🔥🔥🔥HIRING NOW: CDL OWNER OPERATORS / WEEKLY PAY💲💲💲

Want to earn over $45K a year with bonuses and benefits for your entire family with a consistent 1st shift schedule? Sounds too good to be true? It’s not!    Learn new and in-demand skills that will last you a lifetime and earn more as you learn more! It’s time to start thinking long-term and secure your future at a company that takes good care of its employees!  Due to growth, Aalberts Surface Technologies is seeking 1st Shift Braze Technician to join the team at our Manchester, CT facility.   If you have 1 year of experience with furnaces or heat treatment operations this is a career you should explore!  Don’t let this opportunity pass you by.  Apply now! Some of the benefits to you:  Great Pay: Starting pay is $20/hour, with higher rates available for experienced candidates. Voluntary overtime is offered, along with regular performance reviews and merit-based increases.  Low and No Cost Benefits: The company pays 80% of medical premiums for the employee and their family! They also offer dental and vision coverage for employees and their families; 401k with matching; up to 2 weeks of vacation in your first-year paid holidays;  company paid disability coverage and life insurance.  PPE Provided: The company will provide you with all the PPE you need and a $225 safety boot allowance.  Great Full-Time Schedule: 1st shit!  Training and Advancement: You will receive lots of training and cross-training to learn new skills and be successful in your role. Plus, you can get educational assistance to take outside learning courses. There are also lots of opportunities to move up into higher-level roles down the road.  Job responsibilities:  Responsible for the application of filler metals, stop-offs, and fluxes per process sheets.  Follow written specifications.   Complete all paperwork and follow all instructions.  Inspect parts for compliance to specifications.  Operate related equipment, such as cranes, forklifts, and power tools when required.  Maintain accurate logs and monitor equipment to ensure it is producing the proper output.   Perform housekeeping duties to ensure a safe and clean workplace.  Uses personal protective equipment as required by the job, including but not limited to the wearing of a safety vest, gloves, and eye protection.  Perform duties safely, responsibly, and proficiently, observing and complying with all safety and health rules (OSHA, MTI, and SDS Standards), including safe operation of all equipment.  Exercise care and safety in the use of equipment and tools required to complete assigned tasks.  Report all accidents to the supervisor immediately.  Collaborate with manufacturers, internal departments, and support staff to accomplish both team and company goals.  Performs similar or related work as required, directed, or as the situation dictates and shall exercise any additional powers that are or may be legally conferred upon the position by the Shift Leader  About the Company: Aalberts Surface Technologies is the leading global surface technology service provider for improving material in terms of coatings and other surface technologies such as heat treatment for regional and global customers. We have been coating and heat-treating components for different industries such as the automotive industry, mechanical engineering or medical technology and can rely on know-how of more than 80 years. We specialize in heat treatments, surface treatments, polymer coatings, brazing, additive manufacturing, and post-processing. MUST be able to pass a drug and alcohol screen.  All qualified applicants will receive consideration for employment without regard to the individual's race, color, sex, national origin, religion, age, disability, genetic information, status as a military veteran or any other characteristic protected by applicable law.  All qualified applicants will receive consideration for employment without regard to the individual's race, color, sex, national origin, religion, age, disability, genetic information, status as a military veteran, or any other characteristic protected by applicable law.  For Job Seekers - Workrocket.com provides a fast and effective way to connect with great jobs. We work with a wide range of companies that offer excellent career opportunities. The industries we serve range from heavy construction equipment, HVAC, and manufacturing to medical and surgical equipment, accounting, finance and insurance just to name a few. Connecting Job seekers with great jobs is what we do. http://www.workrocket.com

We’re Hiring in Connecticut! Join us for our Aerospace Hiring Event on Tuesday, September 17th in Windsor Locks, CT. 📍 Location: Homewood Suites by Hilton Windsor Locks Hartford 65 Turnpike Rd, Windsor Locks, CT 06096 🕒 Time: 10:00 AM – 6:00 PM We’re looking for talented individuals ready to take the next step in their careers. Opportunities available across multiple departments — bring your resume and meet our hiring team! What to Expect: On-the-spot interviews Networking with hiring managers Insight into our company culture Refreshments and giveaways Free on-site parking Register here: 👉 https://forms.office.com/e/Fiyu4Tz0kt Don’t miss your chance to find your space in aerospace. We look forward to meeting you!

