Production Help – Sundays & Mondays – $20/hr (Ann Arbor)

Job description Job Duties Run aerospace furnace and watch parts. Communicate with plant department personnel effectively. Move materials and finished good as needed for production. Keep the work area clean and organized. Comply with all safety policies and procedures. Work independently. Ability to lift 50lbs or more. Run forklift. Punctual with great attendance * Job Type: Full-time Salary: Negotiable based on experience Benefits: 401(k) 401(k) matching Schedule: 12 hour shift 3 days per week x12 hours or 4 days per week x 12hours night shift 7p-7a Holidays Overtime Weekend availability

MUST BE ABLE TO DO THE PAPERWORKAND COMPUTER WORK, MUST HAVE GOOD WORK HISTORY. DRIVE FORKLIFTS, OVERHEAD CRANE. BILL OF LADING, PACKING SLIPS. 5:00AM-3:30PM MONDAY-SATURDAY. HAVE GOOD WORK ATTENDENCE. THIS IS A STEEL FABRICATION SHOP ENVIRONMENT. APPLY IN PERSON AT: LLOYD RICHARDS PERSONNEL 918-742-5300 4619 S. HARVARD AVE, STE. 105 TULSA, OK 74135 BRING RESUME, DRIVERS LICENSE AND SOCIAL SECURITY CARD TO APPLY FROM 9:00AM-3:30PM

Hiring for the following positions as soon as possible. Located in the West and South Tulsa Areas. Please send resume by responding to this ad, and/or please come in to interview M-Th 9:00am-4:30pm, walk ins welcome. ✔Sandblaster- Experience sand blasting on metals, to prepare for painting. Ideal candidate would have recent experience in this field. Pre-Paint/Sandblaster-Prepare metal parts for sandblasting $18.00-$20.00 Depending on experience, M-Th 7:00am-5:30pm with Friday OT ✔Material Handler-Previous experience working in a mfg warehouse, position will require using computers, inventory, driving forklift with oversized items inside and outside. M-Th 7:00am-5:30pm with Friday OT $18.00-$20.00 ✔Tube Roller-Experience running a machine that rolls sheets of metal to create tubes for heat exchangers. Load sheet metal into the machine and unload finished product. Required to use overhead cranes when needed. Will be lifting up to 50lbs or move, bend stand and stoop down as required. $20.00-$23.00+ Depending on experience. ✔Shop Helper- Previous fabrication shop and/or assembly experience setting up heat exhangers. Assemble heat exchangers per prints, use overhead crane,tape measure, assemble fans, connect frame using all types of hand tools.These positions do require ability to bend, stand and stoop over the course of the day. Ability to lift up to 50lbs as needed. Pay: $17.00 hourly Radial Arm Drill Operator -Previous experience running a radial arm drill, Will be required to set up and operate radial arm drill such as boring, reaming, and tapping placing holes into metal parts for heat exchangers. $20.00-$23.00 to start Hours: M-F 6:00am-2:30pm, Overtime as required! Resumes can be send by responding to this ad. Please come in to interview for these positions at Oklahoma Staffing Specialists 5649 S. Mingo Rd. Ste A M-Th 9:30am-4:00pm.

Hiring for the following positions as soon as possible. Located in the West and South Tulsa Areas. Please send resume by responding to this ad, and/or please come in to interview M-Th 9:00am-4:30pm, walk ins welcome. ✔Sandblaster- Experience sand blasting on metals, to prepare for painting. Ideal candidate would have recent experience in this field. Pre-Paint/Sandblaster-Prepare metal parts for sandblasting $18.00-$20.00 Depending on experience, M-Th 7:00am-5:30pm with Friday OT ✔Material Handler-Previous experience working in a mfg warehouse, position will require using computers, inventory, driving forklift with oversized items inside and outside. M-Th 7:00am-5:30pm with Friday OT $18.00-$20.00 ✔Tube Roller-Experience running a machine that rolls sheets of metal to create tubes for heat exchangers. Load sheet metal into the machine and unload finished product. Required to use overhead cranes when needed. Will be lifting up to 50lbs or move, bend stand and stoop down as required. $20.00-$23.00+ Depending on experience. ✔Shop Helper- Previous fabrication shop and/or assembly experience setting up heat exhangers. Assemble heat exchangers per prints, use overhead crane,tape measure, assemble fans, connect frame using all types of hand tools.These positions do require ability to bend, stand and stoop over the course of the day. Ability to lift up to 50lbs as needed. Pay: $17.00 hourly Radial Arm Drill Operator -Previous experience running a radial arm drill, Will be required to set up and operate radial arm drill such as boring, reaming, and tapping placing holes into metal parts for heat exchangers. $20.00-$23.00 to start Hours: M-F 6:00am-2:30pm, Overtime as required! Resumes can be send by responding to this ad. Please come in to interview for these positions at Oklahoma Staffing Specialists 5649 S. Mingo Rd. Ste A M-Th 9:30am-4:00pm.

Hiring Entry Level Warehouse Associates Duration: 3 month Project -- Start ASAP Location: Omaha, NE Pay: $17–$19/hr (depending on shift/department) | Weekly Pay | Lots of Overtime Available (about ~$2k per week with OT) Interested in a short-term contract with big earning potential and heavy overtime through the holiday season? If you're dependable, hardworking, and ready to make serious money—this is the opportunity for you. Job Duties: - Pack and label products accurately to ensure correct orders - Inspect coolers, packaging, and dry ice for cleanliness and defects - Follow safety rules and procedures to prevent damage - Weigh and place dry ice into coolers; reject defective ice - Apply correct shipping labels based on order type - Perform quality checks—aim to inspect 75 coolers per hour - Fix packing errors and document them - Maintain good attendance and punctuality Requirements: - Reliable transportation (car required; carpooling allowed) - Must be available Sundays - At least 3 months of warehouse or production experience - Able to work on your feet and lift up to 50 lbs - Comfortable in hot/cold environments - Steel-toed shoes required Schedule Expectations: - Schedules will change as the season progresses —flexibility is required - Expect 70–80 hours/week with lots of overtime - October & November: One shift only, 10:00AM – 7:00PM - Black Friday – December 13th: Two shifts — 7:00AM – 5:00PM and 7:00PM – 5:00AM - December 14th – January 8th: Two extended shifts — 7:00AM – 7:00PM and 7:00PM – 7:00AM - Day and night shifts available - 12-hour shifts, 7 days/week starting late November - Only holiday off: Thanksgiving (will work on all other holidays, no exceptions) To Apply: Email me directly with your resume and best phone number to reach you at. Positions are filling fast—apply now.

Applied Scientific Instrumentation (ASI) is a leading developer and producer of specialized microscope imaging systems. For over thirty years, ASI’s technology has enabled cutting-edge scientific research, advancing our understanding of the human body and the world we live in. Our systems can be found at leading research universities and laboratories across the globe. Oversee and manage the post-processing of precision machined parts. Operate vibratory and rotary tumblers, ensuring consistent surface finishes. Prepare machined parts for anodizing or other surface treatments/coatings. Potential to operate CNC machinery and assist other machine shop personnel with manufacturing. The ideal candidate will demonstrate: Strong attention to detail Excellent communication skills A willingness to learn and improve Preferred Qualifications: Experience handling expensive and/or fragile parts Understanding of general manufacturing processes Machine Shop Experience