Browse
···
Log in / Register

Experienced Frame-to-Finish Carpenters ($25-45/hr DOE) (Portland)

$25-45/hour

2000 SE 10th Ave, Portland, OR 97214, USA

Favourites
Share

Description

Hammer & Hand is seeking experienced full-time Frame-to-Finish Carpenters to join our Portland team! Frame-to-Finish Carpenter QUALIFICATIONS • Approximately 5 years of custom carpentry experience including framing, envelope, and trim install • Experience with remodel and new build projects • Knowledgeable of materials, methods, and the tools involved in the construction of buildings and other structures • Must be able to keep accurate records and perform timekeeping, including electronic submittals • Must have reliable transportation, a valid driver’s license, and a clean driving record • Must have full selection of tools to perform the work • High level of accuracy and pride in your craft • Ability to lift 50lbs APPLY HERE: https://hammerandhand.com/careers/ No phone calls, please. Thank you for your interest! To apply, please submit an application through the link above, and we’ll be sure to reach out to you if we decide to move forward. -- About Hammer & Hand Established in 1995, Hammer & Hand is a general contractor celebrating 30 years in partnership with clients and architects in the Pacific Northwest. Our reputation is built on decades of dedication from individuals who are as passionate about their jobs as they are about their lives outside of work. Based in Portland and Seattle, our firm serves clients by empowering employees, harnessing 21st century building science, and advancing the tradition of craftsmanship. From classic remodels to design-forward commercial build-outs and high performance passive buildings, Hammer & Hand’s projects are crafted with care and built to last. We work hard to foster an atmosphere that supports our most valuable asset: our people. As such, we are proud to announce that we are on the path to 100% employee ownership. We offer a dynamic workplace, as well as a full range of benefits, including: • Competitive Industry Wages • 100% Employer Paid Medical and Dental Benefits • Optional Vision Plan • Alternative Health Care reimbursement program for chiropractic, massage, and acupuncture • 401k Retirement Savings Plan • Employee Stock Ownership Plan • Paid Time Off and Paid Holidays • Long-Term Disability Insurance • Profit Sharing • Employee Assistance Program We are always looking for the best talent to join our team and are aware that a great candidate for a job may come from a less traditional background. Studies have shown that women, LGBTQIA+ individuals, and people of color are less likely to apply for a job when they believe they may not meet all of the qualifications in a job description. We strongly encourage you to apply even if you’re not sure you meet every one of our qualifications. If you are unsure, you can contact us through our website with questions about how this would be determined. We do occasionally have openings for those looking to hone their craft and build their skillset. These are paid positions. Please do not hesitate to apply if you feel you have the aptitude to succeed with us! See more about our employment philosophy here: https://hammerandhand.com/careers/ Hammer & Hand is committed to equal opportunity in employment and does not discriminate based on race, color, creed, religion, sex, age, national origin, mental/physical disability, sexual orientation, gender identity/transgender status, military/veteran status, genetic information, or any other status/characteristic protected under applicable law.

