fire Resistant Clothing (being long sleeve and trousers), safety glasses, steel toe dielectric boots and hard hat are required during site visits (90% of field engineer’s on-site time). Due to construction, work environment is dusty or muddy. Work environment may have excessive amount of noise due to rotating combustion turbine operation coupled with generators requiring hearing protection devices. Especially during removal and installation of the equipment, machine grinder will be operating to cut the welding/bolts of the cabinets and a welding machine may need to be used during installation which generates high noise, small metal pieces and stress on the eyes due to flash / bright light emissions. Hazard protection is required for such conditions. Company will provide proper PPE. Field engineer should be able to lift 50lb. Most of the tool boxes weight around 45lb and may need to be carried up to turbine deck climbing up stairs. Due to nature of the service job, Field engineer will need to be available for travel on short notice regardless of the time of the day or day of the week. Outages on sites are kept as short as possible to be productive so this requires extended work hours and/or shift work/night work. Field engineer should be able to travel to job sites by airplane or by car. Field engineer are required to have a vehicle drivers’ license and should be able to drive to the work location and back to the resting location (home/hotel). Responsibilities Field Service Engineer will be responsible; Programming, start up and commissioning of turbine controls equipment Testing electrical equipment and providing test report Provide timesheets and expense reports in timely manner Providing training to the customer on site and in classroom Troubleshooting complex problems independently Write and follow procedures Provide feedback to the engineering department To provide phone support to our customers Work with Service manager and project managers to provide solutions Work with our suppliers, vendors, craft labor and contractors Follow safety policy and OSHA regulations Requirements Required Knowledge/Skills, Education, and Experience Field Service Engineer should have bachelor's degree in electrical engineering or other equivalent engineering disciplines (Electrical and Electronic, Controls etc.) 2+ years' experience in Electrical engineering. Advanced degree MAY be substituted for experience, where applicable. The field service engineer has experience and skills in various Unit & Generator Auxiliary Systems or show interest and ability to learn these systems. Preferred Knowledge/Skills, Education, and Experience Experience in Electrical Power Systems including MV/LV Switchgear, HV/MV/LV Transformers, UPS/DC systems, Generator Circuit Breakers, Generator Bus Ducts and Emergency Power Systems, Start-up Frequency Converter, Automatic Voltage Regulation, Excitation Systems – Static and Brushless, Synchronization, Generator Protection, Transformer Protection along with Measuring & Metering is a plus.

Alpharetta, GA, USA

Negotiable Salary

Workable

Sr Controls Engineer

Company Description: IS International Services LLC (IS) is a uniquely qualified business providing engineering services to customers of varying size and industry. We offer both engineering and project consulting services. Our engineers specify control system hardware, software design, along with I&C and electrical design on in-house projects. We specialize in system integration including PLC and DCS programming with expertise in many different platforms. Our process experience ranges from power generation, power transmission, factory automation, to oil and gas process automation. The successful candidates will have working experience in the automation industry, control panel design, and computer programming experience. Potential candidates will have the qualifications below: Operates and interacts with others at a high degree of integrity Self-motivated achiever Good written and verbal skills, able to clearly convey ideas and concepts to others Strong Studio5000 experience including: Ladder, Function Block Diagrams (FBD), Structured Text Systems with 10+ devices Peripheral device integration exposure including: barcode readers, RFID, etc. Moderate FactoryTalk View SE & ME experience Comfortable with virtualized environments Exposure to Manufacturing Execution Systems (MES) is a plus, not required MS Server, networking experience Control Panel Design and review PLC/DCS Hardware layout Communications: Ethernet, RS-232, RS-485, Serial Variable frequency drive and motor sizing for applications Supplementary protection Sizing wire, breakers, transformers, etc. Field start-up and commissioning experience Up to 25 % travel for commission projects outside the Atlanta area. Occasional weekends and overtime as is typical in the controls industry Ability to work from heights and lift occasionally up to 75 pounds Minimum of 12 years of related experience in the controls industry Responsibilities: The controls engineer will handle controls project related tasks with minimal oversight. The individual must be capable of working within a team environment on large distributed projects. Candidates must conduct them self professionally with their peers and with clients. The desired candidate will be capable of problem solving and troubleshooting issues related to controls projects. Requirements Education: Bachelor’s degree from a reputable engineering school in Electrical, Mechanical, Chemical, Industrial Computer or other related Engineering disciplines. Knowledge and Experience: The engineer should have a solid understanding of controls project design and implementation. Generally 12 years of successful experience in the controls industry. Candidates with advanced education will be considered in lieu of experience. Benefits Excellent compensations and benefits.