Trade school students, graduates, technicians, and mechanics are strongly encouraged to apply! Work Schedule: Actively hiring for 1st, 2nd, and 3rd schedules: •1st shift (Monday - Friday 7:30 am - 3:30 pm) •2nd shift (Monday - Friday 3:30 pm - 11:30 pm) •3rd shift (Sunday - Thursday 11:30pm - 7:30am) SUMMARY This position is responsible for machine setups, troubleshooting and preventive maintenance of all production equipment, as well as provide continuous improvement to the preventive maintenance process. Mechanic will have primary home department (Bindery or Insert). ESSENTIAL DUTIES AND RESPONSIBILITIES • Maintain safe work environment and follow all company safety protocols. • Perform Simple setups on machines in a timely manner. •Bindery: focus Spedo and H&H lines. Setups for 1 up, 2 up, wrap, interstack and slit/nest work. •Inserting: focus on WD and Epic lines. Setups for 4x8, #10, 6x9 – including friction/rotary feeders, double detection, thin and thick work, card attached labels, IMB camera, loading templates/modes •Read job recaps thoroughly and check jobs as to accuracy, reporting any error or discrepancy to the supervisor immediately •Clean machines prior to setups and inspect the machines as a preventive maintenance measure. •Maintain production standards. Report any production, quality or safety problems to the supervisor immediately. •Perform daily/weekly/monthly preventive maintenance on machines as necessary. Contribute to PM planning. •Perform minor electrical testing, such as, change fuses and fix broken wires. •Perform small parts replacement as needed: •Bindery: folder rollers, glue nozzles, feed rollers/belts, bearings, Spedo pin feeds •Inserting: feed rolls/belts, glue/water nozzles, minor transport repairs •Respond to machine problems throughout the shift. •Diagnose problems and perform minor repairs and adjustments as quickly as possible to avoid production delays. •Utilize MicroMain system for all repairs/parts. Follow all crib procedures, find parts (look up in system and locate), complete all paperwork etc. to ensure accurate parts inventory. •Move to other areas or perform other duties as directed by supervision. •Comply with company rules and regulations. •Maintain confidentiality of company-sensitive data. •Implement a commitment to quality philosophy and recommend methods and procedures to reduce cost and/or improve operating efficiency of the department. •Keep manager/supervisor informed of activities and situations that will affect the achievement of corporate or department goals and objectives. •Perform other related duties as required to achieve the goals and objectives of the department and company. WE ARE ACTIVELY SEEKING CANDIDATES WHO: • Can reliably commute to our Newington, CT facility Are available to work: •1st shift (Monday - Friday 7:30 am - 3:30 pm) •2nd shift (Monday - Friday 3:30 pm - 11:30 pm) •3rd shift (Sunday - Thursday 11:30pm - 7:30am) •Want to build a career with a stable family-owned company EDUCATION/EXPERIENCE •Trade school plus 1-2 years experience in machine repair or equivalent. COMPETENCIES •Ability to use basic hand and power tools, such as: •Standard and metric wrenches and sockets •Screwdrivers •Electric meters and testers •Saws •Drills •Electric sander/grinder •Machine shop tools •Experienced with standard and advanced tools •Computer literacy •Ability to comprehend parts/operator manuals. •Good Communication skills, verbal and written •Required technical expertise that can: •Read schematics and prints •Effectively read, follow, and comprehend technical manuals •Run and adjust machines

Finish Carpenter and / Installer wanted (Cabinetry) 📍 Location: Madera, CA – Travel Required within California | 🕒 Full-Time | 💼 Mainly Commercial Projects We are seeking a Finish Carpenter and / Installer to join our team for woodwork and cabinetry installation.

We are currently seeking reliable, detail-oriented, and self-motivated individuals to join our team as Independent Property Inspectors. In this role, you will conduct occupancy checks and property condition inspections on behalf of banks, insurance companies, and mortgage lenders. No prior experience is required—comprehensive training is provided. This is a 1099 independent contractor position, ideal for those who enjoy flexible scheduling and working independently in the field. ⸻ Responsibilities: • Travel to various residential properties to perform inspections and occupancy verifications • Take clear and accurate photos of each property • Complete digital or paper reports documenting the property’s condition • Communicate updates or issues with relevant parties as needed • Follow company protocols and adhere to deadlines ⸻ Requirements: • Reliable vehicle and valid driver’s license • Active cell phone with text/call capability • Access to a printer (for documents and route sheets) • Ability to manage time effectively and work independently • Willingness to travel to rural and urban areas ⸻ Key Skills: • Strong attention to detail • Good communication and interpersonal skills • Dependable, organized, and able to meet deadlines • Ability to follow detailed instructions • Basic computer literacy and comfort with mobile devices ⸻ Compensation: This is a pay-per-inspection role, with rates ranging from $4 to $8 per parcel, depending on location (rural areas typically pay more). Compensation directly reflects your effort—the more inspections you complete, the more you earn. ⸻ How to Apply: Due to fieldwork responsibilities, phone calls will not be accepted. If you’re interested, please text your name, a brief work history, and what attracted you to this position to: 📱 513-836-6059 Qualified candidates will be contacted to schedule a formal interview. Credentials can be verified upon request. ⸻ This opportunity is ideal for individuals seeking flexibility, independence, and performance-based earnings. Join us in helping protect and maintain communities through responsible property inspections.

This is a 28 hour per week job from 8:30am to 3:30pm Monday thru Thursday (26-28 hours per week grossing about $430/wk). The responsibilities include filing, posting bills, generating checks, assembling reports from fellow employees and organizing the paperwork for submission to the state. Some duties require use is MS Word, Excel and Publisher. The position reports to the person currently doing this work so there is good training and support. The office location is near Glenside and W Broad