Source:  craigslist View original post

Location
2000 SE 10th Ave, Portland, OR 97214, USA
Show map

craigslist

You may also like

Craigslist
SCREEN INSTALLERS " $1000 sign on bonus" (Palm Bay / Melbourne)
!! $1000.00 sign on bonus available for experienced Builders!! Lafferty aluminum and screening is currently in search of qualified screen installers. Positions available are: •Builders- Assembly/installation of pool enclosures/ composite rooms •Rescreen/Service crews- installation/replacement of existing screens, fasteners, and hardware on pool enclosures •Wraps/fill panel crews- installation of screen walls under existing trussed patios. We are looking for installers eager to join the Lafferty team with the ability to progress and take on more responsibilities with the company. Pay is extremely competitive I can almost guarantee if you join the Lafferty team and are a experienced/qualified installer you will make more than any other aluminum company in town. Show up to our shop any morning and ask the installers here. New installers with no experience can expect $17-22/hr based off work ethic. Experienced installers have the option for PIECE WORK and/or new installers can split the piece work with the lead on the crew. Job requirements: •(preferred)a valid drivers license •(preferred)a clean driving record for insurance •Must be able to lift 60lbs •arrive at shop Monday thru Friday at 7:30am •have good communication skills to interact with customers and other crew members. Please call 321-652-1078 for more information or stop by the office to meet the team! 2510 Kirby cir Palm Bay fl 32905 #106
1731 Robert J Conlan Blvd NE, Palm Bay, FL 32905, USA
$17-22/hour
Craigslist
Welder/Fabricator Needed
Superior Skilled Trades is seeking a Welder/Fabricator for a temp-to-perm opportunity in Titusville, Florida! Interested? Text "Titusville" to Jacob with SST at 321-418-6504 to get started! PAY: $23-$26/hr (Based on Experience) HOURS: 7AM-5PM, 40+ SCHEDULE: M-F DURATION: Temp-to-Perm START DATE: ASAP Job Summary: We are seeking a skilled Welder/Fabricator with MIG welding experience to join our team. The ideal candidate will be responsible for fabricating and assembling medium-sized welded components, ensuring all work meets quality standards and project specifications. Responsibilities include laying out, fitting, and welding steel components according to drawings and specifications. Candidates should be proficient in structural fabrication. Key Responsibilities: Perform MIG welding and fabrication on various metal assemblies. Operate welding and fabrication equipment safely and efficiently. Prepare, set up, and maintain equipment and work areas to complete tasks effectively. Read and interpret blueprints, drawings, and BOMs (Bill of Materials). Utilize measuring tools (e.g., tape measure) and layout tools accurately. Perform grinding, layout, and finishing work as needed. Inspect completed assemblies to ensure they meet quality and accuracy standards. Report fabrication issues and assist in resolving them as needed. Attend and participate in daily morning meetings. Requirements: MIG welding experience required. Ability to lift and carry up to 50 lbs regularly. Proficient in using hand tools, grinders, and measuring instruments. Strong attention to detail and ability to follow safety protocols. 1+ years of experience in welding and fabrication work Proficient in blue print reading and welding symbols Knowledge and experience completing welds that pass visual before being X-rayed or bend tested Additional Requirements for Welder/Fabricator: Must be eligible to work in the United States Must have reliable transportation to the job site Must be able to perform job duties that require standing, crouching, twisting upper body, working at heights, and lifting up to 50 lbs. unassisted. Position requires the use of PPE, including: Steel-Toe work boots, safety vest, hard hat, safety glasses, and gloves We are an Equal Opportunity Employer Hablamos Español! Llamenos a nuestras oficinas y pida comunicarse con alguien que hable español!
3330 Greenbriar Ct, Titusville, FL 32796, USA
$23-26/hour
Craigslist
FULL TIME AUTO Master Diagnostic TECH WANTED ASAP M-F NO WEEKENDS! (merritt island)
Inmon Automotive on Merritt Island is looking for a Technician with a strong diagnostic background! WE are offering top dollar for experience! We are passionate about employee satisfaction, providing an excellent working environment, quality tools, potential for advancement and growth and competitive pay and benefits. We are looking for an experienced, motivated automotive technician with desire to join our team. We are a busy, reputable shop with over 65 years in business. We pride ourselves in our transparency and customer satisfaction. We're firm believers that happy employees generate happy customers, and if you look at our 240+ Google reviews with a 4.9 star rating, our employees are happy as are our customers. Our ideal candidate is good at communication, able to address customer concerns, perform thorough safety inspections as well as maintenance inspections, give accurate diagnosis and perform a quality repair we can stand behind. Our technicians have the opportunity to work on numerous brands, makes and models. Our shop is a full service facility with repairs ranging from regular maintenance, suspension and steering, to in-depth engine repairs or electrical testing. As an automotive technician, our job is to inform the customer of any and all needs their vehicle has in order to be a safe and reliable means of transportation. Benefits: - Schedule that allows for a work life balance. NO WEEKENDS! NO LATE NIGHTS! - Closed on most major holidays (New Years, Memorial Day, July 4, Labor Day, Thanksgiving, Christmas Eve and Day) - Staff focused on teamwork and helping one another - Well lit shop - Paid vacation time (two weeks after 90 days) open ended PTO as needed - Training available and paid for. Online classes available - Competitive pay. - Company events and outings ( 2 minimum per year, more when goals are met or exceeded) - Ownership and management that truly does listen and act on each and every employee's ideas, criticisms or complaints. - More to come! What we are looking for: - Valid drivers license and clean driving record - At least two years of professional automotive maintenance/repair experience - Must be a team player and have a positive, professional attitude - Must own your own tools - Must have a strong work ethic - Must have a desire for improvement. Technicians are required to have a minimum of 2 ASE certifications within 90-days of hire. Company pays and reimburses for passed tests, as well as pay raise. If you're looking for a new opportunity, submit your resume today! Job Type: Full-time Pay: $30-40 per hour +. Flat rate Schedule: • Day shift • Monday to Friday • No weekends Weekend and after 5pm interviews available. Email your contact information and Resume to JP@inmonauto.com or call 321-453-3281 Check out our website www.inmonauto.com, and Facebook Join our professional team!
55 N Tropical Trail, Merritt Island, FL 32953, USA
$30-40/hour
Craigslist
REMODELING HELPER / APPRENTICE (Lake Villa)
Are you looking for a career in remodeling bathrooms with a growing Company that is busy all year long? If so then Re-Bath is the place for you! Re-Bath has grown to be the largest bathroom remodeler in the country. Re-Bath offers the best product in the industry which is patented and is supported by an office staff and installation team that is 1st in the industry. We are family owned and operated and we pride ourselves on a great work environment with the lead flow that comes with a large corporation. The helper role will assist the lead installation tech with the following tasks: The typical job involves the demolition of a current tub or shower base and tile walls, followed by installation of new tub and shower base, acrylic wall panels, and installing new trim. Other jobs require extended services such as installation of tile or vinyl flooring, installing vanity cabinets, faucets, mirrors, lighting, wainscoting, and re-setting toilets. Traits: The successful candidate will desire learning and developing their skills to grow into a lead installer position in the future. Will also have the following traits: MUST KNOW HOW TO READ A TAPE MEASURE. Ability to focus on quality, including cutting in straight lines, paying attention to the small details of remodeling jobs, and making clients satisfied Clean cut, neat, & dress appropriately A desire to learn new installation techniques, designed to increase the value of our remodels to clients, and increase our efficiency Assist multiple installers Know how to cut drywall, OSB, 2x4's and use multiple kinds of power tools. Assist with receiving and stocking in the warehouse Construction experience is required 2 years minimum Re-Bath will conduct background checks on all final candidates. All employees are required to have a current valid drivers license. Application question: How many years of carpentry experience do you have? Pay Rate $18 to $20 an hour Benefits Paid time off and health insurance Required: Construction experience, Driver’s License, Hand tools Preferred: Warehouse experience, stocking Please submit resume to apply for this position
18789 W Marion Dr, Lake Villa, IL 60046, USA
$20-22/hour
Cookie
Cookie Settings
Our Apps
Download
Download on the
APP Store
Download
Get it on
Google Play
© 2025 Servanan International Pte. Ltd.