Lawrenceville, GA, USA

Negotiable Salary

Electrical Engineer - Protection & Controls63392033455235126

Workable

Electrical Engineer - Protection & Controls

Electrical Power Engineer – Protection & Control Location: Alpharetta, GA | Travel: ~40% (including air travel) Type: Full-Time | Experience: 4–8 Years Join a nationally recognized electrical power and control systems engineering firm, currently expanding its offerings in protection and control. We're looking for a highly skilled Electrical Power Engineer to join our Alpharetta, GA team. This is an exciting opportunity to work on advanced SCADA integrations, relay programming, and field commissioning for mission-critical electrical infrastructure projects. Key Responsibilities Configure and program SEL protection relays and RTACs, including data concentrator functionality, logic, and HMI development. Integrate electrical SCADA systems using platforms like OSI AspenTech or similar. Develop relay settings for GE Multilin and SEL relays. Perform field testing, onsite commissioning, and troubleshooting of electrical protection and SCADA systems. Create full electrical construction packages, including: Single-Line & Three-Line Diagrams Schematics / Elementary Diagrams Interconnection & Logic Diagrams Maintain accurate documentation for all protection, control, and SCADA configurations. Collaborate with Project Managers to ensure deliverables meet technical standards and budget goals. Provide after-hours technical support as needed. Assist in developing technical proposals and cost estimates for new project bids. Requirements Required Skills & Experience 4–8 years of hands-on engineering experience in protection & control systems. Proficient in SEL RTAC programming and SCADA system integration. Deep understanding of communication protocols: DNP3, MMS, GOOSE, and IEC 61850. Strong knowledge of relay settings, SCADA architecture, and HMI development. Familiarity with NEC, NESC, and IEEE 3000 series standards. Proficiency with ETAP, SKM, or EasyPower for power system modeling. Fluent in Microsoft Office tools, especially Excel. Excellent communication and documentation skills. Education & Certifications Bachelor’s Degree in Electrical Engineering required. Completion of the FE (Fundamentals of Engineering) exam. Benefits Benefits Competitive salary + discretionary bonus for hours worked beyond 80 biweekly. Flexible Benefit Time Off (BTO) – for vacation, sick time, holidays, or cash payout. Employee Stock Ownership Plan (ESOP). 401(k) with employer matching. Company-paid health insurance. Sponsored health club membership.

Alpharetta, GA, USA

Negotiable Salary

Landfill Field Technician63499965088515127

Workable

Landfill Field Technician

Essel Environmental is the go-to resource for responsive, high-quality environmental, engineering and emergency response services. We are looking for on on-demand Field Technicians to join our team! In the Burford, Georgia. We are looking for candidates with various experience levels who will be ready to make an immediate positive impact on their local communities. Entry-level position where employees gain basic knowledge of the health and safety requirements, terminology, processes, and equipment used in the operation, maintenance, and monitoring (OM&M) of various environmental control systems. The tasks assigned are typically less complex and more routine than those of Field Technician II. What we are looking for: Learns and becomes proficient in understanding and complying with policies and procedures, with a primary focus on: Injury and Illness Prevention Plan (IIPP) as it pertains to there Health & Safety program; Quality Management System as it pertains to the quality of our work; and, Standards of Business Conduct and Ethics as they pertain to our behavior as employee owners. Focus is on gaining the fundamentals to understand the operation, monitoring, and maintenance of various environmental systems. Work with senior staff in the planning and execution of assigned tasks, including daily Crew Activity Plans (CAP), monitoring, and/or adjustment of various environmental control system components. At the direction of senior staff, performs basic maintenance and repairs of various environmental control system components. Become familiar with the concepts of conducting field observations/actions and report those observations/actions by way of field notes and daily logs, which will be used by others to prepare verbal and written client communications. Through training, has gained basic knowledge to utilize field instruments to measure required environmental control system data, including calibration and proper care and handling of field instruments. Is required to participate in preliminary review of collected data with supervisor to gain an understanding of the fundamentals required to interpret field data. Work with senior staff to make operational adjustments to environmental control system components in conjunction with the results of preliminary data reviews. Receive training to utilize the appropriate tools, equipment, and materials to maintain and repair environmental control system components. Assists Laborers, Field Technician II, Senior Field Technicians, or other staff with the removal of landfill liquid pumps. Participate in training programs to enhance technical knowledge and stay up to date with industry best practices. Participate in and complete required Health & Safety training. We are looking for a Field Technician to service around different locations. You will operate, monitor and maintain gas migration control/recovery systems including gas well monitoring and adjustment, troubleshooting, and system repairs. Job Type: Full-time Pay: $20.00 - $25.00 per hour Schedule: 8 hour shift Weekends as needed Work Location: Georgia Requirements HAZWOPER 40 (Preferred) 1-2 years of environmental experience (Required)

Buford, GA, USA

$20-25