Experienced Locksmith Needed (Boynton Beach)

Hammer & Hand is seeking experienced full-time Frame-to-Finish Carpenters, as well as Site Leads (lead carpenter and site supervisor), to join our Seattle team! Frame-to-Finish Carpenter Carpenter Qualifications • Approximately 5 years of custom carpentry experience including framing, envelope, and trim install • Experience with remodel and new build projects • Knowledgeable of materials, methods, and the tools involved in the construction of buildings and other structures • Must be able to keep accurate records and perform timekeeping, including electronic submittals • Must have reliable transportation, a valid driver’s license, and a clean driving record • Must have full selection of tools to perform the work • High level of accuracy and pride in your craft • Ability to lift 50lbs Site Lead Hammer & Hand is seeking a site lead to join its Seattle team. Successful candidates are goal-driven, organized, outside-the-box problem solvers with a keen attention to detail and the ability to manage a team and at least 10 years of experience. Site Lead Qualifications • Approximately 10 years of construction and carpentry experience • Approximately 5 years in an on-site project management role • Experience with high-end residential remodels and new build projects • Experience managing high-end commercial TI projects • Must have reliable transportation, a valid driver’s license, and a clean driving record • Must have full selection of tools to perform the work • High level of accuracy and pride in your craft • Ability to lift 50lbs • Self-motivated and able to motivate others • Well developed computer skills, including cloud based project management tools. Preferred Qualifications & Skills • Experience with cutting-edge building practices and high performance building. • Ability to use project management software. APPLY HERE: https://hammerandhand.com/careers/ No phone calls, please. Thank you for your interest! To apply, please submit an application through the link above, and we’ll be sure to reach out to you if we decide to move forward. -- About Hammer & Hand Established in 1995, Hammer & Hand is a general contractor celebrating 30 years in partnership with clients and architects in the Pacific Northwest. Our reputation is built on decades of dedication from individuals who are as passionate about their jobs as they are about their lives outside of work. Based in Portland and Seattle, our firm serves clients by empowering employees, harnessing 21st century building science, and advancing the tradition of craftsmanship. From classic remodels to design-forward commercial build-outs and high performance passive buildings, Hammer & Hand’s projects are crafted with care and built to last. We work hard to foster an atmosphere that supports our most valuable asset: our people. As such, we are proud to announce that we are on the path to 100% employee ownership. We offer a dynamic workplace, as well as a full range of benefits, including: • Competitive Industry Wages • 100% Employer Paid Medical and Dental Benefits • Optional Vision Plan • Alternative Health Care reimbursement program for chiropractic, massage, and acupuncture • 401k Retirement Savings Plan • Employee Stock Ownership Plan • Paid Time Off and Paid Holidays • Long-Term Disability Insurance • Profit Sharing • Employee Assistance Program We are always looking for the best talent to join our team and are aware that a great candidate for a job may come from a less traditional background. Studies have shown that women, LGBTQIA+ individuals, and people of color are less likely to apply for a job when they believe they may not meet all of the qualifications in a job description. We strongly encourage you to apply even if you’re not sure you meet every one of our qualifications. If you are unsure, you can contact us through our website with questions about how this would be determined. We do occasionally have openings for those looking to hone their craft and build their skillset. These are paid positions. Please do not hesitate to apply if you feel you have the aptitude to succeed with us! See more about our employment philosophy here: http://hammerandhand.com/about/employment/ Hammer & Hand is committed to equal opportunity in employment and does not discriminate based on race, color, creed, religion, sex, age, national origin, mental/physical disability, sexual orientation, gender identity/transgender status, military/veteran status, genetic information, or any other status/characteristic protected under applicable law.

