Got Mechanical Skills? Little Experience needed**$21.00/hr!

Job Summary: We are seeking a detail-oriented and reliable Part-Time Assembly & Robotics Operator for a temporary position. The ideal candidate will be responsible for operating our robotic work cell and laser system. This role requires manual dexterity for loading and unloading parts and a commitment to maintaining a high standard of quality and efficiency. Key Responsibilities: -Set up and operate a robotic work cell according to established procedures. -Manually load and unload parts and materials from machinery. -Operate a laser engraving system to mark parts accurately. -Monitor equipment to ensure proper functioning and perform basic quality checks on finished parts. -Maintain a clean and safe work environment. Qualifications: -Ability to handle physical tasks, including standing for extended periods and manually handling parts. -Strong attention to detail and ability to follow instructions precisely. -Previous experience in a manufacturing or assembly environment is a plus but not required. Schedule: This is a Part-Time, Temporary (October 1 - December 31, 2025) position. While a base schedule will be set, preference will be given to applicants who have a flexible schedule and are available to work later in the day or on weekends as production needs require. To apply, please send: - A brief resume or a summary of work experience. - Your favorite food - Contact information (phone and email). - A short note about schedule and availability.

Resource Management Concepts, Inc. (RMC) provides high-quality, professional services to government and commercial sectors. Our mission is to deliver exceptional management and technology solutions supporting the protection and preservation of the people and environment of the United States of America. RMC is hiring for a Junior Inventory Management Specialist to support our customer onsite at NSWC Indian Head, MD.   The selected candidate will be expected to: Perform a wide range of substantive clerical/technical support work. Perform inventory accounting and control records entry and review, demand processing, requisition and re-supply, receipt and release of property, shipments, and management information recoverability. Perform periodic inventories of plant property, materials, and equipment. Gather information to support inventory records, discrepancies, and assist with corrective actions. Process disposal documentation as required, and post status record changes to maintain control of equipment dispositions. Process material receipts; enter data in the inventory control system; enter receiving and shipping documentation; and notify management of discrepancies with maximum supervision. Follow technical written procedures issued by the Federal Government for requisitioning, receiving, and storing supplies, repair parts, and equipment. Requirements A High School Diploma and (2-3) years of general work experience is required. An active DoD Secret clearance is required to start. The applicant selected may be subject to a security investigation and must meet eligibility requirements for access to classified information. Must have working knowledge of Microsoft Office Suite. Must be able to follow technical written procedures issued by the Federal Government. Must maintain a valid state-issued driver's license and be able to drive and operate a vehicle (car, truck, van). Must be able to lift up to 50 lbs. Benefits At RMC, we're committed to your career growth! RMC differentiates itself from other firms through its investment in our employees. We invest our resources to train, certify, educate, and build our employees. RMC can offer you a great place to work with a small company feel and give you the experience, tuition assistance, and certifications that will take your career to the next level. This also includes a competitive paid vacation package with 11 paid federal holidays. Additionally, we also offer high-quality, low-deductible healthcare plans, pet insurance, and a competitive 401K package. Salary at RMC is determined by various factors, including but not limited to location, a candidate's specific combination of education, knowledge, skills, competencies, and experience, as well as contract-specific requirements. The current salary range for this position will be $41,000 to $48,000 (annually). #LI-MB1

CoWorx Staffing is interviewing for upcoming jobs in the Malden, MA area! NO EXPEREINCE NEEDED! Positions available: Sanitation – Cleaning Production – Baking Finishing – Packing Mixing – Measuring dry goods, using mixing tools (hoppers) This role requires proficiency in English to complete documentation and follow safety instructions. Entry-level employees will receive coaching/mentorship from personnel, including Assistants, Operators, and/or Team Leads. Responsibilities: Arrive on time and ready to work the required hours, with the ability to work flexible hours and overtime, as required. Demonstrate and practice excellent personal hygiene and follow GMPs throughout all aspects of the job. Maintain clean and tidy work conditions and assist in the cleanup of the work area, as needed. Maintain the high standards with regard to food safety and food quality and deliver high quality results. Regularly lift, move, and or/push up to 50 lbs Maintain plant cleanliness according to the master sanitation schedule and document completed tasks as instructed. Assist in breaking down, cleaning, and setting-up various pieces of equipment using proper sanitation practices. Follow instructions and communicate problems as soon as they arise. Work in a safe manner and recognize/help correct any unsafe conditions. Support management in other related duties, as required. Desired Background/Skills: Must be 18 years old or older Must understand and follow Good Manufacturing Practices at all times Requires proficiency in English speaking and reading Good work ethic Transportation access (20-30 min away from facility would be ideal). Other Information: Don’t miss out on this exciting opportunity to join our hard-working and growing team – apply today! CoWorx is an equal opportunity employer dedicated to fostering a diverse and inclusive team. We believe that a varied workforce enhances our business outcomes and contributes to a brighter future for our internal teams, Field Talent, customers, and communities. We are committed to considering all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, or veteran status, and we do not discriminate based on disability.

