RFIC EM Design Engineer

Install, connect, test, troubleshoot, and maintain electrical and mechanical systems Test and maintain electronic controls for machinery Test and assess motors, transformers, generators, electronic controllers on machine tools Perform and document preventative maintenance by periodically inspecting equipment, then locating and correcting problems before breakdowns occur Advise management of and make repairs to equipment in timely manner to minimize safety hazards, lost time, and excessive costs Replace items such as circuit breakers, fuses, switches, electrical components or wires Troubleshoot, and repair or replace mechanical components of our equipment as necessary. Use hand tools, power tools, and testing equipment in a safe and productive manner Set, hook up, and test equipment prior to startup of a given project, disconnect upon project completion May be required to perform additional duties as deemed necessary by supervision for the completion of the job in a safe and timely manner All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others, or damage to the equipment Requirements At least 1 year of electrical experience Ability to read and interpret construction drawings, specifications, and blueprints. Experience using standard electrician equipment (meters, gauges, hand tools etc.). Strong understanding of safety regulations and protocols in a marine environment. Excellent troubleshooting and problem-solving skills. Must be able to pass a 10-panel drug screen and background check Benefits CTS, LLC offers a comprehensive benefit packet to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability Job Type: Full-time Pay: From $28.00 - $35.00 per hour

Porterville Electric is seeking a skilled **Draftsman proficient in CAD** to join our team. - **Start Date**: Immediate for qualified candidate - **Hours**: Negotiable - **Compensation**: Pay is based on experience **Apply in person** at: Porterville Electric 334 South Main Street Porterville, California 93257 Monday – Friday, 8:00 AM to 5:00 PM We look forward to meeting qualified applicants ready to start right away!

New Flyer, the leading manufacturer of heavy-duty transit buses in North America, is excited to announce an opening for a Manufacturing Engineering - Electrical role on our 2nd shift team. The successful candidate Support all manufacturing engineering activities within assigned manufacturing cell(s) including implementing and facilitating lean manufacturing initiatives, implementing ECO’s, assigning inventory locations, conducting contract reviews, creating shop floor instructions, evaluating standards and completing capital and facility upgrades. Rate of pay will be $70,000 to $75,000. KEY RESPONSIBILITIES: Provide manufacturing engineering support and services within assigned manufacturing cell(s). Provide support as the acting Cell Leader in the Cell Leader absence.  Duties are as outlined in the Cell Leader job description. Work effectively as a cell team member to ensure operational metrics are achieved and any remedial action is actively pursued. Maintain current updates on manufacturing engineering related tasks on the manufacturing cell log. Represent manufacturing engineering within assigned cells at the daily cell meetings and weekly plant metrics meetings. Review relevant engineering change orders (ECOs) within assigned cells or assigned option groups and support all aspects of production implementation. Assign default locators to all parts within assigned manufacturing cells. Create shop floor instructions and hot sheets and train the necessary personnel on those standards. Update and maintain layouts (plant & cell layouts and inventory, housekeeping, emergency, & security maps etc.) Specify and facilitate capital and equipment upgrades, installations or modifications. Implement and facilitate lean manufacturing initiatives (5S, value stream mapping, set-up reduction etc.) Promote an environment of continuous improvement and team work. Lead or participate in SWAT team meetings, ensuring that necessary action is taken between cross-functional groups to resolve issues. Conduct process observations to ensure that assigned time standards are fair and consistent. Validate routings and submit and implement routing change requests to process planning where appropriate. Conduct contract reviews prior to contract start to ensure production preparedness per SR as assigned.  This review conducted as outlined in the New Flyer Work Instruction – Manufacturing Readiness Assessment.  Participate in Material Review Board (MRB) meetings as assigned, to assist with the disposition of non-conforming materials. Check engineering documents, coordinate Electrical Checkout Procedures with production staff, basic electrical troubleshooting with Electricians, Instructions to Service, Shop Floor Instructions and other documents as authorized. Initiate engineering change requests (ECRs) where appropriate. Participate in internal and outside supplier certifications and audits, as required. Requirements Bachelor’s degree in electrical engineering or a related field. Strong understanding of electrical manufacturing processes and quality control standards. Demonstrated experience with lean manufacturing principles and methodologies. Excellent problem-solving abilities and analytical skills. Strong communication and interpersonal skills for effective collaboration with diverse teams. Ability to thrive in a fast-paced, dynamic manufacturing environment. Availability to work the 2nd shift, 4:00 PM to 2:30 AM Monday through Thursday with flexibility for additional hours if required. Benefits 401k Matching up to 6% Competitive Health Insurance (BCBS) Dental Insurance (Employer paid through Delta Dental) Vision Insurance (Employer Paid through VSP) Paid time off Vacation accrual Employee assistance program Short/Long Term Disability Benefits 13 paid Holidays Take a look at the exciting work you can be a part of!  NFI Group | We Move People - YouTube  

Auto Cad skills for a CNC position Manufacturer of concrete outdoor furniture in need of help with drawing and CNC cutting architectural foam for packaging and molds, and other construction related activities. In shop, not remote Send resume or call with questions 805-801-5213 Thanks

H&H is offering an exciting opportunity for an Electrical Designer in our Annapolis, Maryland Office. With over 138 years of experience, H&H is a trusted full-service infrastructure engineering firm. Our clients, including infrastructure owners, contractors, and colleagues, rely on us for intricate and innovative engineering solutions. They trust our time-tested ability to manage the entire life cycle of a project, from the study and planning phase through to design and construction. With over 600 talented employees located across 30 offices nationwide, H&H can efficiently and effectively handle assignments of all sizes, types, and delivery methods around the country and across the globe. Responsibilities Perform assignments under the direct supervision of a professional electrical engineer Provide CAD support utilizing AutoCAD and Microstation for electrical system design for movable bridges and transportation structures Support the electrical department with design concepts and calculations for power distribution systems, industrial control systems, lighting, etc. Perform field inspections of electrical systems Write inspection reports to document system condition with repair recommendations Apply engineering principles to solve complex problems Requirements BS degree in Electrical Engineering or Electrical Engineering Technology Zero to two years of electrical engineering experience Knowledge and interest in industrial controls, power distribution, and lighting Experience with the electrical construction industry (residential, commercial building, lighting, etc.) (preferred) Hands-on experience (preferred) Excellent technical writing skills and attention to detail Experience with CAD to develop engineering drawings, AutoCAD or Microstation (preferred) Benefits Salary range—  $72,000-$75,000 annually. Salary commensurate with experience. We offer a professional work environment, a competitive salary, a benefits package, and 401(k). EOE M/F/DISABILITY/VETS

Full Time/Part Time Security Officers (San Jose, Gilroy, Morgan Hill) Looking for full time unarmed Security Officer. Must be able to work nights and weekends and walk outdoors if necessary. Requires a clean DMV record and a vehicle to commute to work. Energetic, personable, organized and detail oriented people will love this job. Please email your resume to info@capitalpatrol.com. REQUIREMENTS: Must have access to the internet. Must have a current Security Guard card, with a minimum eight hours of training. We provide Officers on going training at no cost. Must be able to work any day of the week, Monday - Sunday - Current California Guard Card and Drivers Lic.. - Must have Clean DMV history - 21 years of age or older. - Strong communication and writing skills - Must have a computer and e-mail, and cell phone - Good work ethics - Basic Computer skills and familiarity with Microsoft Office products. - A reliable vehicle for transportation