Low Voltage Security Service Technician We know that a company's success starts with its employees. We also know that an individual's success starts with the right career opportunity. BOLD’s people-focused approach yields competitive advantage for our clients and rewarding careers for our employees. BOLD is run by an executive team that has a combined 45+ years of experience in low voltage electrical design, engineering, operations, and management. Working at BOLD you can have a buildable career while working alongside a fun group of dedicated employees. Here, employees don’t just have jobs, they build careers. That’s why we believe in offering a competitive pay and benefits package that rewards employees for their contributions to our success, supports all aspects of their well-being, and delivers real value at every stage of life. WHAT OUR FIELD TECHNICIANS ENJOY MOST Collaborating with a team of supportive peers and project managers Experiencing challenging work each day (this is not a desk job) Real opportunity to build a strong foundation for a career that progresses as you do Exercising on the job, from lifting weight-bearing equipment and gear Starting and ending time of shifts allow for commitments to be met after work. BOLD WAYS WE TAKE CARE OF YOU: Medical benefits including multiple plans that are low cost to you as an employee. With additional options for discounted coverage for you and your dependents. Dental benefit at a low cost.  Vision benefit at a low cost.  Mileage reimbursement at the IRS reimbursable rate.  Cell Phone Reimbursement for the actual cost of plan and phone.  Paid Holidays:   New Year's Day Memorial Day  Independence Day  Labor Day  Veteran’s Day  Thanksgiving Thursday  Thanksgiving Friday  Christmas Day  PTO/Sick Leave  Competitive starting salary, plus pay increases as you advance.  Progress through a defined career path, or move into roles like Lead Technician, Assistant Project Manager, or Project Manager.  All training and materials provided. Potential travel stipend for commute distance outlined in the Employee Handbook. Classes and opportunities for personal enrichment. Company provided PPE includes hard hat, safety vest, eye protection, and gloves. This job title comes with use of a company provided vehicle. (Must be coverable by company insurance to receive benefit). BOLD Low Voltage is a low voltage electrical contractor specializing in new construction multifamily residential construction projects. BOLD Low Voltage installs Fire Alarm, Access control, IP Video / CCTV and Telecom Systems. BOLD Low Voltage also completes Fire Alarm Test and Inspect, and Fire Alarm Service and Monitoring as well as completing Fire Alarm building annuals. BOLD Low Voltage is rapidly growing allowing our staff the opportunity for many avenues of growth. We strive to maintain a family-type atmosphere and are committed to the highest standards of quality and safety. JOB QUALIFICATIONS: Washington State EL-06 Electrical License. (preferred) Extensive Knowledge in CCTV & Access Control installation. (required) Valid driver’s license/reliable transportation. Company vehicle is included in this position must meet company’s insurance guidelines. (required) Ability to train and oversee potential apprentices. (required) Ability to work in a team and communicate effectively. (required) Strong communication skills verbal and written. (required) Ability to communicate with clearly and effectively with customers and coworkers. (required) Extensive knowledge of applicable electrical codes and standards. (required) Programming and Commissioning CCTV & Access Control systems. (required) Experience in IP Video (required) (preferred systems: Avigilon, Vivotek, etc...) Experience in Visitor Entry Systems (preferred) (preferred systems: Door King, Butterfly, Comlit etc...) Ability to problem solve independently and work through complex critical thinking pathways to provide solutions to the service calls. (required) Is highly organized and detailed oriented to document service calls meet compliance requirements. (required) ESSENTIAL DUTIES & RESPONSIBILITIES: Troubleshooting connectivity issues. Testing and labeling of wires and connectors. Ability to unriddle others work. Diagnosing and replacing devices and hardware. Ability to go into a service call with limited knowledge or data of a known issue and independently diagnose the root cause, propose how to fix the issue, and properly communicate to on-site staff the stage of repair. Termination of wiring (Cat 5e/6/6A, Coax, 14/2, 18/2 etc.). Terminations of CCTV, Access Control, and Visitor Entry Systems. Installing support structures for solutions (Racks, J-Hooks, conduits, etc.). Maintain a professional positive relationship with the customer and pass on needed information to the appropriate personnel for follow-up. Read and interpret various blueprints, diagrams, and submittals. Additional experience with fire alarm systems (preferred). PHYSICAL DEMANDS: Duties include the use of a ladder. May be asked to perform tasks that require long periods of standing, sitting, bending, twisting or reaching above the shoulders. May include driving to and from multiple service calls in one day. Repeated use of power tools. Ability to climb and descend stairs repeatedly throughout the workday. Candidate will need to frequently lift, pull, or push up to 50 lbs. Geographical Area: As a “Puget Sound” employee you will be asked to complete service work from Marysville area to Tacoma area. PRE HIRE REQUIREMENTS: Clean background check Clean drug screening Valid WA driver's license and good driving record SCHEDULE: 8-hour shift (standard) 10-hour shift Day shift Monday to Friday Overtime COMPENSATION: Full Time Employment. $35-$50/hr. depending on experience If interested in employment with BOLD please email Hiring@boldlv.com. EQUAL OPPORTUNITY BOLD is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Key words: Low Voltage, Telecom, Cabling, CCTV, Access control, Fire alarm, DAS, Electrician, Electrical, EL 06, EL 02, EL 01, Data Cabling, Apprentice, Cable, construction, Security, IP Video, EL-06, Wiring, Installer, Technician.