Harco Fittings is a member of the IPEX group of companies. Our mission is to compete and grow using innovation, differentiation and extraordinary service. Harco Fittings LLC, founded in 1966 in Lynchburg, Virginia is a producer of gasketed joint injection-molded PVC and push-on gasketed joint ductile fittings. Our Harco locations span across seven states in the US and we are looking for new individuals to come be a part of a dynamic and growing team today! We currently have an exciting opportunity as a Fabricator. This role is based in our facility in Janesville, WI and reports to the Plant Manager. The hours are Mo-Fri from 5.30am until 2pm. The starting wage is $21.71 per hour.   Do not miss the opportunity to join a diverse group of people-centric professionals, thought leaders and rapid thinkers, entrepreneurs in spirit and status quo-fighters!   Job Summary Responsible for receiving, inspecting, and preparing parts for fabrication operations. Perform fabrication, assembly, and packaging operations. Principal Responsibilities Fabricate fittings to customer specifications using customized fabricating equipment, hand, power tools, adhesives, and fixtures. Obtain components from stock/production. Set-up equipment to match product requirements. Must be able to work in a team-oriented environment and demonstrate good communication skills. Inspect completed parts. Prepare parts for shipping by placing them in boxes or on pallets. Correctly label all parts and boxes as needed. Visually inspect all incoming pipes, components, and gaskets for defects. Apply 5S and Lean Manufacturing principles. Maintains a safe working environment by following Health, Safety and Environmental Policies and attending training that is provided where required. Maintains a respectful working environment by following Human Resource Policies and attending mandatory training when required. Assist in the coordination, preparation, and execution of year-end inventory. Completing and maintaining reports for managers as required, which may include: Production reports Scrap reports Other duties may be assigned when applicable. Requirements Previous experience in a manufacturing environment is strongly preferred, however, full training will be provided Must be knowledgeable in basic math Detail oriented with excellent analytical and problem-solving skills Must be a self-starter with good interpersonal and verbal communication skills coupled with an eagerness to learn Good team player including with a demonstrated ability to chip in to and foster a positive team environment Working knowledge of Health and Safety practices is helpful. After training, should exhibit an understanding of various types and sizes of pipes. Working Conditions Manufacturing plant environment Requires good mobility and involves considerable routine walking, standing for long periods, bending, and heavy lifting of 50 - 75 lbs. The use of hand tools including heat forming, pulling, belling, caps, reducer, saws, gluing Fast-paced environment where a considerable amount of sensory attention is required Benefits 401K plan with company match Comprehensive Health, Dental, and Vision coverage options Vacation and holidays Set schedule with bi-weekly pay Basic safety equipment (i.e. safety glasses, ear plugs) will be provided Reimburse COBRA costs while transitioning to IPEX benefits   IPEX is committed to providing accommodations for people with disabilities throughout the recruitment process and, upon request, will work with qualified job applicants to provide suitable accommodation in a manner that takes into account the applicant’s accessibility needs due to disability. Accommodation requests are available to candidates taking part in all aspects of the selection process for IPEX jobs. To request an accommodation, please contact HR at HR@ipexna.com. EOE.