Autos Only Burien is looking for a full time Diagnostics/Lead mechanic to diagnose and repair our vehicle problems that arise from our safety inspections and customer pays. This job is for someone who has had very extensive experience in this position. We are looking for someone who is accurate in their diagnosis and doesn't guess multiple times on what is wrong with the vehicle. We also need a team player as we are a small store and it may require you to wear many hats. If you know that you qualify please send us your resume or give me a call. Thank you for your interest.

Auto Tech for Restoration Shop. MUST be dependable. Must be able to assemble cars in the correct way. Must be able to finish jobs in a timely manner. You must have experience working in an automotive shop. Paid hourly. Top pay for the right person. Paid hourly every week. Paid holidays paid sick days. The right person can make top dollar.

Reno Tahoe Steel Inc. is a full service structural, ornamental, and architectural steel company. We pride ourselves on a higher standard of safety, quality, and performance. Understanding the challenges and knowing what it takes to be successful, we believe our team is what makes that possible! We offer the following benefits and incentive package: • Paid health insurance including vision and dental • 1 Week paid vacation time • Up to 4% 401k match • Company Team events We are a growing company looking to fill the following position: Sheet Metal Fabricator/Installer Qualified Candidates should possess the following: • OSHA10 for Construction required • Team player mentality • Be at least 21 years old and possess a clean driving record • Experience with flashings, wall panels, standing seam roofs, general sheet metal fabrication, soldering, riveting, and layout. • Display proficiency with precision measuring equipment and shop math. • Ability to read and understand blueprints, written specifications, and/or drawings. • Possess the knowledge and experience with multiple fabrication techniques and the ability to recognize and correct problems. • Communicate effectively with their team as well as other departments to maximize productivity and efficiency • Ability to work in a fast-paced environment without supervision, keeping their work area clean and organized • Knowledge of sheet metal fastening. i.e., riveting, screwing, soldering, and caulking. Compensation range is $25 - $35 per hour, depending on experience.

LOOKING FOR EXPERINCED INSTALLERS,LEADMEN,SERVICE TECHS, MECHANICAL WATER PIPING TECHS WITH MININUM OF 2 YEARS OF EXPERIENCE IN A FIELD. WE ARE A BUSY, FAST GROWING COMPANY IN A COMMERCIAL HVAC INDUSTRY. WAGES ARE DEPENDING ON EXPERIENCE. WE OFFER PAID HOLIDAYS, 1 WEEK OF VACATION AFTER 1 YEAR, HEALTH, DENTAL AND VISION INSURANCE. MUST HAVE OWN TOOLS AND MEANS OF TRANSPORTATION TO AND FROM PROJECTS.WE DO MILITARY PROJECTS AMONG OTHER COMMERCIAL PROJECTS, SO A CLEAN DMV AND PAST HISTORY IS DESIRED. WE PAY DAVIS BACON WAGES ON MILITARY PROJECTS FOR THOSE WHO QUALIFY.