Jewelry Manufacturing Company Located in Midtown NYC We are seeking a skilled: Bench Jeweler Diamond Setter Jewelry Polisher/Lapper Lapidary / Gem Cutter Starting $18-$30 - Compensation depending on skill - Candidate has chances of raises and promotions with proven skill and dedication. 纽约市中城区珠宝制造公司 现招聘熟练工： 珠宝镶嵌师 (Bench Jeweler) 钻石镶嵌师 (Diamond Setter) 珠宝抛光师 / 磨光师 (Jewelry Polisher / Lapper) 宝石切割师 (Lapidary / Gem Cutter) 起薪：每小时 18–30美元 （根据技能而定） 凭借技能与敬业精神，候选人有机会获得加薪和晋升。

Quality Assurance Technician-Label Control 3rd Shift Work Schedule 10:30pm - 6:30am, Sunday Night-Thursday Night $21/hour, plus $1.00/hour shift differential Allow me to introduce you to Kutol Products Company, we are a thriving hand soap and hand sanitizer manufacturer operating out of our Silver LEED Certified facility in Sharonville, Ohio. We process and package both cosmetic and drug formulas that work with our proprietary dispensing systems across the country and beyond. We are currently seeking a Quality Assurance Technician/Label Control Technician to join us in our purpose of providing “Clean Hands for a Healthy World.”  At Kutol our QA Technicians/Label Control Technician Provide oversight of the label area, including receipt, approval, issuance, counts, accountability and inventory.  Perform QA functions to include daily manufacturing cGMP inspection and balance/scale checks; product disposition; preparation of CoA/CoM; preparation, revision and issuance of standard operating procedures; preparation, revision and issuance of packaging instructions/specifications and provide support to internal and external customers in compliance with government regulations and customer requirements. Provide support during customer and regulatory audits. Provide support to the Incoming Inspection when necessary. The varied duties of this role allow team members to grow their skills, responsibilities of this position include: Perform visual and dimensional inspection of incoming labels using measuring instruments, specifications and drawings and determine compliance/release or rejection. Provide oversight of the controlled label area by performing receipt, approval, issuance audits, count verifications, inventory and reconciliation of labels.  Perform daily inspections of the Manufacturing areas and balance/scale checks.  Work with Manufacturing Management/Supervision to ensure quality issues are addressed. Review manufacturing records for disposition. Disposition Finished Product in SAP (i.e. Release, Reject, Quarantine). Review Work in Process, Reprocess and Rework requests for additional requirements and provide Quality approval to proceed. Review and Issue packaging instructions/specifications, formulas, Certificates of Analysis (CoA), Certificates of Manufacture (CoM) and CoA/CoM templates. Assist in writing/revision of Standard Operating Procedures (SOP’s). Issue SOPs for approval, distribute and keep SOP manuals up to date with current revisions. Maintain Master Manufacturing Records in accordance with regulatory requirements. Conduct quality investigations as directed and prepare findings. Provide support to internal and external customers. Support education of others in current Good Manufacturing Practices, applicable regulations, and company Continuous Improvement initiatives. Compile all required reports and documents on the performance of the above duties. Serve as back-up to QA Incoming Inspection when needed. Perform or assist with Internal Audits in compliance with cGMP regulations. Other projects or duties as assigned Requirements Education and experience: Bachelor’s degree in science or related field to meet FDA requirements for sign offs. 2+ years of quality experience.   Knowledge/Skills and ability: Knowledge and understanding of quality principles and cGMP compliance in a manufacturing environment. Working knowledge of various testing apparatus beneficial. Detail oriented and well organized; strong math, writing, and reasoning skills. Self-starter with ability to work and think independently. Effective communication and interpersonal relationship skills. Proficiency in Microsoft Office: Word and Excel. Writing skills with the ability to create procedures, packaging instructions/ specifications, cGMP documentation. Ability to interact and impact quality on the manufacturing floor and support customer requirements. Physical/Mental Requirements: Hand/eye coordination (computers). Combination: sit – 50% stand/walk – 50%. Ability to effectively balance and prioritize multiple tasks, deadlines and interruptions simultaneously. Lifting: Up to 40 pounds. Benefits As a company, we offer stability in a thriving industry and an environment that emphasizes our core values of respect, honesty and fairness. 3rd Shift QA Technician-Label Control hours are 10:30pm - 6:30am, Sunday night-Thursday night. Starting pay for qualified candidates is $21/hour plus $1.00/hour shift differential with a review and raise after 3 months, on your one year anniversary and annually thereafter. Kutol's benefit package includes medical, dental, vision, 401K and more including profit-sharing when we succeed as a team. Our TeamMates enjoy working at Kutol because of our shared-fate environment and stability as an established 100+ year old local company. Please note, we are a drug free & tobacco free workplace. Apply now and see why Kutol is a fantastic place to work!